When you sharpen a Buck Knife properly it will perform the way it was meant to. Never sharpen your knife on a power-driven grinding wheel not specifically designed for that purpose. You could burn the temper from your blade making the edge brittle and prone to chips or cracks. This also voids the warranty. The first step to knife sharpening is to pick a sharpener.
Sharpening stones have been around since the dawn of civilization for a very good reason: they work. Yes, they’re more labor intensive than most electric sharpeners but they also allow you an unprecedented level of control. Once you get used to something like the Fallkniven DC3 Diamond/Ceramic Whetstone Sharpener you may never take out your electric sharpener again.
Sharpening on the other hand is reupholstering the furniture or telling the hair stylist to give you a new look. Material is going to be removed from the edge of the blade. There’s no way around it. How much is removed will be a function of just how dull the knife has become or whether you’re sharpening to compensate for a chip in the edge or because the tip has broken off. If your knife is not damaged and you have it sharpened twice a year very little material will be removed each time, yet it may still be enough for you to notice just by looking carefully with the naked eye.
The stone – With a sharpening stone, the process is essentially the same as with the stick sharpener. The only difference is that you don’t hold the stone, you place it into its own holder (If it comes with one. If it doesn’t you’ll need to improvise) on a flat surface. Push the knife down the stone several times while holding it at a shallow angle and then flip it and pull it toward you several times to get the other side of the blade.
The double sided 400 and 1000-grit Water Stone Sharpening Block by Whetstone enables you to safely and easily sharpen and polish your kitchen cutlery, hunting or pocket knives, blades and razors. You can even use it for your gardening tools! This stone only requires water, no oil needed! Made with durable green silicon carbide, this honing tool will last for years to come.