If you want a quality sharpening tool, this is the product to go for. This is why we have rated it as number one due to the incredible service that it will offer you, comes with an ergonomic design that gives the user a secure and comfortable grip. It sharpens knives very fast and more efficiently. It has two stages of sharpening thus providing a chance to sharpen thick steel blades and the softer steel blades.
When a whetstone is used to cut metal, it acts like sandpaper by removing small particles of metal (aka “swarf”) with each pass of the blade over the stone. Therefore, whetstones with more coarse grits cut faster than those with finer grits and, at the same time, soft whetstones cut faster than hard whetstones because each pass of the blade over both types of whetstones not only removes fine particles of metal from the blade, it also removes fine particles from the surface of the whetstone (aka “slurry”) which continuously exposes new cutting crystals. However, if the swarf is allowed to build up on the surface of the whetstone during sharpening, it will clog the stone and drastically diminish its effectiveness. Therefore, some whetstones require water to lubricate the stone and suspend the swarf whereas, other whetstones require oil to lubricate the stone and suspend the swarf.
Lubricate the stone. Some stones specifically use oil or water, and if that's the case, ensure you're using the recommended lubricant. Most importantly, whichever lubricant you choose, do not change it after the first use. When using oils, only use those approved for sharpening stones. Food oils such as vegetable and olive oil should never be applied! Some options like diamond stones, and others, don't need any lubricant at all, so be sure to check the stone's instructions.
The blades of Sugimoto Hamono Japanese knives are tempered using the traditional mizu-yaki process which gives the metal a harder finish compared with Western knives. As a result, if you sharpen the cutting blade so that it becomes too thin, it will not be able to maintain its mechanical strength and may chip. In addition, you need to use a flat-surface whetstone to back-grind a Japanese knife. Be careful not to over-grind the blade. Blades made using the hon-kasumi method consist of two different layers of metal that are forge-welded together. Since the blade is composed of two layers, it may slightly bend over time, but this can be corrected at our Company. Single-beveled-blade knives cut with the back side of their blade. Please take particular care that this back side does not become rusty.
Now move the blade – with a little pressure – in regular strokes up and down across the sharpening stone. Always maintain the angle between the blade and the stone. You will notice a burr becomes visible after five or so strokes. Mentally divide the blade into three parts if the knife has a large blade. Always start with the tip and work back towards the bolster.

As discussed in The Sweethome's review of the Professional Knife Sharpener from Brod & Taylor, some pull-through knife sharpeners that make use of a V-notch sharpening system tend to remove too much metal from the knife. However, The Brod & Taylor machine's design overcomes this problem by precisely guiding the knife blade to create a perfect angle. This sharpener features a tungsten carbide sharpening system.
Most professional knife makers mainly use flexible belts, when putting a razor sharp edge on the blades. You can now use the same technology at home to sharpen your knives, every time they become dull. You might have other sharpening tools and methods at home. However, it is quite hard to find one that does the job better and faster than the Work Sharp WSKTS-KT Knife sharpener.
Clamp-style sharpening tools use a clamp with several holes with predefined angles. The stone is mounted on a rod and is pulled through these holes, so that the angle remains consistent. Another system is the crock stick setup, where two sticks are put into a plastic or wooden base to form a V shape. When the knife is pulled up the V, the angle is held so long as the blade is held perpendicular to the base. Several cutlery manufacturers now offer electric knife sharpeners with multiple stages with at least one grinding stage. These electric sharpeners are typically used in the kitchen but have the ability to sharpen blades such as pocket or tactical knives. The main benefit of using an electric sharpener is speed with many models that can complete the sharpening process in one to two minutes. The disadvantage is that the sharpening angle is fixed so some specialized knives, like a Japanese style Santoku, may need additional attention to sharpen to the ideal angle.
Some of the videos I watched suggested soaking the stone for 12-15 minutes prior to use. One suggested using vegetable oil on the surface versus water/soaking (I used water and presoaking it for 15-minutes). So instead of a simple 'out-of-the-box-and-use' approach, it required a bit of research before sharpening a knife. Otherwise I would have given this product a 5-star rating.
When you sharpen a Buck Knife properly it will perform the way it was meant to. Never sharpen your knife on a power-driven grinding wheel not specifically designed for that purpose. You could burn the temper from your blade making the edge brittle and prone to chips or cracks. This also voids the warranty. The first step to knife sharpening is to pick a sharpener.
Despite their name, sharpening steels don’t sharpen knives in actual sense. Their main job is honing a knife blade. However, certain styles or cuts can perform some minor sharpening. You should note that steels that sharpen knives should not be used in place of normal sharpeners. The most common types of cuts include diamond, regular, ceramic or combination. The differences in these cuts are subtle. The choice of cuts depends on what you want to achieve with the honing steel, as well as your budget
When you sharpen a Buck Knife properly it will perform the way it was meant to. Never sharpen your knife on a power-driven grinding wheel not specifically designed for that purpose. You could burn the temper from your blade making the edge brittle and prone to chips or cracks. This also voids the warranty. The first step to knife sharpening is to pick a sharpener.
You’ll know you’re reached a stopping point when you can feel the slight catch of the bevel on the edge of the blade, by carefully running your finger in the direction of the blade, or by cutting through a sheet of paper. When the knife cuts cleanly through the paper, it’s time to hone the blade. Read our guide for more information about honing vs sharpening.
We regret that due to technical challenges caused by new regulations in Europe, we can for the time being no longer accept orders from the European Union. If you reside in the UK you can continue to order from our UK websites or shop from our locations and partners. Visit West Elm at www.westelm.co.uk and Pottery Barn Kids at www.potterybarnkids.co.uk.
A major benefit of sharpening your knives on a sharpening stone is that you can thin out your knife. When thinning out a knife, you grind away extra material on the sides of the blade, making the blade thinner. Thinning of a knife is useful for knives that are often sharpened, as the cutting edge gets fatter when the blade is sharpened more often. Thinning is of great importance for the preservation of good cutting properties.
To take off the fine scratches and the burr left by coarser stones, and polish the surface, one can use stones starting around 2000 grain. Above that there is theoretically no upper limit, but at the same time stones above about #10000 provide no measurable practical improvement in the edge. It is also interesting to note that above #8000 grit, there is no Japanese measurement standard. With all the stones labelled as having a finer grit, one simply has to take the manufacturer’s word for it.