Ceramic sharpening stones were the early replacement for natural stones. Unfortunately there are huge differences in the quality of ceramic stones so be wary. Some are extremely soft and dish out very quickly and at the other end of the spectrum some are so hard they tend to glaze over in a hurry. Ceramic stones need a good soaking for about 10 or more minutes to saturate the pores of the stone prior to use. As all knife steels are different we tend to find that ceramic stones tend to work better with some knives over others. There are no hard and fast rules but we like ceramic for Ao-ko and single edged knives. The Kaiden Ceramic stones are the fastest cutting Japanese stones in Australia and are recommended for advanced users.
Actually, the company contacted me to make sure I received the stones and that I was happy with them. Excellent service. The stones are great! I'm pretty much a novice so the clear instructions that came with the stones and the eBook instructions were wonderful. The eBook had quality pictures demonstrating the use of the stones and the written instructions were clear and to the point. Within minutes of opening the box I had the stones figured out and sharpening my AF survival knife, my pocket knife and a couple of my wife's kitchen knives...which included a very expensive chef's knife. Very satisfied with this product and highly recommend it.
I love sharing information, please never hesitate to comment if you are stuck or need some advice on water stones. Speaking of that, if you have more than one stone, start with the coarse and end with the fine stones and repeat the process on each stone. However, you only need P4 pressure on that first stone, the the Raising of the Burr Pressure. After that, keep it moderate to light.
A shinkansen is a Japanese-style pull-through sharpener named after the famous bullet train. It features two sets of ceramic wheels set at the right angle for sharpening a Japanese blade, which takes out the guesswork of the waterstone. Simply hold the handle with your left hand, then saw back and forth gently through the coarser wheel to sharpen, before switching to the finer wheel to polish.
If your knife is dull, we advise you to start with the diamond stone. After restoring the edge to original shape, de-burr the edge lightly with the ceramic stone in order to get a razor-sharp edge. Use no oil or water. Start by laying the blade flat on the stone, raise the blade spine approx. the thickness of the blade, and start moving the knife in circular motions.