first time buying a sharping stone. i bought this because i wanted to sharpen kitchen knives. you have to practice to get good at it, use a knife you don't care about because you might mess it up. there is some conflicting instructions online on how to use, water or no water. read as much as you can about using stones and practice, practice , practice. look up videos on youtube and internet. i had fun using it, BUY IF YOU WANT TO LEARN here is some stuff i found, they all sound like professionals http://video.about.com/culinaryarts/Sharpen-Knives-With-a-Whetston.htm?rd=1 http://culinaryarts.about.com/od/knivescutlery/ht/whetstone.htm this is a video that says don't use water http://video.about.com/culinaryarts/Sharpen-Knives-With-a-Whetston.htm?rd=1 this is a youtube video that i watched that uses water. *informative http://www.youtube.com/watch?v=KFIg9Cm-nJg
Naniwa also makes the Naniwa Traditional line of stones, these are less expensive than the Professional lineup and I believe were created to compete in terms of cost with some other brands such as King that are less expensive, more attractive to some who are just starting and may not want to invest a lot of money. I have tried the Naniwa Traditional 220, 1,000 and 2,000 grit stones and I thoroughly enjoyed them, so if you are considering a less expensive brand to get started, these are also good. I do not like them as much as the Professional line but I do like them, they work, they make the knives sharp.
While it may still feel like there is a lot to choose from, you don’t need a lot of of stones, you just a several good varieties to choose from. To summarize I will indicate below what my favourite stones are in each grit. Yes you can mix up the brands when sharpening but my recommendation is to buy a combination of 2-3 stones of the same brand and go from there.
A: Most chefs have their own personal favorite and that’s what it comes down to for just about everybody; personal choice. If you’re the kind who likes to get personally involved in the process you might want to opt for a stone or stick knife sharpener. These will allow you a certain amount of satisfaction knowing it was your expertise that produced the razor sharp edge. Others, however, are quite content to let the machine do the work and that’s fine too.
This is my first time ordering from hayneedle, but you came thru with flying colors. I was so happy to see the delivery come so quick as stated. It was just as i hoped it would be, i now have my whetstone sharpening stone, to really get my kitchen knives as sharp as i can get them. This to me is the best way to sharpen a knife, it takes patience but the reward is worth it. Thanks Hayneedle you rock!!! Ray D.
Grinding is generally done with some type of sharpening stone. Sharpening stones come in coarse and fine grits and can be described as hard or soft based on whether the grit comes free of the stone with use. Many sources of naturally occurring stones exist around the world; some types known to the ancient world are no longer used, due to exhaustion of former resources or the ready availability of superior alternatives. Arkansas, USA is one source for honing stones, which are traditionally used with water or honing oil. India is another traditional source for stones. Ceramic hones are also common, especially for fine grit size. Japanese water stones (both artificial and natural) come in very fine grits. Before use, they are soaked in water, then flushed with water occasionally to expose new stone material to the knife blade. The mixture of water and abraded stone and knife material is known as slurry, which can assist with the polishing of the knife edge and help sharpen the blade. Generally, these are more costly than oilstones. Coated hones, which have an abrasive, sometimes diamonds, on a base of plastic or metal, are also available.
In most cases a sharpening stone will be a combination of sharpening grains and a binding agent. However, in case of a Ardennes Coticule it is a completely natural product. The grains have cutting edges which enables them to sharpen your knife. As soon as a sharpening stone is used little pieces of the grains break off, revealing a new cut ing edge. The higher the number, the finer the grain. Stones with coarse grains (up to grain 400) can be used to shape the blade of a blunt knife. You can subsequently take care of the fine finish with a stone with a smaller grain.
The DuoSharp Plus stones are nicely sized at 8” long by 2 5/8” wide and have two grits on each stone to maximize value. The Plus in the name refers to an area of continuous grit in the otherwise interrupted grit surface of the stone. This area is for sharpening edges with fine points that might be difficult on the interrupted surface. A coarse/fine DuoSharp Plus stone is a good single stone to start a sharpening toolkit.
Our large selection of stones from many well-known manufacturers will allow connoisseurs to find the ideal stone for their needs. Because all manufacturers formulate their stones to emphasize a different mix of qualities, and because these qualities can vary widely between different stones, most woodworkers choose stones from several manufacturers to build up an optimal set of sharpening stones. Then again, once you get to know the characteristics of certain types of stone, you may find one supplier who will provide all the stones you need. Sometimes this can be an advantage. But there is no one size that fits all; each stone must fit your needs and work style.