100% Brand NewA fine-grained whetstone lubricated with oil, used for fine sharpening.The Ruby sharpening stone and Agate Stone,For Polishing,Sharpening.Can Make Mirror surface, mirror finish.The Ruby Sharpening stone is made from sintered crystals of synthetic ruby.It’s extremely hard, maintain their shape well and are resistant to wear.Size:50*25*10mm(1.97*0.98*0.39 inch)Model:3000 & 10,000 GritColor: red & whiteMainly used in industrial instrumentation, precision parts, miniature knives, stones, measuring tools, cutting tools, instruments, carbide, etc.Package included:1x Two Sides Jade SharpenerNote:Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error i.
Some recommended products may use affiliate links. ProHuntingKnife.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc or its affiliates.
Sharpening stones have been around since the dawn of civilization for a very good reason: they work. Yes, they’re more labor intensive than most electric sharpeners but they also allow you an unprecedented level of control. Once you get used to something like the Fallkniven DC3 Diamond/Ceramic Whetstone Sharpener you may never take out your electric sharpener again.
Cutting angle – With a manual stick or sharpening stone you set the angle yourself so this does not factor into the equation when choosing that type of sharpener. When shopping for an electric sharpener however it does. You’ll want to decide if you want your knives to have the 15 degree “Asian” style angle so that you can make precise cuts or the Western standard 20 degrees or 22-degree sharpening angle. Most people will opt for the 20 or 22-degree angle simply because their cuisine doesn’t call for a lot of finesse from their knives and those knives are probably of a heavier Western variety anyway.

This is my first time ordering from hayneedle, but you came thru with flying colors. I was so happy to see the delivery come so quick as stated. It was just as i hoped it would be, i now have my whetstone sharpening stone, to really get my kitchen knives as sharp as i can get them. This to me is the best way to sharpen a knife, it takes patience but the reward is worth it. Thanks Hayneedle you rock!!! Ray D.

Select the grit of the stone. Sharpening stones are available with different grit sizes. For example, you can choose fine, medium and coarse stones. You should use a coarse stone followed by a fine grit if your knives are dull. If your knives have been sharpened recently or they aren't too dull, consider using a medium grit. Try to use a grit level ranging from 325 (for coarse) to 1200 (for extra fine).[3]
Therefore, the first step to choosing a whetstone is to determine your intended purpose and then choose your whetstone accordingly. For instance, when sharpening tools that do not require a fine edge, you should choose a relatively soft, coarse, stone such as a Norton Crystolon water stone. However, for sharpening tools that do require a fine edge, a somewhat harder Norton India oil stone would be a good choice. But, for sharpening hunting knives where an exceptionally fine edge is required, a Novaculite or Coticule oil stone would be the best but, most expensive, choice. So, the process of choosing the correct whetstone for any given purpose is to first determine how fast you would like for the stone to cut and how fine an edge you need, and then choose either a soft, coarse, stone or, a hard, fine, stone of the appropriate type and grit.

At age 10, Terada learned the basics of sushi from his father and then went on to attend RKC Chef's School in Kochi, Japan from 1987-1989. He soon earned a nickname for his fast knife, attention to detail, divine presentation and ability to create new dishes and accents based on traditional Japanese cuisine. After graduating RKC Chef School, he was called to serve under Master Chef Kondo at Yuzuan restaurant in Kochi, Japan from 1989-1992. Mr. Kondo is the master of Kansai style cooking, considered to be the high-end of Japanese cuisine. Terada earned the title Master Sushi Chef by becoming the standing head sushi chef & can serve Fugu (Japan Licensed) to the public.
Your task as a sharpener is to remove that fatigued metal and expose the steel underneath, the fresh strong steel and bring side A and B of the knife together at the Apex precisely, sounds easy doesn’t it? Like peeling a layer off and having a fresh start, over and over. Of course there is much more to it than this but in very basic terms, you want the abrasive properties of the water stone to abrade the fatigued metal away, like an eraser.
Hi Caide, our most popular stone at the moment is our Grunwerg 1000/3000 grit whetstone from speaking to our customers it’s definitely down to the pretty competitive price, but also they have said that the finish on the knife is just as good as some of our more expensive ones, the main difference is it doesn’t seem to last as long. For one that does last and leave a good finish then our Minosharp 1000 grit whetstone is also popular.
Put the pointed, narrow end of the sharpener up against the open end of the gut hook. The narrow, pointed end of the sharpener should face in toward the thickness of the blade, away from the edge of the gut hook. Match the angle of the sharpener to the original edge angle. This will maintain the correct sharpening angle and prevent you from getting cut by the blade tip. Hold the same angle when sharpening each side of the gut hook.
Just keep at it and concentrate, visualize that edge and bevel as you sharpen and keep in mind what you are trying to achieve. You need to do this on both sides, for me, I found that the hardest part, getting the other side of the knife to match the side I started on. I start on the right side of the blade at the tip and work my way towards the heel. When I do the “back” of the knife, I start at the heel and work towards the tip.
Hold the knife in your right hand (or left) with your index finger along the spine of the knife and be comfortable, hold it tight enough so it doesn’t move as you sharpen but you don’t need a death grip on it. Wear shoes and if possible stand on a mat that will absorb the impact of the knife if you drop it. (You won’t drop it but be safe…..move your feet if you drop it!).

Very handsome and functional. The leather that makes up the necklace is high quality and the knot they use is seldom seen. I was able to touch up my bark River gunny sidekick with it( m4 steel at 62-64 hrc!), And that is saying something. Haven't tested the fish hook groove, because I don't generally fish in the winter, but I'm looking forward to trying it out
Oil Stones differ from water stones in that they require the use of honing oil to float the swarf (metal particles). Also, these stones are commonly made from one of three different materials consisting of Novaculite, Aluminum Oxide (Corundum), or Silicon Carbide (Carborundum) and they all use oil to lubricate the stone and suspend the swarf in order to prevent the stone from becoming clogged. Also, while Novaculite and Coticule are the most traditional types of oil stones, there are also synthetic oil stones made by the Norton abrasives company called “India Oil Stones”.
✅ SAFETY : We understand the importance of safety when dealing with sharpening tools, your purchase comes with Silicone base for holding the stone inside Non Slip Bamboo base, this setup will ensure the stone is FIXED IN ONE PLACE while sharpening. And knife sharpening angle guide allows you to maintain CORRECT ANGLE and safely apply consistent pressure while sharpening the blade.
However, due to limited natural deposits and extensive quarrying over the centuries, true, high quality, Japanese water stones are now few and far between and are very expensive. Thus, various companies are now producing synthetic Japanese Water Stones which generally have a more consistent composition and grit size than natural stones as well as often begin somewhat harder and thus, lasting a bit longer; not to mention being cheaper to purchase.
at the end, metal is going to vanish. Don’t start with a Dollar Store knife, start with a medium quality 8 inch (203mm) that has not been sharpened beyond the factory before you. You want to set the sharpening stage for success, a cheap knife is hard to sharpen because of the inferior quality of the steel. Now if you are worried about scratching the blade of the knife, you shouldn’t be but if that apprehension is going to distract you, eliminate the fear by taping the blade of the knife with painters tape, just the blade, not the edge.
The truth is that there is no one recommendation that we can make that will meet everyone’s needs. Every sharpener’s needs are different and every sharpening toolkit will be different. In order to help beginning sharpeners get started with good sharpening stones to build around, we need to understand their individual needs. So with that in mind, let’s look at the basic needs of a beginning sharpener.
It is sometimes too confusing on understanding the right sharpener that right to our tools. Then using the chart above you can consider on what is the right stone. Green, red, yellow and blue line they consist of the most familiar and affordable models of sharpening stone to purchase. You can see the performance of each stone in the chart. Silicon Carbide, Aluminum Oxide, and Arkansas they are typically used with the oil (Oil Stones). Waterstones (Synthetic Waterstones) are generally made of Aluminum Oxide too, then people also use oil in place of water with their Waterstone or use water on their Silicon Carbide sharpening stone in place of oil. In this group, Waterstones is the most preferred because of its easy for sharpening edges in shorter time.
Manufacturer contacted and sent a new one for replacement. Great customer service but replacement item was nicked on the corner. It was still usable so i didn't bother to ask for another replacement. I would recommend item to be shipped in another box instead of an over-sized yellow envelop which is not adequate protection. Item sharpen my knife pretty good though..
In most cases a sharpening stone will be a combination of sharpening grains and a binding agent. However, in case of a Ardennes Coticule it is a completely natural product. The grains have cutting edges which enables them to sharpen your knife. As soon as a sharpening stone is used little pieces of the grains break off, revealing a new cut ing edge. The higher the number, the finer the grain. Stones with coarse grains (up to grain 400) can be used to shape the blade of a blunt knife. You can subsequently take care of the fine finish with a stone with a smaller grain.
A sharpening stone is a stone that has got a coarse side and usually a finer side, and that is going to take and re-shape your edge and get it back down thin enough in order to sharpen it. You are basically taking something that is blunt and thinning it back down. You have to remove all of this extra metal and get it back down to where it is thin enough to cut. Very simply, all a knife is is a very thin piece of steel to split whatever you are cutting. If the knife is obviously thicker, it is like trying to cut something with a chisel; it is not going to happen.

Our large selection of stones from many well-known manufacturers will allow connoisseurs to find the ideal stone for their needs. Because all manufacturers formulate their stones to emphasize a different mix of qualities, and because these qualities can vary widely between different stones, most woodworkers choose stones from several manufacturers to build up an optimal set of sharpening stones. Then again, once you get to know the characteristics of certain types of stone, you may find one supplier who will provide all the stones you need. Sometimes this can be an advantage. But there is no one size that fits all; each stone must fit your needs and work style.
Actually, the company contacted me to make sure I received the stones and that I was happy with them. Excellent service. The stones are great! I'm pretty much a novice so the clear instructions that came with the stones and the eBook instructions were wonderful. The eBook had quality pictures demonstrating the use of the stones and the written instructions were clear and to the point. Within minutes of opening the box I had the stones figured out and sharpening my AF survival knife, my pocket knife and a couple of my wife's kitchen knives...which included a very expensive chef's knife. Very satisfied with this product and highly recommend it.
We regret that due to technical challenges caused by new regulations in Europe, we can for the time being no longer accept orders from the European Union. If you reside in the UK you can continue to order from our UK websites or shop from our locations and partners. Visit West Elm at www.westelm.co.uk and Pottery Barn Kids at www.potterybarnkids.co.uk.
When you sharpen a Buck Knife properly it will perform the way it was meant to. Never sharpen your knife on a power-driven grinding wheel not specifically designed for that purpose. You could burn the temper from your blade making the edge brittle and prone to chips or cracks. This also voids the warranty. The first step to knife sharpening is to pick a sharpener.
Siliciclastic stone is a clastic, noncarbonate, sedimentary stone that is almost exclusively silica-bearing and exists as either a form of quartz or, another silicate mineral. In addition, hardened clay is also a sedimentary stone but, it is formed from organic materials such as plant and animal matter and thus, it is much softer than Siliciclastic However, when silicon sediment is suspended in a clay matrix and then naturally hardened over thousands of years, it forms an excellent whetstone material; although, it is somewhat softer than Novaculite. Thus, because the geology of Japan once held large deposits of this type of stone it has been used for hundreds of years for sharpening tools, knives, and swords. However, unlike Novaculite, Belgian Blue, and Coticule, both natural and synthetic Japanese whetstones use water for lubrication and thus, they are commonly known as “Japanese Water Stones” because this type of stone is very porous. Thus, natural Japanese Water Stones must be soaked in water for up to twenty-four hours prior to use whereas, synthetic Japanese Water Stones can be soaked for only a few moments.

I bet those Vikings, relatives of mine no doubt, never had it so good. They never had surated blades to sharpen or needed to wear cool things around their necks to woo the women (they just grabbed them by the hair I guess). I love my stone. So useful and beautiful. I always have spit to wet it with, and I always have a way to sharpen my tool. Wazoo makes high quality products. I give them the highest rating I have. Dudes!
My name is Peter Nowlan, a retired Naval Officer. I became interested in Knife Sharpening 35 years ago starting on oilstones after watching my father sharpen a chisel. It was a trial and error thing at that time as there was no internet back then and nobody I knew had the same interest. I started my business, New Edge Sharpening, in Halifax (Canada) to make extra money just to feed my obsession with water stones but the business took off and I am truly enjoying an abundance of dull knives to sharpen.
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer.
I've been using this stone for months and have started to find that, while the fine side does provide a nice sharp edge, the 400gr side is wearing my knives unevenly, which causes me to be unable to finely sharpen the entire length of the blade when moving to the fine side. The logo that is put in the middle of the 400gr side of the knife is causing more material to be removed than the rest of the blade when I'm sweeping across. I even verified this by going straight down the length of the fine side and watching the wear pattern come from the material coming off of the knife onto the stone.
There will be a drawer that extends into the mechanism under the abrasives. Any detritus from the sharpening process drops into this drawer. Exactly where the drawer is located will differ from sharpener to sharpener but it shouldn’t be hard to find. Remove the drawer flick any material into the wastebasket and then wipe out the drawer with a damp cloth or tissue. You may want to use work gloves and goggles to protect your hands and eyes from any loose metal shavings. Once the drawer is clean and dry replace it. The exact means by which the sharpening mechanism itself is cleaned will vary from manufacturer to manufacturer. Consult your owners guide for specific details. Make sure you don’t introduce any grease or other lubricants into the sharpener unless specifically directed to do so by the owner’s manual. Also, the outside of the sharpener should come perfectly clean with just a damp cloth. Avoid using commercial cleaners or abrasives of any kind.
We’re happy to present something everyone has been waiting for – a combination diamond/ceramic whetstone that will handle all your sharpening needs. The newly-developed DC3 and DC4 whetstones consist of a fine diamond stone (25 micron) and a very special ceramic stone, made of synthetic sapphires. The advantage of these materials, although they get worn, will still keep their flat shape this is important when you sharpen your knife. And, since these materials are the hardest we know of, they will sharpen any steel, even these extremely hard powder steels. You don’t need any lubrication for these stone but now and then you should consider cleaning them with warm water and liquid soap. The stones might feel coarse from the start but will become smoother/better after some use. A leather pouch is included.

Keep your knife razor-sharp with a high-quality sharpening stone. We offer a wide variety of sharpening stones, such as Arkansas stone, Diamond stone, Bench stone, Water stone and more. Whether you own a pocket knife, a hunting knife or a kitchen knife, a sharpening stone is essential for preventing your blade from becoming dull.  Most of our sharpening stones are lightweight and portable, so you can use them at home or take them with you wherever you go.


Both Belgian Blue and Vielsalm Coticule are ancient stone layers found in the Belgian Ardenne Mountains with characteristics similar to both Novaculite and Siliciclastic sedimentary stone in that it is a metamorphic stone consisting of both gray and yellow volcanic ash mixed with tiny Spessartite Garnet crystals suspended in a clay matrix. However, due to its geology, both types of stone occur only in vertical seams sandwiched between two thick layers of bluish-purple slate and thus, they must be meticulously extracted mostly by hand. However, this type of extraction process is both very time-consuming and very labor-intensive and, quarrymen can only extract the stone for a few months each year due to inclement weather conditions. Consequently, both Belgium Blue and Coticule whetstones tend to be somewhat expensive.
Understanding Grit: You’ll see a bunch of numbers being thrown around when discussing the grit of a sharpening stone. The number refers to the size of the grit. The larger the number, the finer the grit. A good beginner stone would be a two-sided stone with #400 and #1000 grit. The #400 grit is the courser stone for working out the nicks and imperfections, the #1000 grit is for refining.
Cut a wine cork so that it measures .5 of an inch and use that as your visual guide. You can keep it at the end of your water stone and rest the spine of the knife on it so that you can see what that angle looks like. Now this is all pretty nifty but you still have to learn to move that knife over the water stone holding it at that angle, whether you chose 20 or 15 deg, making the template is the easy part, stabilizing that angle is where practice is crucial. You can hold the knife with that wine cork in place and that is the angle you want sharpen at but now that piece of cork has to go, you’re on your own. I have taught many many people to sharpen a knife and believe me, this particular part of the process is not as hard as many people believe! In fact as you start actually sharpening the knife you will become quite motivated to succeed because it isn’t as hard as you thought it would be. In time, you’ll learn that you don’t need or want to sharpen everything at 20 deg, but for the sake of building muscle memory it is a good place to start.
Absolutely solid item craftsmanship is top notch in general as to be expected from wazoo My only complaint is about my stone personally it's pretty bland and all white lacking in uniqueness and character there is one spot that shows some color when wet and it looks like it might be a weak point right on the top corner of the rounded end it may end up weakening with use and break off especially if it gets dropped but this is purely a fault and with the stone it's self and not with wazoo
It is sometimes too confusing on understanding the right sharpener that right to our tools. Then using the chart above you can consider on what is the right stone. Green, red, yellow and blue line they consist of the most familiar and affordable models of sharpening stone to purchase. You can see the performance of each stone in the chart. Silicon Carbide, Aluminum Oxide, and Arkansas they are typically used with the oil (Oil Stones). Waterstones (Synthetic Waterstones) are generally made of Aluminum Oxide too, then people also use oil in place of water with their Waterstone or use water on their Silicon Carbide sharpening stone in place of oil. In this group, Waterstones is the most preferred because of its easy for sharpening edges in shorter time.
Just to prove that we're not merely sharpening geeks, here's an interesting side note. The word whet pops up in some unexpected places. A small species of owl is called the saw-whet owl because the sound it makes reminded people of the sound made when sharpening a saw with a file. And the phrase "to whet your appetite" comes from the idea of your hunger growing sharper at the thought of food.
The stone is of good quality. It can be used with water or oil - but not both at the same time of course :) ... What I really want to mention is that Hayneedle has amazing customer service - no joke! My stone was shipped from the mfg. not hayneedle whse and there was a chip on one corner. They said - we can't have that! ... So they took care of the whole matter with NO cost to me and they were very friendly as if I was doing them a favor!

You must put the knife blade's position at the perfect angle which is called "against the stone." What's important is the blade should be facing opposite from you. Where you've determined where the bevel angle is located, then this is what you will position against the stone. It's a good idea to know the differences between various angles for certain blade uses. There's a certain height of the blade that it should be from the stone. You'll be able to find various charts on height of the blade online. Normally, for a pocket knife or kitchen knife, it'll be 17° - 22° angle against the stone. The "Rule of thumb" is the smaller the angle, the sharper the knife. Most makers will have it in the instruction or on their official website.
A great sharpener for all your kitchen knives the CS2 also makes a smart addition to the gear when you’re going away on a family camping trip. It will also do a bang-up job on your hunting, pocket, boning knife and more. As mentioned it does require just a bit of getting used to in order to achieve optimal results but nothing too involved. A simple, effective, no-frills sharpener.

Rest your knife on the stone at your chosen angle. An easy method for determining the angle by eye is to visualize a 45 degree angle and then take half that amount. That will give you a ballpark estimate of the angle and then you can adjust accordingly up or down. With a slicing action bring the length of the knife across the stone with a motion that starts with the heel of the knife on the stone and ends with the point of the knife. The motion should resemble a sweeping arc pattern across your stone. Be very careful to maintain the angle of the knife on the stone. Longer curved knives provide additional challenges but as long as you can maintain the angle you will be sharpening very effectively. Repeat this process on the other side of the knife and continue repeating until you have sharpened your knife though all your stone grits.


In terms of feedback, in the eyes, and in the hands of many sharpeners, the feedback on this particular brand of stones is not to their liking and often it is enough to stop them from using them. These are thinner than other stones as well so you may get the impression that you are not getting your moneys worth. They are very hard stones, there is no soft, creamy sensation as you sharpen, there is not much feedback at all in fact.
Unfortunately, the arrays of modern whetstone can be bewildering to the inexperienced sharpeners that so often times many of them end up with a crap or wrong decision on stone type for their utensils. The most difficult to determine is whether the whetstone is fake or fabricated with low quality of materials. To avoid this you can only go for the reliable brand of a whetstone.

I am just starting out sharpening with whet stones. I have found these stones to be very nice and the instructional videos that come along with the set on knifeplanet are extremely helpful to anyone starting out. The cost of the set was very reasonable and seems to be a great value. The customer service is amazing, I lost the site for the videos and sent an email to get the information and immediately there was a reply with all of the links that I needed. I appreciate their attention to their customers!!

×