Therefore, the first step to choosing a whetstone is to determine your intended purpose and then choose your whetstone accordingly. For instance, when sharpening tools that do not require a fine edge, you should choose a relatively soft, coarse, stone such as a Norton Crystolon water stone. However, for sharpening tools that do require a fine edge, a somewhat harder Norton India oil stone would be a good choice. But, for sharpening hunting knives where an exceptionally fine edge is required, a Novaculite or Coticule oil stone would be the best but, most expensive, choice. So, the process of choosing the correct whetstone for any given purpose is to first determine how fast you would like for the stone to cut and how fine an edge you need, and then choose either a soft, coarse, stone or, a hard, fine, stone of the appropriate type and grit.
Best purchase I every made. while my knife doesnt cut a fine layer of tomato without touching it, it became as good as it was when I purchased. I recommend users to learn how to properly sharpen the knife. It took me about 30 minutes to sharpen a single knife to what it is today. The knife gets really sharp. Also, with use, the surface gets uneven. I recommend you draw a grid in pencil and then file using the grinder stone until the grids disappear. This ensures the surface remains flat during all use.
To use Al's method, take a black felt pen and shade in the bevel of the knife. Then take two strokes on the stone and examine the edge. If you have maintained the proper angle then all the black will be gone. If you see black on the top of the edge it means you are holding the back of the knife too far from the stone. If there is black on the bottom of the edge but the top is clean then you are laying the knife too flat on the stone and you need to raise it a bit. Repaint the edge and try it again. Once you discover what the right angle looks like then just maintain that.
The video above, from the How To You YouTube channel, explains everything you need to sharpen with a whetstone at home, and the best methods for doing so. Obviously, you’ll need a whetstone (as well as a few other things), and you’ll want to work near your sink or a bucket so you have easy access to water. Fill a container with water, then soak the whetstone in it until it stops bubbling. Inspect your blades for any trouble spots, and get to sharpening using the methods and motions described in the video; making sure to check your progress as you go. We’ve talked about sharpening knives with whetstones before, but this guide is a bit more thorough and the old video has since been removed.
A: That depends almost entirely on how often you use them. If you are a professional chef who uses his or her knives every day then you should hone them every time you use your knives. But honing has its limits and over time your edge is going to become dull no matter what. Therefore your knives will need to be sharpened at least several times a year. Some chefs, in fact, will use a whetstone on an almost daily basis in order to ensure their knives are always razor sharp. Most of us, however, are not professional chefs and may not even touch our kitchen knives for days at a time. In that case, it’s probably a good idea to hone the edge after every couple of uses and have your knives sharpened once a year.