Method 1: Use an Electric Sharpener. Quality electric sharpeners are an option, but I strongly discourage their use. First off, they remove a tremendous amount of material from your edge. Sharpen your knife a dozen times, and you've lost a good half-centimeter of width, throwing it off balance, and rendering any blade with a bolster (i.e. most high-end forged blades) useless. Secondly, even the best models provide only an adequate edge. If you don't mind replacing your knives every few years and are happy with the edge they give you, they'll do the trick. But a much better choice is to...
The kind of tech we love: compact, reliable, durable, attractive and cheap. Purists may feel that other sharpeners will produce a more perfect result but for 99% of the human race this sharpener will be everything the doctor ordered. Your blades stay sharp for a good long time thanks to the 2-stage sharpening process and if you’re a left handed chef you’ll love the fact that it works just as effectively for you as for anyone else.
If you do not remove enough metal to create a new edge, you will leave some of the dull edge in place. A dull blade (or a blade with dull spots or nicks) will reflect light from the very edge of the blade. A razor sharp knife edge will not show "bright spots" when you hold it blade up under a bright light. You will need to remove enough material from the sides of the bevel so that the edge stops reflecting light.
Visually, a very sharp knife has an edge that is too small to see with the eye; it may even be hard or impossible to focus in a microscope. The shape near the edge can be highlighted by rotating the knife and watching changes in reflection. Nicks and rolled edges can also be seen, as the rolled edge provides a reflective surface, while a properly straightened edge will be invisible when viewed head-on.

Actually, the company contacted me to make sure I received the stones and that I was happy with them. Excellent service. The stones are great! I'm pretty much a novice so the clear instructions that came with the stones and the eBook instructions were wonderful. The eBook had quality pictures demonstrating the use of the stones and the written instructions were clear and to the point. Within minutes of opening the box I had the stones figured out and sharpening my AF survival knife, my pocket knife and a couple of my wife's kitchen knives...which included a very expensive chef's knife. Very satisfied with this product and highly recommend it.
A: Another issue that comes up with electric knife sharpeners is how to clean them. Or if, in fact, they actually need cleaning at all. The answer to the second question is that yes, they do need to be cleaned occasionally. And by occasionally we mean once a year or so if you use them with any frequency. Obviously if you’ve only used the sharpener a few times then there’s no compelling reason to clean it, other than just wanting to keep things tidy (and there’s nothing wrong with that). So, having established that sharpeners do need to be cleaned occasionally you need to know how to do so in a safe and effective manner. It’s not complicated.
"Sharpening is like a hangover cure," says Laurie Timpson, founder of Savernake Knives in Wiltshire. "If there was a cure and you knew about it, I'd stay at your house, crash on your sofa and have whatever it was when I woke up. Everyone would have it and there'd be no discussion. Everybody says they've created a perfect sharpening technique, and they haven't." 
If your knife is dull, we advise you to start with the diamond stone. After restoring the edge to original shape, de-burr the edge lightly with the ceramic stone in order to get a razor-sharp edge. Use no oil or water. Start by laying the blade flat on the stone, raise the blade spine approx. the thickness of the blade, and start moving the knife in circular motions.
Last, it should be noted that dual-sided Coticule/Belgian Blue whetstones are also sometimes available which have a layer of Belgian Blue stone on one side and a layer of Coticule on the other. Thus, these whetstones provide a softer, more coarse, grit on one side and a harder, finer, grit on the other. Plus, due to the inherent toughness of the Belgian Blue stone, these dual-sided stones do not require a substrate layer.
Selecting the right sharpening angle is the next step in sharpening. For more detailed instructions on selecting the right angle, try reading this article. Regardless of the method of sharpening, a appropriate angle should be selected. This angle doesn't need to be exact but following some general guidelines is a good idea. Most knife manufacturers recommend a roughly 20 degree angle. Depending on the use of your knife, you can move up or down from that angle. A fillet or slicing knife is never used on anything hard so an angle a few degrees less will produce a sharper edge. On the other hand, a survival knife with various uses can benefit from a more durable edge a few degrees larger.