Sharpal 102N 5-in-1 Knife and Hook Sharpener features Sharpal 102N 5-in-1 Knife and Hook Sharpener features pre-set crossed carbides for quick edge setting and ceramic stones for fine honing. Multi-groove sharpening stone is designed to sharpen fishhooks of various sizes. It comes with rubber over-molded body and feet for secure and comfortable grip. Moreover integrated compass built-in rust-proof ...  More + Product Details Close
We’re happy to present something everyone has been waiting for – a combination diamond/ceramic whetstone that will handle all your sharpening needs. The newly-developed DC3 and DC4 whetstones consist of a fine diamond stone (25 micron) and a very special ceramic stone, made of synthetic sapphires. The advantage of these materials, although they get worn, will still keep their flat shape this is important when you sharpen your knife. And, since these materials are the hardest we know of, they will sharpen any steel, even these extremely hard powder steels. You don’t need any lubrication for these stone but now and then you should consider cleaning them with warm water and liquid soap. The stones might feel coarse from the start but will become smoother/better after some use. A leather pouch is included.
A: People often make the mistake of assuming that just because a mechanical knife sharpener will sharpen the edge of a knife that means it will sharpen any type of cutting edge, including scissors. This is a mistake and can wind up being a costly mistake when you have to replace both your scissors and the knife sharpener. There are sharpening devices specifically designed to handle scissors. Or you can bring your scissors to a sharpening pro who will usually have the right equipment on hand to also sharpen scissors. Another thing to keep in mind about trying to use a sharpener to sharpen scissors is that by using the device in this fashion you are likely voiding the warranty. As such if you damage the device trying to sharpen scissors you’ll need to pay to have it repaired or replaced as the warranty won’t cover it. Also, certain types of high end scissors also come with a warranty. And, just as with the sharpener itself, if you try to sharpen them using a mechanical sharpener you can say goodbye to the warranty protection. The bottom line is to always use the appropriate tool for the job at hand. That way you’re assured of the best possible result and any warranty remains in effect.
The kind of tech we love: compact, reliable, durable, attractive and cheap. Purists may feel that other sharpeners will produce a more perfect result but for 99% of the human race this sharpener will be everything the doctor ordered. Your blades stay sharp for a good long time thanks to the 2-stage sharpening process and if you’re a left handed chef you’ll love the fact that it works just as effectively for you as for anyone else.
This is great combination but you don’t need them all to get started. As your budget allows, start with one stone and although I like to start with a coarse stone, the 400 Chosera is a little coarse to start the learning process with and you would need another stone in a higher grit to finish. So if you want to start with one water stone, and that is perfectly okay, select the 1,000 grit stone, it will deliver an edge that will startle you, with practice of course. Also, just having a water stone in your possession is going to motivate you, trust me.
Ceramic sharpening stones were the early replacement for natural stones. Unfortunately there are huge differences in the quality of ceramic stones so be wary. Some are extremely soft and dish out very quickly and at the other end of the spectrum some are so hard they tend to glaze over in a hurry. Ceramic stones need a good soaking for about 10 or more minutes to saturate the pores of the stone prior to use. As all knife steels are different we tend to find that ceramic stones tend to work better with some knives over others. There are no hard and fast rules but we like ceramic for Ao-ko and single edged knives. The Kaiden Ceramic stones are the fastest cutting Japanese stones in Australia and are recommended for advanced users.
I can personally verify that this will get your knives very sharp. I will spare you all the gory details, but the picture is of the instructions the ER sent me home with after stopping the bleeding and patching me up. I have to say, that’s not what I had in mind regarding “Thanksgiving tips”. So: not only will knives slide easily through spinach, but they will go through finger and fingernail like a hot knife through butter after being sharpened by this whetstone. Very clean, straight cut. Impressive, really. Just take it slow and don’t be a moron like me.
A: For many years there was a heated debate around this topic with manufacturer’s stating flatly the notion their products actually damaged knives was absurd, and many professional chefs claiming not only was it not absurd, it was common for mechanical sharpeners to damage expensive cutlery. So who was right? To a certain extent they both were. The manufacturers were correct in asserting that if you followed the instructions to the letter there was little if any chance your knives would be damaged. However, in reality few people actually followed the instructions to the letter and when they veered from the recommended course the potential was there for damage.
While it may still feel like there is a lot to choose from, you don’t need a lot of of stones, you just a several good varieties to choose from. To summarize I will indicate below what my favourite stones are in each grit. Yes you can mix up the brands when sharpening but my recommendation is to buy a combination of 2-3 stones of the same brand and go from there.
Furthermore, Novaculite consists of several different layers of stone of different densities, grit sizes, and colors. Thus, the red Novaculite layer (aka Washita Stone) is the both the softest and most coarse while, the next most coarse/hard grade is the grey/white Soft Arkansas stone; both of which cut relatively fast for a hard whetstone material and thus, they are an excellent choice for refining a bevel. Then, the next grade of coarseness/hardness is the hard Arkansas stone which is used to polish the bevel rather than define it and, last there are the grades of Hard Black and Hard Translucent Arkansas stones which are used for extremely fine honing and polishing of a cutting edge. Plus, it’s also the primary material in “Charnley Forest” (English) and “Turkey” oilstones.
So, as you can see, there are numerous different types and grades of whetstones on the market today and each has its advantages and disadvantages. Therefore, the right practice to choose the right sharpening stone for you is to choose a whetstone material based upon how fast you need to remove metal and how fine an edge you need. For instance, although they are often the most expensive type of whetstone, diamond hones generally cut the fastest even in their finer grits followed by Crystolon Stones and then India Stones which are then generally followed by Japanese Water Stones and then by Novaculite, Belgian Blue, and Coticule whetstones in terms of how fast they remove metal. However, it should also be noted that the rougher an edge is, the less sharp it is while, the more polished an edge is, the sharper it is and thus, rough edges are fine for some tools while other tools require a much finer edge and, hunting knives require the finest edge of all. Therefore, the trick to choosing the proper whetstone for any given sharpening purpose is to purchase multiple stones with varying grits to accomplish each given task from cutting an initial bevel or defining a damaged edge to refining an existing edge to polishing it. We hope this article helped you. Feel free to leave a comment below if you have questions.
This set of two Norton combination waterstones provides four grits and also includes a flattening stone as an added value. The 220, 1000, 4000 and 8000 grit sides will handle everything from aggressive shaping to final polishing. They are 8" long by 3" wide, big enough to handle most knives and tools easily. Our most popular waterstone kit, this has everything you need to both sharpen with waterstones and maintain the stones themselves. A great starter set.
Sharpening on the other hand is reupholstering the furniture or telling the hair stylist to give you a new look. Material is going to be removed from the edge of the blade. There’s no way around it. How much is removed will be a function of just how dull the knife has become or whether you’re sharpening to compensate for a chip in the edge or because the tip has broken off. If your knife is not damaged and you have it sharpened twice a year very little material will be removed each time, yet it may still be enough for you to notice just by looking carefully with the naked eye.
The more you use the sharpening stone; the edges of each particle within the stone tend to become slightly rounded over time. When you notice that it is taking much longer to hone blades and edges, it means you need to replace the stone with a new one. Sharpening stones come with decks that make it convenient to keep the tool in balance on the stone.

However, because the Belgian Blue stone generally occurs in relatively wide columns with much thinner layers of Vielsalm Coticule on either side adjacent to the slate, the Belgian Blue stone is more plentiful that Coticule and thus, it’s somewhat less expensive. But, it’s also somewhat softer than Coticule and is not divided into different grades as Coticule is. Furthermore, because it is a softer stone than Coticule, it is sold without a substrate layer.

×