Push the point you want to sharpen with your fingers. While keeping the angle and pushing the point with your fingers, stroke the blade until it reaches the other edge of the whetstone, then pull the blade back until it reaches the edge of the whetstone. This back and forth is counted as one stroke. Repeat it for about five strokes until you can see or feel some small burrs (edge curvatures) Then move the position of your fingers to where you have not sharpened yet, and repeat this five strokes of sharpening processed from the tip to the base of the blade.
Very interesting. If you work flat, 45 degree is what I was taught. Love the wet stones, especially the oiled ones. The nice thing about the leather part, is the mirror finish on a razor sharp blade which is a must if doing fine wood working, carving etc. A rough blade simply does not have the fine detailed dexterity. I find that the oiled sandpaper can work great as well, but found that the refined clay bars (white refined fired clay rounds and flats etc) does a wonderful job of keeping those razor edges refined, smooth as possible and then one can high polish them for smooth cutting. Believe me, when working wood for a flute, one wants that refined edge.! Learning how to hone a blade on a flat surface teaches one to work outside without a table/wall handy too...:) But we all have to start somewhere!:) Anyway, great stuff and a great start for those who want more from their tools!:) Cheers!
The price of a whetstone is most often indicative of its quality, which directly correlates to how hard the stone is. “The more expensive stone, typically, is comprised of a harder material, which is efficient at grinding metal off of a good-quality knife,” Lau says. “It allows you to sharpen quicker [and] it allows you to sharpen a very high-quality knife, whereas a cheaper stone may not create a good edge if a knife is made from a very hard metal.” A well-made whetstone should cost $60 to $70.
About a year ago, we wrote an article on why every man should carry a pocket knife. A lot of you out there agreed that the pocket knife deserves a permanent place in every man’s pocket. After we wrote the post, we started getting emails from men who were first time pocket knife owners asking how to sharpen their new prized possession. Well today we’re going to answer that question.
I purchased this set as a gift to myself and my wife we both love to cook . It’s only been a couple of months we use them almost every day and the knives are excellent they are razor-sharp but I highly recommend you order the Whetstone for keeping them that way. I’ve used many different knives sets over my life and these seem to be by for the best quality.
A diamond plate is a steel plate, sometimes mounted on a plastic or resin base, coated with diamond grit, an abrasive that will grind metal. When they are mounted they are sometimes known as diamond stones. The plate may have a series of holes cut in it that capture the swarf cast off as grinding takes place, and cuts costs by reducing the amount of abrasive surface area on each plate. Diamond plates can serve many purposes including sharpening steel tools, and for maintaining the flatness of man-made waterstones, which can become grooved or hollowed in use. Truing (flattening a stone whose shape has been changed as it wears away) is widely considered essential to the sharpening process but some hand sharpening techniques utilise the high points of a non-true stone. As the only part of a diamond plate to wear away is a very thin coating of grit and adhesive, and in a good diamond plate this wear is minimal due to diamond's hardness, a diamond plate retains its flatness. Rubbing the diamond plate on a whetstone to true (flatten) the whetstone is a modern alternative to more traditional truing methods.
After several uses the Kamikoto is proving itself to be better than expected. As a professional I use different knives all the time and in fact have several thousand dollars worth of very fine blades of various manufacture. As it stands right now, if I could pick only one knife from all of them, I would take the Kamikoto. Fish, vegetables, raw meat, cooked meat, it handles them all very well and is a pleasure to use because of excellent balance and weight. And the edge… magnificent. Care and careful sharpening will be important, but then it always is with the finest of things. I would unhesitatingly recommend this product to people who appreciate the best. This is not a knife for fools or clumsy people. Buy, use, enjoy. And to the people at Kamikoto; “Thank You for making such a beautiful thing!”
Before you start sharpening, soak the stone in water for around five to 10 minutes, until it absorbs the water and a liquid film appears on the surface. After soaking, splash some water on top, and re-splash during the process if it ever gets too dry. You'll get a dark, splotch of steel and stone building up on the stone while you're sharpening the blade. This is totally normal so just splash the stone with some water to clean it off and allow it to perform more efficiently.
It is believed that Vikings suspended these knife sharpening tools from their belt. However, it is not exactly clear, even to scholars, how the Vikings wore these pendants. We laced ours with a versatile, adjustable high-quality leather cord and packed it in a USA-made muslin pouch so you get to choose how to wear it or carry it. Wear it around the neck for the most Ragnariest looking necklace you’ve ever seen, cinch it all the way down so that it can be hitched to your belt or clipped onto your pack, or simply pocket it while still contained in the hand-stamped muslin pouch.
"Sharpening is like a hangover cure," says Laurie Timpson, founder of Savernake Knives in Wiltshire. "If there was a cure and you knew about it, I'd stay at your house, crash on your sofa and have whatever it was when I woke up. Everyone would have it and there'd be no discussion. Everybody says they've created a perfect sharpening technique, and they haven't."
Now it's time to polish. This is when you'll swap over from the coarse grit to the finer grit (make sure this side is wet, too). I found the knife still had a bit of grime on it, so I gave it a wipe clean beforehand. The motion is exactly the same as with sharpening, but you can apply slightly less pressure, and limit to roughly 30 strokes on each side.
These are unquestionably great starter stones. After all the sharpening done over the course of a couple days, they're still perfectly flat, showing little to no signs of wearing down. Mind you I did watch tons of how-to videos online before undergoing the endeavor, so I knew how to try to make the stone wear evenly. But, my 15 year old nephew who was working on the Ontario, as I told him he could have it, if he wanted to fix it up, didn't watch all those videos and I didn't see any uneven wear on his stone after working it about a half hour either.