http://www.youtube.com/user/MakeSushi1 is all about how to make sushi, we pride ourselves on creating new exciting sushi roll recipes and then sharing them with the world. In our video tutorials we will teach you how to do all a basics of making sushi and create innovative sushi rolls, sashimi, nigiri sushi and possibly might create a new category of sushi , who knows. Subscribe to our YouTube channel to be notified of our weekly sushi videos: http://www.youtube.com/subscription_c...
Visually, a very sharp knife has an edge that is too small to see with the eye; it may even be hard or impossible to focus in a microscope. The shape near the edge can be highlighted by rotating the knife and watching changes in reflection. Nicks and rolled edges can also be seen, as the rolled edge provides a reflective surface, while a properly straightened edge will be invisible when viewed head-on.
The edge the Trizor XV made was the best in our tests. In contrast to the “toothy” edge that the manual Chef’sChoice ProntoPro 4643 creates, the Trizor XV polishes an edge to a razorlike finish—meaning the knife is perfectly capable of straight-up-and-down chop-cutting of items like onions and garlic, as well as traditional push- and pull-cutting. Perhaps the highest compliment we can give the Trizor XV is that, when the test was done, we resharpened the knives that we had used with the rejected competition models on the Trizor XV.
On the other hand, the surfaces of knives that have been looked after may blacken a little, but this is a different type of iron oxide than ordinary reddish rust. This black oxidation is mainly triiron tetraoxide (Fe3O4). It coats the surface of the metal and prevents ordinary rust from getting in. It will not discolor food and poses no threat to hygiene.
Chefs will do this every day, and there's no reason you shouldn't too. Before cooking, or after you've done the washing up, honing your knife will help keep it in good condition. "When you're using a honing steel, you're not actually removing any metal at all, just re-straightening that edge, to get it back in line," says Authbert. Remember that you'll still need to sharpen it every two or three months. 
Despite their name, sharpening steels don’t sharpen knives in actual sense. Their main job is honing a knife blade. However, certain styles or cuts can perform some minor sharpening. You should note that steels that sharpen knives should not be used in place of normal sharpeners. The most common types of cuts include diamond, regular, ceramic or combination. The differences in these cuts are subtle. The choice of cuts depends on what you want to achieve with the honing steel, as well as your budget
To take off the fine scratches and burrs left by coarser stones, and to polish the surface, you can use stones starting at around 2000 grit. There is theoretically no upper limit, but stones above about 10000 grit achieve practically no measurable improvement in the edge. It is also interesting to note that above 8000 grit, there is no Japanese measurement standard. For stones labelled as having a finer grit, you simply have to take the manufacturer's word for it.
There really is no point in having amazing knives if you don’t keep them sharp. Bert from TOG Knives has spent years experimenting with different sharpening methods and bits of equipment to work out the absolute best way to sharpen TOG Knives. If you follow the advice below we guarantee you will become a sharpening Ninja. Watch this space as we’ll be adding more videos in the future…
But if the edge it produces isn’t the absolute best (that honor goes to the Trizor XV), why consider the Brød & Taylor? Two reasons. First, its footprint is small enough—4½ by 3½ inches in breadth and depth, and 6½ inches high—that you can keep it on the counter, meaning you’ll be more likely to hone your knives every time you use them, a good practice that too few people are disciplined enough to follow since it generally means pulling a knife steel out of a drawer or knife block. Second, this sharpener is so elegant to look at and so simple to employ that it almost encourages you to use it. Whether you respond accordingly is a matter of personal taste and dedication, of course, but knowing our readers, I’m sure at least a few value such things highly.
On the other hand, the surfaces of knives that have been looked after may blacken a little, but this is a different type of iron oxide than ordinary reddish rust. This black oxidation is mainly triiron tetraoxide (Fe3O4). It coats the surface of the metal and prevents ordinary rust from getting in. It will not discolor food and poses no threat to hygiene.
Believe it or not the company have put a bit of effort into refining the look of their product to make it more aesthetically appealing. Whether or not they’ve succeeded we’ll let you decide. Once you get accustomed to the Classic II however the results are undeniable and the whole thing will make perfect sense. Use it on your kitchen knives, hunting knives, utility knives and more and enjoy the same high quality finish every time.
Works well. Just got it today, sharpened two pocket knives, one a 8Cr13MoV Chinese steel, the other s30v American steel The stone made short work of both steels (which were pretty sharp already). But notably was able to make the s30v hair shaving sharp easily, something I've had trouble with. Inexpensive and useful, I love this stone. It's not the Ninja sharp 8000+ grits that you can find, but for pocket knives and EDC, it's perfect and inexpensive. Get One!!!!!!!!!!!!
Besides ceramic steels, there are also grinding steel that have a layer of diamond. The hard diamond grains ensure that you can quickly regrind your knives. Compared to a ceramic steel, the result slightly less refined. A disadvantage of a diamond steel is that over time the diamond grains may break out or crumble off, which causes the steel to lose it's sharpening quality.
It takes time to sharpen a knife correctly. I spent about 30 minutes on an already fairly sharp knife. I then spent two more sessions of about 10 to 15 minutes each. I took it a bit further with a 6000 grit stone and this puts a nice polish on it. Instead of cutting through an onion, it glides or slips through it. It was truly shocking to me to use a really sharp knife. It may take a bit of time to get it right the first time, since this was my first time with a water stone, but it was well worth the effort. I have been trying to figure out the best way to get a really sharp knife.
Based in Lancaster, PA, WebstaurantStore is the largest online restaurant supply store serving food service professionals and individual customers worldwide. With thousands of available products and over 5.5 million orders shipped, we have everything your business needs to function at its best. Over the years we have expanded our selection of wholesale supplies and commercial equipment to include healthcare, educational, and hotel supplies.

Superior patented Austrian sharpening technology is the fastest Superior patented Austrian sharpening technology is the fastest way to sharpen any knife - and keep it sharp without removing metal. Ultra-hard precision ground tungsten carbide sharpeners are custom made in Austria by the same company that manufactures cutters that tunnel through solid rock mountains. Patented spring-action design auto-adjusts to ...  More + Product Details Close
If you want a quality sharpening tool, this is the product to go for. This is why we have rated it as number one due to the incredible service that it will offer you, comes with an ergonomic design that gives the user a secure and comfortable grip. It sharpens knives very fast and more efficiently. It has two stages of sharpening thus providing a chance to sharpen thick steel blades and the softer steel blades.
If you have already perused some of the knife review pages on this website, you have probably noticed that I usually select a “Best in Class”, “Best Value”, and Best something else for each Top Three Choices section. What I quickly noticed when working with these knife sharpeners was that it simply wouldn’t be possible to do such a thing. Each of these types of sharpeners is so different from the other types that I felt all deserved their very own “Best in Class” selections.
A major benefit of sharpening your knives on a sharpening stone is that you can thin out your knife. When thinning out a knife, you grind away extra material on the sides of the blade, making the blade thinner. Thinning of a knife is useful for knives that are often sharpened, as the cutting edge gets fatter when the blade is sharpened more often. Thinning is of great importance for the preservation of good cutting properties.
The first slot contains carbide blades which effortless shave your blade as you draw it through. The blades feature microscopic carbide particles which help them rough up the edges of the blade as it moves through to get an even deeper shave. The second sharpening slot contains two ceramic rods which work to hone your blade as you draw it through. They gently pull your blade into alignment and buff away the rough edge etched into it in the first stage. You can even choose to skip the first stage and use only the ceramic rods to hone your knife on a regular basis.
Last, it should be noted that dual-sided Coticule/Belgian Blue whetstones are also sometimes available which have a layer of Belgian Blue stone on one side and a layer of Coticule on the other. Thus, these whetstones provide a softer, more coarse, grit on one side and a harder, finer, grit on the other. Plus, due to the inherent toughness of the Belgian Blue stone, these dual-sided stones do not require a substrate layer.

Unlike our Top Choice for this category, most rods are actually made only to hone your blade, not to sharpen it as well. To hone something means to straighten it. The very thin cutting edge of any blade will become warped over time. It will not be visible to the naked eye, but it will be warped. Tiny folds and grooves will find their way to your blade’s edge, making it seem as if it is growing dull. Using a honing rod, you can push those folds back into place and create a straighter, stronger, sharper blade. Of course, this will only work for so long, as your blade will eventually grow dull in other ways.

Every finished product you serve to your customers goes through a number of steps from growing, harvesting, and shipping to receiving, prepping, and serving. In each one of these steps, potential food safety hazards that might sicken or injure the final consumer are present. However, with careful planning, these hazards can be prevented, reduced to safe levels, or even eliminated altogether. Keep reading to learn what a HACCP plan is and the steps needed to create your own. What does HACCP Stand For? HACCP stands for Hazard Analysis and Critical Control Points. It is a system restaurant operators put in place to help them identify and react to dangerous biological, chemical, or physical food contamination. The goal of this food management s
We tested eight other honing rods alongside our pick. Three were ceramic: The Cooks Standard 12″, the Mac black ceramic 10.5″, and the Messermeister 12″. Five were traditional steel hones: Three by Messermeister (regular, fine, and Avanta), a dual-textured fine-and-smooth “combination cut” Victorinox, and a Winware, all 12 inches in length. With one exception, we set a top price of about $40, which eliminated the professional-grade steels made by Friedrich Dick; these are standard in the butchering trade, but few home cooks need their extreme durability and specialization. During testing, we found all the traditional steel honing rods to be too rough on hard Japanese-style blades, causing them to chip, and their slick surfaces made blades of all types slip and skip. The three ceramic rods, like our top pick, offered a slightly grippy surface that made it easy to slide the knife blades smoothly along their length, which is key to good honing. But all were somewhat coarser than the Idahone, so the Idahone was less abrasive to the blades. As well, the Idahone’s generously sized steel hanging ring is superior: The Cooks Standard has a tiny, flimsy ring; the Messermeister has none, just a small hole in the handle; and the Mac’s ring is made of flimsy-feeling plastic. The Mac, which the manufacturer touts as specially suited to its knives, including our pick for chef’s knives, also costs a lot more than the Idahone, at about $55. And its shorter length made honing an 8-inch knife difficult.
The most advanced hybrid yet with acclaimed Criss-Cross The most advanced hybrid yet with acclaimed Criss-Cross sharpening technology. Electric and manual sharpening stages that provide superior edge geometry and razor sharp edges on both straight edge and serrated knives including household and kitchen knives sports knives and pocket knives. The diamond abrasive wheels sharpen simultaneously "into" and "out-of" ...  More + Product Details Close

Does a great job of keeping a nice edge on kitchen knives and my fillet knives. Also works on serrated blades. The adjustable sharpening angles makes it a very versatile sharpener. Much easier to use than the kits with multiple stones and clamp system which holds the knife at the desired angle. This restores an edge and reaches adequate sharpness with just a few strokes of the knife through the carbide blades and then the ceramic rods. I found I got a much better edge with this sharpener in a fraction of the time it requires to mess with the stones and clamp of the sharpening "systems" and at a fraction of the cost. Unless the blade has been damaged, usually all that is required is a few passes through the ceramic rods at the desired angle to re establish a nice edge.

Best purchase I every made. while my knife doesnt cut a fine layer of tomato without touching it, it became as good as it was when I purchased. I recommend users to learn how to properly sharpen the knife. It took me about 30 minutes to sharpen a single knife to what it is today. The knife gets really sharp. Also, with use, the surface gets uneven. I recommend you draw a grid in pencil and then file using the grinder stone until the grids disappear. This ensures the surface remains flat during all use.


Turning to the sharpeners themselves, we looked at aspects such as ergonomics, speed and simplicity of use, noise level and overall power (for the electric sharpeners), and build quality. We also weighed cost against performance to get a subjective measure of value. After two hours, we had clear picks for the winner and the upgrade choice, as well as an option for people who want high style along with high performance.

Diamond whetstones, like the DMT Diamond Whetstone, are made out of industrial type diamonds which create a long-lasting hard, coarse and flat surface. A diamond whetstone is an excellent choice for when you are outdoors as you can use it dry or with a lubricant. It can take some time getting used to and the larger sized stone may not be ideal for working with small knives or cutting tools.
It is designed to help sharpen straight bladed knives that are made of steel. It cannot be used on ceramic and serrated edges. The two sharpening modes guarantee the user gets the best service from it. It has been designed with the users’ safety in mind. This is due to the large grip handle and the non-slip feet. It has an attractive design that makes it a great addition to any kitchen.
Based in Lancaster, PA, WebstaurantStore is the largest online restaurant supply store serving food service professionals and individual customers worldwide. With thousands of available products and over 5.5 million orders shipped, we have everything your business needs to function at its best. Over the years we have expanded our selection of wholesale supplies and commercial equipment to include healthcare, educational, and hotel supplies.
×