The newly designed dual-sided combination whetstone from Fallkniven features a super fine white ceramic stone (0, 1 micron) with a grit of 1400 to 2000 and the dark grey ceramic stone is made of synthetic sapphires (1 micron) and has a grit of 800-1000. There is no need to add any oil or water, just lay the blade on the stone, raise the blade's spine and deburr your blade on the grey side until it has a razor-sharp edge and then use the smooth white side to get a nice polished edge.

If your knife isn’t restored by steeling, you may need to hit the fine ceramic stone a few times. You should rarely need the coarse notch after your knife is properly sharpened. That is, unless you’ve wrecked the edge by cutting on a too-hard surface or trying to hog your way through a bone. If that’s the case, you’ll have to hit the coarse and then the fine.


This set of two Norton combination waterstones provides four grits and also includes a flattening stone as an added value. The 220, 1000, 4000 and 8000 grit sides will handle everything from aggressive shaping to final polishing. They are 8" long by 3" wide, big enough to handle most knives and tools easily. Our most popular waterstone kit, this has everything you need to both sharpen with waterstones and maintain the stones themselves. A great starter set.

×