If style and interior décor are important to you and you intend to leave your sharpener on the countertop, you will be happy to hear that this Chef’s Choice is available in six stunning colors. The colors include black, white, red, chrome, brushed metal, and platinum. Though they may not be the best matches for many country or vintage-style homes, these sharpeners will look fantastic on the countertop in an urban, industrial, or modern-style home.
If I thought that the 12-inch option of the Messermeister rod was a little longer than necessary you must be wondering why I would include this Winware rod which is only available in a 12-inch option and a 14-inch option. I stand by my opinions and will confidently say here that I would not select either of these rods on the sole basis of their extreme lengths. That being said, many other consumers have selected these sharpeners, despite (or maybe because of) their length and have reported being very satisfied with the results they have achieved.
I purchased this set together with the 400/1000 grit stone assuming that some of my knives were quite dull and would need work on a coarse grit stone. Premium Whetstone Sharpening Stone 2 Side Grit 400/1000 | Knife Sharpener Waterstone with NonSlip Rubber Base & Flattening Stone. This is my first wetstone. First off I tried to sharpen my Chicago Cutlery boning knife. This knife is nearly thirty years old, has been abused in may ways and was quite dull. It was very difficult for me to get a burr on this blade, which I attribute to poor technique. Next I moved on to my Henckels Professional S paring and chef's knives. The paring knife was moderately sharp and was modestly improved after working over all three grits of stone. It would cut paper but again it was difficult to develop a burr with this blade. Undaunted I switched to the chef's knife. This knife is twenty years old and has never been professionally re-sharpened. I have sharpened it twice with a Lanksey sharpening system which marred the finish but did put a good edge on the blade. Lansky Standard Coarse Sharpening System with Fine Hones. The chef's knife was moderately dull and had several pits visible on the cutting surface. I modified my technique for passing the knife over the stone and worked the chef's knife over the 400 grit stone aggressively and eventually I was able to get a burr to form from the tip of the knife all the way to the handle. From there it was a simple process of reforming the burr on the 1000 grit stone and then finishing on the 6000. After sharpening, the chef's knife easily and cleanly slices a tomato with very light pressure and is in my opinion very sharp. Not sushi knife sharp but more than enough for the chopping and slicing I expect of it. I'm looking forward to going back and working both the boning knife and the paring knife over again. Don't expect a good result from this product the first time you use it. Watch videos on using a wetstone, expect to spend at least twenty minutes per knife at first, and practice forming a burr. If you can form a burr, you will be able to successfully sharpen your knife.
Despite being called a “4-Stage” sharpener, this is actually two 2-stage sharpeners in one. You can easily choose between a two-stage sharpener built for a 28 degree angle (14 degrees per side) and one built for a 20 degree angle (10 degrees per side). A sliding plastic guard covers whichever type you are not using to reduce confusion and stop you from accidentally placing your knife into the wrong slot. As someone who likes some knives to be sharper than others, I find this to be quite an impressive feature.
Manual sharpeners are, in my opinion, the best way to sharpen your knives. They are my personal favorite, because they allow you to sharpen your blades with precision. Unlike electric sharpeners which can take off layers of steel so quickly you barely see it happen, you maintain control over the sharpening process with a manual sharpener. You can put one pass through, then check your edge. You can do another pass or two, then check it again.
I know this makes it sound rather easy to decide between a manual vs electric knife sharpener, and you’ve probably been struggling with the choice for a while. The thing to remember is that as long as you’ve done your homework and chosen the proper mechanics and abrasives, you’ll know what one you should pick. You don’t have to spend a fortune, but if you decide on a cheap knife sharpener, you can expect to get what you pay for. Whether you go with a manual or electric knife sharpener, be sure the abrasive used is high quality and that the guides are ideal for your type of knife. That’s all you really need to know to get sharp knives.
To sharpen a blade in the Brød & Taylor, you situate the blade tip-down between the sharpener’s spring-loaded arms, press down slightly, and draw the length of the blade through the carbides. Within three or four passes, they remove metal shavings (pictured below) and produce a new, keen edge. You have to hold the blade steady throughout, but the tension that the spring-loaded arms put on the blade makes this task much easier. To hone, you tilt the tip upward and make six to eight passes. Then, to produce a final polished edge, you spread the arms to their widest point with your other hand and draw the blade through horizontally, allowing its weight to provide the only downward pressure. The whole process is simple to master and quick to accomplish—less than a minute.
This Messermeister rod is available in a 10-inch option and a 12-inch option, allowing you to select whichever suits you best. A general rule I like to follow in selecting a sharpening rod is to select one which is about the same size as my longest blade. As someone who’s longest blade is only 8 inches, I would select the 10-inch option. Most people will find themselves leaning toward that option, since bigger isn’t necessarily better. The rod needs only to be sufficiently long to allow you to sweep your knife down it without running out of rod before you reach the end of your knife. Anything too large will be difficult to control. Therefore, unless you are trying to sharpen a sword, I would advise against the longer option.
While it may still feel like there is a lot to choose from, you don’t need a lot of of stones, you just a several good varieties to choose from. To summarize I will indicate below what my favourite stones are in each grit. Yes you can mix up the brands when sharpening but my recommendation is to buy a combination of 2-3 stones of the same brand and go from there.
For this type of hand held manual sharpener the 463 does an extraordinary job thanks mostly to the diamond abrasive wheels. You get an edge that’s both razor sharp and burr-free, as if you spent an hour working the edge on an oil stone. If people make a mistake with the 463 it’s that they assume more pressure is needed than actually is. Keep in mind though that it really shines on serrated and straight edged, double bevel Asian-style knives.
Diamond whetstones, like the DMT Diamond Whetstone, are made out of industrial type diamonds which create a long-lasting hard, coarse and flat surface. A diamond whetstone is an excellent choice for when you are outdoors as you can use it dry or with a lubricant. It can take some time getting used to and the larger sized stone may not be ideal for working with small knives or cutting tools.
I've always wanted to sharpen knives on water stones, and this set gave me the motivation to finally give it a shot. The price is amazing for the quality and content of the set. It comes with all the grits you need to sharpen anything... I usually start on the 400 grit if the knife is very dull, or directly on the 1000 grit if it's not too dull. The 3000 and 8000 grit stones are softer and ideal after the coarser stones. The online learning section is truly amazing, much better than I expected. A convenient place with instructional videos and many articles about knife sharpening. Only downside is that the knives are now so sharp I need to be very careful using them... but that's a good thing! I feel like I fell in love with knife sharpening again.
If you are a fan of matching your small appliances and gadgetry to your interior décor you will be quite pleased to hear that this sharpener is available in three different colors – black, lime green, and red. That being said, I don’t think it should be all that important, considering that this sharpener is so small it can easily be tossed in a drawer or backpack for safe keeping.
I recommend keeping two stones in your kit. One with a medium grit (around 800 or so) to perform major sharpening jobs, and one with a fine grit (at least 2,000) to tune the edge to a razor-sharp finish. For real pros, a stone with an ultra-fine grit (8,000 and above) will leave a mirror-like finish on your blade, but most cooks won't notice the difference in terms of cutting ability.
Begin by sharpening the knife from the front side. Sharpening is completed when the knife has an even burr. Only use a flat-surfaced stone to finish the back surface of the blade. Sharpen the blade from the edge to the spine. Do not sharpen at too great an angle between the blade and the stone. The stone used to finish the cutting edge of the blade should contact the edge evenly.
We offer a series of oilstone packages that combine India and Arkansas stones and are very reasonably priced. At 8" long by 2" wide these stones are not as wide as some other types, but still wide enough for many edges and are plenty wide for knife sharpeners. Available in four price levels, these kits are a great opportunity for the beginning sharpener on a budget.
Note that, unlike steel honing rods, ceramic hones need occasional cleaning, as particles of knife metal build up on their surface (they form a gray layer). Idahone sells a “Superaser,” but on knife forums, many owners of ceramic hones recommend generic melamine foam sponges as a more economical alternative (the Mr. Clean Magic Eraser is the famous name-brand version). Messermeister, the maker of one of the other ceramic hones in our test, recommends a mild abrasive cleanser, like Bon Ami or Bar Keepers Friend, advice that is also echoed by many knife enthusiasts.
You will also need at least one finer stone. Once the shape of an edge is established, successively finer grits are used to refine the edge improving the quality of the cut it delivers. A dull edge will not cut well and should be shaped with a coarse stone. An edge sharpened on a coarse stone will cut better than a dull one, but still won’t be ideal and should be improved with a finer stone. As you progress through finer stones, the cutting edge will continue to improve. How many and how fine these stones need to be varies depending on how fine an edge you require.
Similar to electric sharpeners, manual sharpeners simplify the entire sharpening process. However, they tend to have fewer slots for sharpening. One benefit of manual or handheld sharpeners is their portability. Their manual operation, combined with their small size, makes it convenient for cooking professionals who are always on the move. Depending on how the manual sharpener is designed, you can either draw your knife between the slots or the sharpener is moved along the blade of the knife. Whichever type you choose, manual sharpeners easily sharpen a blunt or dull knife, to the desired level of sharpness.
However, due to limited natural deposits and extensive quarrying over the centuries, true, high quality, Japanese water stones are now few and far between and are very expensive. Thus, various companies are now producing synthetic Japanese Water Stones which generally have a more consistent composition and grit size than natural stones as well as often begin somewhat harder and thus, lasting a bit longer; not to mention being cheaper to purchase.
If you’re sharpening high quality knives, you probably don’t want to use a cheapo sharpening stone. But if you’re just getting started with sharpening your pocket knife, there’s no need to get too fancy right off the bat. You can find a sharpening stone at most hardware stores for about $10. This one is very similar to the one I use. Nothing fancy. Most basic sharpening stones come with two sides: a rough grit and a fine grit. The finer the grit, the finer or sharper you can get your blade. You usually start off sharpening on the rough grit and then finish sharpening it on the finer grit.
It’s up to you if you want to use a sharpening steel or a handheld knife sharpener for honing your knives. The handheld is really easy to use. For fast, effective sharpening, simply place the blade in the slot and gently pull it through a few times. If you want to use a sharpening steel, just make sure it has a higher hardness factor than the knife to be sharpened. One more important thing: don’t ever hone serrated knives. They must be sharpened by a professional or replaced. Period.
The Sharpening and Specialty lines of waterstones from Naniwa are available in several packages of three to five stones. The Specialty line is the same as the Sharpening line, but half the thickness and therefore less expensive. Both the Sharpening and the Specialty stones are 8 1/4" long by 2 3/4" wide, amply sized for most knives and tools. These are a higher grade stone that do not require soaking before use. While you would need a flattening stone in addition, these kits are a good way to enter into premium grade waterstones.
Soaked stone for about 20 minutes, then when attempting to sharpen the blade, A red slurry ends up all over the blade. Even a couple sprays from a water bottle and a wipe with a microfiber appears to take material off the surface. Since it is not coming off evenly across the stone surface, it is now uneven and the stone appears to be unusable at this point.
A hybrid manual-electric sharpener, the Chef’sChoice Hybrid 210 uses a motor and abrasive wheels to grind the new edge and employs a manual stage to hone it. This sharpener is eminently affordable. However, our top pick, the ProntoPro 4643 multi-blade-angle manual model (as well as its $30 to $40 single-blade-angle kin) produces a better edge and doesn’t make us worry about breakdowns the way the Hybrid 210’s lightweight motor does.
I have this one and the axe/machete version as well. These are great sharpeners that make very short work of getting blades sharp. They take off quite a lot of material and are quite different than most other stone sharpeners I have used in the past, so I try to be conservative with my pressure as you see the chips fall when you pull the knife through. But, they absolutely work, and work very well. If you have a high use knife, this is a great way to keep it sharp and in service all the time. I use my large bushcraft knife a lot more now that I have this since I can sharpen it much faster and easier. I would not use this sharpener on precision instruments just because I prefer more control and try to preserve material on those types on knives. But, bottom line, I get more work done and much faster now that I have this.
With V-notch systems, some people may experience difficulty applying just the right amount of pressure to ensure an even sharpening on the blade. The Brod & Taylor design includes a spring-loaded sharpening configuration that overcomes this problem for most people, according to the Kitchen Boy review. One Amazon customer reviewer experienced this problem. However, once you have the hang of this machine, it works great.
Based in Lancaster, PA, WebstaurantStore is the largest online restaurant supply store serving food service professionals and individual customers worldwide. With thousands of available products and over 5.5 million orders shipped, we have everything your business needs to function at its best. Over the years we have expanded our selection of wholesale supplies and commercial equipment to include healthcare, educational, and hotel supplies.