The type and size of the blade being sharpened determines the size of the stone needed. In general , a 6" stone is considered a small sharpening stone, an 8" stone is a common larger size, and a stone larger than 8" (10"-12" are available) is considered generously sized. Stones smaller than 6" (3" and 4" stones are quite common), are considered pocket stones and can be used for toolboxes, tackle boxes and on-the-go sharpening, but are generally not recommended for regular sharpening jobs.

Turn around time is typically between 3 and 7 days. We offer same-day rush for an extra 50% fee. If you are in the industry and work with your knives please call the shop at 415 355 0773, we are able accommodate industry schedules, please be prepared to prove you use your knives or tools as part of your trade. Sharpening can be dropped off at the store on the corner of Guerrero and 18th, or mailed-in.
Second step: Now is time to do the actual sharpening. If you have a combination whetstone (meaning that it has two faces with different grit), you always need to start with the coarse grit, and then, the final polishing of the blade is done with a fine grit. While smootly sliding the edge of your knife's blade across the surface of the stone, try to always maintain a stable angle between the blade and stone (in between 15 and 30 degrees). You can use a sharpening angle guide to help you maintain the right angle at all times. 
✅ SAFETY : We understand the importance of safety when dealing with sharpening tools, your purchase comes with Silicone base for holding the stone inside Non Slip Bamboo base, this setup will ensure the stone is FIXED IN ONE PLACE while sharpening. And knife sharpening angle guide allows you to maintain CORRECT ANGLE and safely apply consistent pressure while sharpening the blade.
Once sufficiently wet, it's time to position the stone on something solid, so it doesn't move about during sharpening. Many come with holders, but you can just place it on a slightly damp tea towel on the table. The stone should be roughly perpendicular to your body, though Warner told me it is sometimes easier to angle it ever so slightly to the right (if you're right handed). 
BearMoo is a market-leader in the manufacture of top-grade sharpening stones for kitchen knives. This particular sharpening stone features a top grade dual sided construction which makes it ideal for sharpening of the edges as well as the polishing and finishing. The coarse side features 3000 grit while the fine side boasts 8000 grit for added convenience.
The grit range is important only in regards to the type of knives you will sharpen. It is entirely up to the consumer and how they utilize their knives. Obviously you want a stone that is capable of sharpening all your blades to the appropriate sharpness. As a rule of thumb, the higher the grit, the more you will be able to get the finest razor's edge. However, this might mean several more swipes back and forth along the stone, which can be quite time consuming.
Oil stones have been around a long time, and while not as popular as in the past, they are still a practical option. Not as fast as the other stones, they are easy to use and their lower price makes them a good value for the budget conscious. With oil stones, the relation of the types and grits can be confusing. Our article, Difference in Sharpening Stone Materials, provides a more in depth explanation, but in general an India stone or two combined with an Arkansas stone is a good combination to start with.
A well made and Versatile Chef's Knife I received this in 2 days with prime, and it arrived in perfect shape.This is a marvelous Chefs knife! I find it well balanced, and very sharp.It does require some knowledge on how to sharpen the one-sided bevel on the blade, but once you learn it's easy to maintain a razor sharp edge! I also really appreciate the wood box it comes in.The slight curve of the blade also makes it ideal to ""rock"" when finely chopping herbs. Very Pleased.
An extremely well written and informative article on sharpening. Overtime we all get to love certain stones for our sharpening needs. I am a huge coticule fan, and although i have used all the others, i always come back to this natural stone above all others. Still trying to figure if i chose it or it chose me! NEver the less there are so many options out there it is not hard with a little time and effort to find the right combination for your needs.
The answer to the question of how to choose a single whetstone from among the many is actually one of both purpose and expense. Indeed, as the old adage says: “You get what you pay for” – This is certainly the case with sharpening stones. In fact, as a general rule, a high quality, natural, whetstone is significantly more expensive than a man-made whetstone but, they also tend to produce a noticeably finer edge than man-made stones do. On the other hand, man-made whetstones (with the exception of diamond hones) are very affordable and, just like natural whetstones, they too are available in different grits for different stages in the sharpening process from cutting the initial edge bevel to polishing a finely honed edge.
This is a good size stone and has the two different grits needed for knife sharpening. No instructions were included, but there are many websites with written and video instructions, so this is not an issue for most people. A fair amount of dust is generated during the sharpening process, so protect the work surface and wash the knife after sharpening is completed.
For example, with Waterstones, they will need to be soaked in water before you use them. Most manufacturers will recommend you do this for at least 10 minutes, in tepid water. When you leave them in water, you will notice that bubbles will begin to rise to the surface, just for your information. As for oil-based stones, these need to be lubricated with some sort of oil. Now, it is advised to avoid cooking oils such as vegetable and olive oil. When doing so, also remember that a little goes a long way. You will only need to apply a small line of oil and simply spread it in afterward.
I've always wanted to sharpen knives on water stones, and this set gave me the motivation to finally give it a shot. The price is amazing for the quality and content of the set. It comes with all the grits you need to sharpen anything... I usually start on the 400 grit if the knife is very dull, or directly on the 1000 grit if it's not too dull. The 3000 and 8000 grit stones are softer and ideal after the coarser stones. The online learning section is truly amazing, much better than I expected. A convenient place with instructional videos and many articles about knife sharpening. Only downside is that the knives are now so sharp I need to be very careful using them... but that's a good thing! I feel like I fell in love with knife sharpening again.
For instance, American Novaculite (aka Washita and Arkansas Stones) is a form of metamorphic Chert that produces some of the best known and best loved natural whetstones in existence. Then, there is a form of Belgian Coticule which has been known for providing extra-keen edges since Roman times and, there is a Japanese Siliciclastic sedimentary stone (aka Japanese Water Stones) which consist of a fine silicate particles suspended in a clay matrix. Plus, there are also various types of man-made whetstones available such as Silicon Carbide (aka Crystalon) stones and Aluminum Oxide (aka India Stones) as well as a synthetic Corundum (aka Ruby) rod and Aluminum Oxide impregnated ceramic rods as well as several different types of diamond hones.
GimmeTasty.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Additionally, GimmeTasty.com participates in various other affiliate programs, and we sometimes get a commission through purchases made through our links.

However, it should also be noted that “water stones” are generally significantly softer than oil stones and thus, water stones generally cut faster than oil stones but, they also have to be flattened more often that oil stones do. Furthermore, it should be noted that some water stones must be soaked in water for several hours prior to use whereas, others are of the “splash and sharpen” variety and thus, they only need to be soaked for a few minutes before use and then wetted down occasionally during sharpening process. Diamond hones on the other hand are more durable than either water stones or oil stones and, because they generally have a more coarse grit, they cut faster than natural whetstones. Plus, due to their construction, they never need truing and, in fact, coarse diamond hones are often used to flatten both natural and synthetic whetstones.


"Sharpening is like a hangover cure," says Laurie Timpson, founder of Savernake Knives in Wiltshire. "If there was a cure and you knew about it, I'd stay at your house, crash on your sofa and have whatever it was when I woke up. Everyone would have it and there'd be no discussion. Everybody says they've created a perfect sharpening technique, and they haven't." 
These stones require oil application on them before using them. It helps with ensuring that the particles chipping from the blades do not remain on the stone. Stones that use natural oils are known as Arkansas stones. Lubrication is essential because it contributes to preserve the life of the stone and also ensure that it works efficiently. There are many different grits on oil stones that each function uniquely. Using the coarse and the medium grits removes the metal around the edges of the blade very fast. Oil stones are very lasting because they are from silicon or aluminum oxide. The sharpening surfaces remain flat for a long time due to the strength of these rocks. The only downside to oil stones is that you get oily when sharpening and that you have to buy oil.
I bought this stone to get my grand father’s straight razor back to being shave ready. Originally I was looking for a 4000/8000 combo but I liked the price and didn’t think the 3000 would be an issue. The stone arrived in a nice reusable package to keep to safe from breaking, along with a lap stone to keep the sharpening stone level. Prepping the stone was a beeeze and it didn’t take long before there was a true edge back on the straight razor. Definitely a good stone at an excellent price.
The Norton Wtaerstone 4000/8000 Grit is one of the world’s most popular knife sharpening stones. It is 2-side stone that performs both sharpening and polishing. It is a synthetic water stone designed to be softer than oil stones. Its 4000 grit in one face is used for maintaining and refining a cutting edge while its 8000 grit on the other face is used for polishing cutting edges. The norton wtaerstone is one of the best japanese sharpening stone.
Now move the blade – with a little pressure – in regular movements up and down along the sharpening stone. Always maintain the angle between the blade and stone. You will notice a burr become visible after five or so movements. Mentally divide the blade into three sections if the knife has a large blade. Always start with the tip and work back towards the bolster.
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer.

With its premium series Select II, the whetstone manufacturer Sigma Power Corporation from Tokyo addresses users of high-alloy steels such as HSS. These stones, too, are obviously intended to engender a grinding experience similar to that of natural stones. The special production process is expensive, but the Sigma Select II probably has no equal when it comes to demolishing steel.
"Sharpening is like a hangover cure," says Laurie Timpson, founder of Savernake Knives in Wiltshire. "If there was a cure and you knew about it, I'd stay at your house, crash on your sofa and have whatever it was when I woke up. Everyone would have it and there'd be no discussion. Everybody says they've created a perfect sharpening technique, and they haven't." 
Contrary to popular belief, the whetstone is not called so because it is soaked in water prior to sharpening. To whet an object means to sharpen; the soaking step aids in priming the stone for sharpening. The process of sharpening a blade with a whetstone is aptly called stoning. The water combines with the small particles in the stone to create an abrasive surface to grind the blade.
Sharpal 102N 5-in-1 Knife and Hook Sharpener features Sharpal 102N 5-in-1 Knife and Hook Sharpener features pre-set crossed carbides for quick edge setting and ceramic stones for fine honing. Multi-groove sharpening stone is designed to sharpen fishhooks of various sizes. It comes with rubber over-molded body and feet for secure and comfortable grip. Moreover integrated compass built-in rust-proof ...  More + Product Details Close
One more thing to consider before you proceed is if you would like to sharpen your knife freehand or use a guide such as the DMT Sharpening Guide. Your skill and experience in sharpening will help you decide on the method that's best for you. If you are experienced and comfortable with freehand sharpening, a knife guide may be unnecessary. On the other hand, a knife sharpening guide is an inexpensive and easy way to keep the angle consistent. If you have tried to sharpen before but never achieved the proper edge, we recommend using the sharpening guide. The guide can solve common mistakes in the sharpening process. If you choose to use a guide, please read our how-to for using the knife sharpening guide.
Know your stones: Whetstones are made with a range of materials, from ceramics to synthetics, or a cement-like conglomerate of finely ground stone. All whetstones are categorized according to grit, or coarseness. Rough stones have a lower grit count and are the first step in sharpening a particularly dull or chipped blade. Medium whetstones hover in the 800- to 2,000-grit range and are most often the first step in sharpening a knife. Whetstones with a grit count of 3,000 or above are referred to as finishing stones, and are used for refining and polishing.
The following are my personal favourites and they are all synthetic stones, I do have experience with natural what stones but lets keep it simple, lets stick to synthetic water stones. Believe me, some of the world sharpest knives are sharpened solely on synthetic stones. Here are my personal favourites, I use these water stones every day and the order is not necessarily in priority, they are all good.
Turn around time is typically between 3 and 7 days. We offer same-day rush for an extra 50% fee. If you are in the industry and work with your knives please call the shop at 415 355 0773, we are able accommodate industry schedules, please be prepared to prove you use your knives or tools as part of your trade. Sharpening can be dropped off at the store on the corner of Guerrero and 18th, or mailed-in.
Here at MyChefKnives, we are glad to be able to offer you a large selection of sharpening stones from some of the best brands of the market such as KAI, Kasumi, Wusthof, and more! Whether you call it sharpening stone or simply a whetstone, this is undoubtedly a very useful accessory in every kitchen, and it is a great option for unexperienced cooks that do not feel at ease using a sharpening steel. Given that not all kitchen knives are constructed in the same way, there are different types of sharpening stones that adapt to each different level of blade hardness and rigidity. However, due to the great number of options available, we can understand that choosing a sharpening stone is not an easy thing to do. Therefore, below we offer you a brief explanation that can guide you to choose the right whetstone for your knife.
As opposed to water whetstones that require you to pre-soak the stone, the Norton oil stone is pre-filled with oil to save time and eliminate the need to pre-soak it prior to use and the lubricant stays on the surface during sharpening.  The oil also prevents metal from bonding with the abrasive surface by flushing away dislodged abrasive and metal chips.
When using a sharpening stone, there are three keys to success. First, ensure that you are leaving a controlled edge angle on the knife blade by using an angle guide. Second, make sure that you establish an entirely new edge by sharpening until you raise a burr on the steel. Third, make sure that the new edge is smooth by honing or polishing the blade.
×