Mine came plain white then started to darken after a few weeks. About 4 weeks in it settled to a more natural stone/slate grey. The leather has darkened a bit too and remains soft and comfortable. The leather remains easy to adjust and my selected sizings stays in place firmly. Overall It feels, looks and works great. The knot and darker stone/leather compliment each other well.
Serrated blades have a grind on one side of the blade. Only sharpen the grind side of the blade. Hold the sharpener at the angle that matches the original edge angle. Hold the knife with the edge away from you and the serrated side of the edge facing up. Set the tapered diamond sharpener in a serration so that you fill the indentation. Draw the sharpener towards the edge.
Vielsalm Coticule on the other hand generally occurs in much more narrow layers sandwiched between the slate layer and the Belgian Blue layer and thus, it is both less plentiful and more expensive than Belgian Blue stone. Also, Coticule is divided into different grades and sometimes displays blemishes on the surface due to its proximity to the slate layer. Furthermore, it is somewhat harder than Belgium Blue stone and, due to its brittleness, it is bonded to a substrate layer of hard slate prior to sale to prevent the stone from breaking during use.
This is great combination but you don’t need them all to get started. As your budget allows, start with one stone and although I like to start with a coarse stone, the 400 Chosera is a little coarse to start the learning process with and you would need another stone in a higher grit to finish. So if you want to start with one water stone, and that is perfectly okay, select the 1,000 grit stone, it will deliver an edge that will startle you, with practice of course. Also, just having a water stone in your possession is going to motivate you, trust me.
It helps you get the knack for a consistently correct angle BUT the idea falls apart a bit when it comes to the curve and taper part of the knife and if your knife has an excessively narrow (slicer/boner) or wide (cleaver) width. It will also mark up the sides of your knife which may bother some who are obsessed with the cosmetic appearance of their $150+ Japanese knives--I could care less.
As you see in the pictures, it is always very important to keep same angle of about 10' to 15', which is about two coins height between the blade and the whetstone. Gently push the point you want to sharpen with your first, second and third fingers. While keeping the angle and pushing the point with your fingers, stroke the blade until it reaches the other edge of the whetstone. Then pull the blade back until it reaches the edge of the whetstone. This back and forth is counted as one stroke. Repeat it for about five strokes until you can see or feel some small burrs (edge curvatures). Then move the position of your fingers to where you have not sharpened yet, and repeat this five strokes of sharpening processed from the tip to the base of the blade.
You want sharpening stones that will be useful for the majority of your edges now, and that will remain useful as you expand both your tools and your sharpening toolkit in the future. Ending up with duplicate stones or ones that are no longer useful as you gain new knives or tools is a waste of money. The goal is to start with something that will stay with you as your needs develop.
if you have regular kitchen knives it will not work- first its to deep and the blade does not stick out, not dinner knives but cooking knives. of all the knives i put in it only 1 was wide enough to stick out. the device does not hold the blades. all the blades tested fell out of it, even a hunting knife, maybe its for 1 type of knife and they are selling it as the must have tool for all.. that said sell something useless for a few bucks that most cant use, they got a few bucks that most will blow off and not worry about a refund.. DONT WASTE YOUR MONEY.
I give Sharp Pebble a top rating for two reasons. First, the company emailed a user guide for me to review and learn how to best use its product while it was being shipped to me. Wonderfully proactive. Second, the sharpening stone did a terrific job restoring the edge on my kitchen knives that had been woefully neglected. Ever rent a house and every knife in the kitchen has the edge of a butter knife? I was almost there. Now, the knives are cutting beautifully. I have only one suggestion for Sharp Pebble. While the stone includes a useful angle guide that can be attached to a blade and the guide gives clear steps on prepping the stone and how to hold the blade when sharpening, it does not illustrate the manner in which the blade needs to be moved across the stone. I had to go to Youtube to get some tips on the exact method. I have historically been very bad at putting an edge on a blade due to ignorance primarily. But with the help of the video and a good stone, I did an effective job. The base does a great job of holding the stone in place and is attractive in the kitchen.
"How do I use this daunting metal rod?" I hear you ask. Well, it's not too hard, really. The best way for a beginner is to balance the steel on a surface with the tip secured by a damp tea towel. You want to get that angle right, whether it's around 15 degrees for a Japanese knife or 20 degrees on a German or French blade. Then swipe slowly down, away from you, making sure the whole blade is honed – around five swipes on each side should do.
Actually, the company contacted me to make sure I received the stones and that I was happy with them. Excellent service. The stones are great! I'm pretty much a novice so the clear instructions that came with the stones and the eBook instructions were wonderful. The eBook had quality pictures demonstrating the use of the stones and the written instructions were clear and to the point. Within minutes of opening the box I had the stones figured out and sharpening my AF survival knife, my pocket knife and a couple of my wife's kitchen knives...which included a very expensive chef's knife. Very satisfied with this product and highly recommend it.
This is a good quality stone for a beginner looking to learn about hand sharpening knives and blades. It holds up well, especially for the price point. New sharpeners are prone to gouging and scratching stones, pushing too hard, etc, and this stone handles the abuse nicely. The no slip base is very effective at cementing the stone in place, which is a critical safety feature.
first time buying a sharping stone. i bought this because i wanted to sharpen kitchen knives. you have to practice to get good at it, use a knife you don't care about because you might mess it up. there is some conflicting instructions online on how to use, water or no water. read as much as you can about using stones and practice, practice , practice. look up videos on youtube and internet. i had fun using it, BUY IF YOU WANT TO LEARN here is some stuff i found, they all sound like professionals http://video.about.com/culinaryarts/Sharpen-Knives-With-a-Whetston.htm?rd=1 http://culinaryarts.about.com/od/knivescutlery/ht/whetstone.htm this is a video that says don't use water http://video.about.com/culinaryarts/Sharpen-Knives-With-a-Whetston.htm?rd=1 this is a youtube video that i watched that uses water. *informative http://www.youtube.com/watch?v=KFIg9Cm-nJg
The kind of tech we love: compact, reliable, durable, attractive and cheap. Purists may feel that other sharpeners will produce a more perfect result but for 99% of the human race this sharpener will be everything the doctor ordered. Your blades stay sharp for a good long time thanks to the 2-stage sharpening process and if you’re a left handed chef you’ll love the fact that it works just as effectively for you as for anyone else.
Hi Caide, our most popular stone at the moment is our Grunwerg 1000/3000 grit whetstone from speaking to our customers it’s definitely down to the pretty competitive price, but also they have said that the finish on the knife is just as good as some of our more expensive ones, the main difference is it doesn’t seem to last as long. For one that does last and leave a good finish then our Minosharp 1000 grit whetstone is also popular.
Manufacturer contacted and sent a new one for replacement. Great customer service but replacement item was nicked on the corner. It was still usable so i didn't bother to ask for another replacement. I would recommend item to be shipped in another box instead of an over-sized yellow envelop which is not adequate protection. Item sharpen my knife pretty good though..
As you apply pressure in one direction you release pressure in the opposite direction. So apply pressure with your finger tips as you push the knife from one end of the stone to the other and release as you pull it back. You could actually lift the knife off of the stone but don’t do this, keep that angle stable. Sharpening becomes this repetitive motion with the first step being the raising of the burr on both sides of the knife from heel to tip.
If you wish, further polish or even strop the edge to the desired sharpness. This makes the edge better suited for "push cutting" (cutting directly into materials, pushing straight down without sliding the blade across the object) but generally impairs slicing ability: without the "microscopic serrations" left by grinding with a stone, the blade tends to not bite into things like tomato skins.
A shinkansen is a Japanese-style pull-through sharpener named after the famous bullet train. It features two sets of ceramic wheels set at the right angle for sharpening a Japanese blade, which takes out the guesswork of the waterstone. Simply hold the handle with your left hand, then saw back and forth gently through the coarser wheel to sharpen, before switching to the finer wheel to polish.
This wedge ends up short of a "point" to a much larger degree than the picture would indicate. The metal stops short, but then there is black non-slide "tape" applied to one side, and white "slide" tape applied to the other side, which makes the wedge even thicker than it appears in the photo, which means that in practice the end of wedge is even more truncated. So I have a hard time supporting my knives accurately on this wedge while sliding them down into contact with my stones. Prior to buying this wedge I just used a wooden wedge I cut off of a 3" by 3" post using a miter saw, said wedgewhich has a much less truncated end. That wooden wedge unfortunately absorbs water from my Japanese Waterstones. But I will try spraying polyurethane on that wooden wedge to help waterproof itand try again. If that doesn't work I will try to find a 3" by 3" plastic trim board somewhere and cut a wedge off the end of that. Note that you can buy 20 degree plastic wedges, but this is the first one I have found that does 15 degrees (nominal.) Note that Amazon also has the Blue AngleGuide set of wedges, but they are very small https://www.amazon.com/Angle-Guides-Sharpening-Knife-Stone/dp/B01N4QMO7U/ref=sr_1_4?ie=UTF8&qid=1499301705&sr=8-4&keywords=sharpening+angle+guide
Selecting the right sharpening angle is the next step in sharpening. For more detailed instructions on selecting the right angle, try reading this article. Regardless of the method of sharpening, a appropriate angle should be selected. This angle doesn't need to be exact but following some general guidelines is a good idea. Most knife manufacturers recommend a roughly 20 degree angle. Depending on the use of your knife, you can move up or down from that angle. A fillet or slicing knife is never used on anything hard so an angle a few degrees less will produce a sharper edge. On the other hand, a survival knife with various uses can benefit from a more durable edge a few degrees larger.