This coarse grit whetstone is great for prepping old and dull knives that need to be sharpened with a fine grit stone. One of my good knives edge looked like someone had tried to chop barbed wire. After ten minutes on each side of the stone, the edge was smooth and free of imperfections. After it hit the knife with the fine grit stone, I was cutting onions and apples like hot butter! I would soak this stone for 12-24 hours before using. It sucks water like a sponge. The surface needs to be damp when you sharpen.
100% Brand NewA fine-grained whetstone lubricated with oil, used for fine sharpening.The Ruby sharpening stone and Agate Stone,For Polishing,Sharpening.Can Make Mirror surface, mirror finish.The Ruby Sharpening stone is made from sintered crystals of synthetic ruby.It’s extremely hard, maintain their shape well and are resistant to wear.Size:50*25*10mm(1.97*0.98*0.39 inch)Model:3000 & 10,000 GritColor: red & whiteMainly used in industrial instrumentation, precision parts, miniature knives, stones, measuring tools, cutting tools, instruments, carbide, etc.Package included:1x Two Sides Jade SharpenerNote:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error i.

You’ve probably seen a number – say 1000 – on the side or top of the Whetstone you just bought and are at a loss as to what it all means, or even worse the person who sold it to you, didn’t know or forgot to mention it. Which ever of these scenarios sounds about right, you are left with a stone and no idea how you should be using it, well let me enlighten you dear reader.

Excellent wet stone for the home for someone with wet stone experience. Well designed plastic storage box doubles as stand for the wet stone. In use, the stone sits securely in a pliable gasket that fits in the plastic stand. Stone size is good for kitchen knives, dual grit works as advertised - lower number for cutting and higher number for finishing. Quickly put a keen edge on my knives. As this is a wet stone it is important to submerge the stone in water for about 10-15 minutes prior to use.and keep it wet during sharpening. It's a little messy to use and clean up is necessary to remove sharpening residue from knives, stone and surrounding area. Inexperienced sharpeners should use the angle guide provided in this kit and keep in mind it is far easier to keep a knife sharp than it is to put a sharp edge onto a very dull knife. I did not "register" with Makarto which is required to get their free Knife Sharpening Guide; instead I found instructions on the Web.
Method 3: Use a Sharpening Stone. This is the best method by far. Not only will it give you the best edge, it also removes the least amount of material. With a fine enough grit, your knife should be able to take hairs off your arm when you've finished. Additionally—and I'm not kidding about the importance of this one—the act of sharpening your knife will help you create a much stronger bond with your blade, and a knife that is treated respectfully will behave much better for its owner. The only problem? It takes a little know-how.
This is an excellent stone for sharpening any knife especially given it has the two sides (1000 and 6000) so it’s basically 2 stones in one which cleaned up the dull edge of my favourite knife in no time. The knife guide takes all the guessing out of trying to work out the correct angle which I needed. The other thing about the Mikarto whetstone kit is the base which doubles up as the storage for the angle guide and fixing stone so you don’t loose them when stored away and also has a the rubber feet to stop it moving when being used no. I think it’s a bargain for the price especially with the amazing packaging which makes it perfect for a gift for anyone that likes cooking and loves their knives. Highly Recommend!

Contrary to popular belief, the whetstone is not called so because it is soaked in water prior to sharpening. To whet an object means to sharpen; the soaking step aids in priming the stone for sharpening. The process of sharpening a blade with a whetstone is aptly called stoning. The water combines with the small particles in the stone to create an abrasive surface to grind the blade.

Once sufficiently wet, it's time to position the stone on something solid, so it doesn't move about during sharpening. Many come with holders, but you can just place it on a slightly damp tea towel on the table. The stone should be roughly perpendicular to your body, though Warner told me it is sometimes easier to angle it ever so slightly to the right (if you're right handed). 
As opposed to water whetstones that require you to pre-soak the stone, the Norton oil stone is pre-filled with oil to save time and eliminate the need to pre-soak it prior to use and the lubricant stays on the surface during sharpening.  The oil also prevents metal from bonding with the abrasive surface by flushing away dislodged abrasive and metal chips.
The unique three stone system features a 6" medium Arkansas, 6" fine Arkansas and 6" coarse synthetic stone mounted on a molded plastic triangle with handles on the end for easy stone selection. The sturdy molded plastic base has non-skid rubber feet for safety, a V-shaped trough to catch oil drippings and easy-to- read stone identification markings.
×