Now that you're holding the handle and the blade is in position, gently apply some pressure to the belly of the blade with your left hand fingers – "roughly the amount of pressure to semi depress a sponge," says Warner. Starting at the tip, glide the blade up and down the stone – around five strokes up and down is a good number. Then move to the middle – five more strokes. Finally five strokes up and down on the heel.
3. Place the knife blade flat on the stone and raise it to a 10 to 15 degree angle. The key to knife sharpening is maintaining a constant angle. Different knives require different sharpening angles. For a pocket knife, shoot for a 10 to 15 degree angle. This will give you an edge that’s sharp enough for most daily needs, but not sharp enough to perform heart surgery. Keeping a constant angle by hand takes a lot of practice. If you’re having difficulty, you might consider investing in a sharpening guide. It takes all the guess work out of maintaining the needed angle. They cost about $10.
Oilstones, like the Norton whetstone, can be made out of natural or synthetic material like Novaculite, Aluminium Oxide, or Silicon Carbide. As per the name, oilstones require the use of oil as you sharpen your knife's blade. This type of stone is slower at sharpening or honing a blade and it can be messy and you need to always have some oil on hand but it creates a nice sharp edge and a beautiful polish.
Chefs will do this every day, and there's no reason you shouldn't too. Before cooking, or after you've done the washing up, honing your knife will help keep it in good condition. "When you're using a honing steel, you're not actually removing any metal at all, just re-straightening that edge, to get it back in line," says Authbert. Remember that you'll still need to sharpen it every two or three months.
The more you use the sharpening stone; the edges of each particle within the stone tend to become slightly rounded over time. When you notice that it is taking much longer to hone blades and edges, it means you need to replace the stone with a new one. Sharpening stones come with decks that make it convenient to keep the tool in balance on the stone.