This pocket-sized tool sharpens knives using carbide sharpening blades, then gives the knife a smooth finish using ceramic blades. A diamond rod is used for honing knives or for sharpening serrated knives. This is a great tool to keep in the toolkit, the tackle box, or to carry along when camping. Since it’s small, your hands will be close to your sharp knife blades as you work, so you might want to save it for occasional use rather than for sharpening all of your kitchen knives on a regular basis.
After testing nine honing rods, both steel and ceramic, we think the Idahone 12″ fine ceramic rod is best for most kitchens. We were looking for a tool that kept knives of all styles sharp, from 4-inch paring knives to 12-inch chef’s knives. We wanted one that worked equally well on German and Japanese blades, which are made of softer and harder steels, respectively. We also wanted to pay less than $40. The Idahone met all our requirements. Its surface was noticeably smoother than that of the other three ceramic models we tried, yet rapidly restored the edges of all the knives we tested. It also removed less material from the blades, which will help to prolong their working lives. And compared with the five steel honing rods we tested, the Idahone was gentler on the blades.
There are many methods to sharpen your knives. For example, you can use a sharppening stone, or a sharpening rod, sharpening system or an electrical sharpening machine. You can also ask someone else to do the job. The best sharpening method for you, depends on the kind of knives you want to sharpen, the type of steel of the blade, your experience with sharpening and your own preferences.
The first slot contains carbide blades which effortless shave your blade as you draw it through. The blades feature microscopic carbide particles which help them rough up the edges of the blade as it moves through to get an even deeper shave. The second sharpening slot contains two ceramic rods which work to hone your blade as you draw it through. They gently pull your blade into alignment and buff away the rough edge etched into it in the first stage. You can even choose to skip the first stage and use only the ceramic rods to hone your knife on a regular basis.
Our guide attempts to give you the easiest methods for keeping your arsenal of knives sharp and ready. One final item to mention: Serrated knife blades won't work with all types of knife sharpeners. If you're using a pull-through or electric knife sharpener, it needs to have a serrated setting or the blade will lose the serration during sharpening.
A great sharpener for all your kitchen knives the CS2 also makes a smart addition to the gear when you’re going away on a family camping trip. It will also do a bang-up job on your hunting, pocket, boning knife and more. As mentioned it does require just a bit of getting used to in order to achieve optimal results but nothing too involved. A simple, effective, no-frills sharpener.
However, because the Belgian Blue stone generally occurs in relatively wide columns with much thinner layers of Vielsalm Coticule on either side adjacent to the slate, the Belgian Blue stone is more plentiful that Coticule and thus, it’s somewhat less expensive. But, it’s also somewhat softer than Coticule and is not divided into different grades as Coticule is. Furthermore, because it is a softer stone than Coticule, it is sold without a substrate layer.
Guided sharpening systems use a holder where you secure your knife, one or several sharpening sticks or conductors. Through the use of the holder, it is easy to select the right angle for sharpening. When using a guided sharpening system, there are two ways to sharpen your knife: a. Sharpening sticks are placed in the holder, after which you pull the knife along the different sharpening sticks, in order to sharpen it. b. The knife is secured in the holder, after which you pull the sharpening sticks along the blade. There are various systems for sale with a sharpening stone grinding the knife under a adjustable angle. The advantage is that you have a nice straight cutting edge. Disadvantage of this method is that it takes more time than grinding on a regular sharpening stone. Moreover, by sharpening with a fixed angle, you are much less flexible. So if you don't want to sharpen the knife in ze pre-fixed angle, you will still have to do it manually. The guided sharpening systems are highly recommendable for sharpening expensive pocket knives, because they provide a very nice cutting edge. By pasting the blade with adhesive tape, you can prevent any scratches caused by the clamping system. For kitchen knives, it is advisable to use a sharpening stone or electric grinder.
A hybrid manual-electric sharpener, the Chef’sChoice Hybrid 210 uses a motor and abrasive wheels to grind the new edge and employs a manual stage to hone it. This sharpener is eminently affordable. However, our top pick, the ProntoPro 4643 multi-blade-angle manual model (as well as its $30 to $40 single-blade-angle kin) produces a better edge and doesn’t make us worry about breakdowns the way the Hybrid 210’s lightweight motor does.

You will be given access to our useful online learning material: a set of videos and articles to help you improve your sharpening technique. These resources were made by professional knife sharpeners, specifically for beginners and intermediate sharpeners. The articles and videos will guide you and teach you knife sharpening from scratch, also covering more advanced techniques. You can also get in touch with us anytime if you have any questions concerning sharpening specific types knives.
Once the burr is removed, it's time to test the sharpness with paper. Hold a piece of newspaper at about 45°, with a bit of tension, and slash lightly with each point of the blade. If it cuts through easily, your knife's sharp. Warner speedily lacerated his newspaper, but I of course struggled. There is an element of technique involved, he reassured me. 
I wanted an upgrade to my Smith's pocket sharpener, and this is perfect for all of my fixed blade and folding knives. It sits firmly on flat surfaces. Drawing the blades through the stones is effortless. This is a great purchase as an alternative to using flat stones, which I've never been good at. It doesn't take long to set a nice edge on my knives.

Let's begin by sharpening the knife from the front side. Western knives are not evenly double-beveled. The ratio for sharpening them is 80% on the front side and 20% on the back side of the blade. (The angle of the blade to the sharpening stone surface is about 10 degrees.) All knives are sharpened from the cutting edge to the spine of the blade. You hold the handle with your right hand, push down on the side of the blade with the fingers of your left hand, and sharpen by moving the blade toward the center of the stone.


"Sharpening is like a hangover cure," says Laurie Timpson, founder of Savernake Knives in Wiltshire. "If there was a cure and you knew about it, I'd stay at your house, crash on your sofa and have whatever it was when I woke up. Everyone would have it and there'd be no discussion. Everybody says they've created a perfect sharpening technique, and they haven't." 

The manual Brød & Taylor Professional Knife Sharpener was the most distinctive tool in our test. Unlike the rest of the models we tried, it employs the V-notch system in which you “carve” a new edge on sharpened tungsten-carbide stones. As noted above, typically you can find such systems in cheap one-step sharpeners that have a deserved reputation for removing too much metal from blades and producing wavy edges that cut poorly and dull quickly. And going into our test, we were skeptical. However, thanks to clever and precise engineering, the Brød & Taylor model produced an excellent edge. It allowed us to hone and polish that edge simply by changing the angle of the blade, producing a sharp, even, stable, and durable edge that nearly matched that from our upgrade pick, the Chef’sChoice Trizor XV.

4. Start sharpening the first side of the blade. With your blade set at the prefect angle, you’re ready to start sharpening. Imagine you’re carving off a slim piece of the stone’s surface. Personally, I bring the blade into the stone. Other people stroke the blade away from the stone. Both ways work, so just use whatever technique you prefer. If the knife blade is curved or if it’s longer than the stone, you’ll need to sweep the blade sideways as you work, so the entire edge is sharpened evenly. Apply moderate pressure as you sharpen. No need to bear down hard on the blade. After you make one stroke, start back at the beginning and repeat. Do this about 6-12 times.
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer.
Functionality – If you have experience with the stick or sharpening stone you likely don’t want or need anything else. If, however, you are in search of an electric-powered sharpener you’ll want to consider how many “stages” you need in your sharpener. In a typical 3-stage sharpener the first stage is the coarsest and does most of the heavy lifting required to turn the edge from dull to sharp. The second stage will have finer grain sharpening wheels. These are used to hone the edge, that is, to smooth out the burrs left by the coarse first stage. A third stage will refine the edge even further and remove any debris left over from the sharpening process.

I had wanted a pair of sharpening stones for a while, so was enthused to get this last week. I watched a bunch of YouTube videos on how to use them and a deburring strop I also bought and wow, my kitchen and pocket knives are now wicked sharp. Pro tip: if you post anything about it on social media, family and friends will almost surely volunteer their knives for more practice...


Cost – While you can get a perfectly serviceable sharpening stick or stone sharpener for short money and some very high-quality tabletop manual 2 and 3-stage sharpeners for less than $50, high-quality mechanical systems will often run you $200 or even more. While that’s not so much money it’s likely to impact the quality of your life it is a lot to pay to keep a decent edge on your knives. While how much you ultimately pay for a sharpener is entirely up to you, you may want to consider your commitment to cooking and how often you are actually liable to use the device. If this is your first sharpener you might also want to consider learning how to sharpen a blade using a classic stick or stone sharpener first, before deciding if moving up to a mechanical sharpener is the right thing for you.


This 9-inch honing steel is the perfect length for most people. Just slightly larger than the typical chef’s knife and slicing knife (usually the longest knives in a set), this rod will not be too much for most people to handle. Unlike the 12 and 14-inch rods featured further up this list, this 9-inch rod should be very easy to confidently and safely control.
Best purchase I every made. while my knife doesnt cut a fine layer of tomato without touching it, it became as good as it was when I purchased. I recommend users to learn how to properly sharpen the knife. It took me about 30 minutes to sharpen a single knife to what it is today. The knife gets really sharp. Also, with use, the surface gets uneven. I recommend you draw a grid in pencil and then file using the grinder stone until the grids disappear. This ensures the surface remains flat during all use.

There are consumers that used the Chosera stones for years with amazing results. Some even bought the different lines of Chosera stones since it can be hard to choose a favorite (just like the Naniwa Chosera 800 Grit Stone which is also highly recommended) and all serves different sharpening purposes. But many agreed that the Chosera 1,000-Grit is an excellent stone to create a new bevel on straight edge razors.

If you have the time to commit to a block sharpener, this two-sided King stone should manage to meet your needs. Of those consumers who actually knew how to use this type of sharpener and those who took the time to learn how to use it, the overall consensus was that it is worth its fairly average price. Consumers were most impressed with how well this stone worked when it was wet, but noted that it is also rather useful when dry.
You always have the choice to experience our sites without personalized advertising based on your web browsing activity by visiting the DAA’s Consumer Choice page, the NAI's website, and/or the EU online choices page, from each of your browsers or devices. To avoid personalized advertising based on your mobile app activity, you can install the DAA’s AppChoices app here. You can find much more information about your privacy choices in our privacy policy.

Even if you choose not to have your activity tracked by third parties for advertising services, you will still see non-personalized ads on our site.

The Adjustable Angle Pull-Thru Knife Sharpener will sharpen all your knives (hunting, kitchen, and pocket) at the same angle as the original factory grind. Stop messing with the complex, cumbersome, and time-consuming Precision Sharpening Kits and get a simple, easy to use knife sharpener that offers more angles and sharpens both sides of the knife blade at the same time.
A single stone of 120 grit and a combination stone of 1000 and 3000 grits come along with a stone holder all for a price of less than many other individual stones. The stones are 6 7/8" long and 2 1/8" wide. A flattening stone of some kind would be needed, but with economical options available in those, the overall price of this kit would still be low. This entry level set is a good budget minded option.

The word “Novaculite” is derived from the Latin word “novacula”, which means “razor stone” and is essentially a metamorphic, recrystallized, variety of Chert composed mostly of microcrystalline quartz that is found in the found in the Ouachita Mountains of Arkansas and Oklahoma and in the Marathon Uplift of  Deposited in the Devonian Period and the early Mississippian Subperiod some 410 to 325 million years ago and subjected to uplift and folding during the Ouachita orogeny of the Atokan Epoch (early Pennsylvanian Subperiod), Novaculite is a very tough stone that is resistant to erosion and thus, the various layers of Novaculite stand out as ridges in the Ouachita Mountains. Thus, due to both its availability and its composition, it has been mined since ancient times for use as arrowheads and spear heads as well as in more modern times for use as sharpening stones.
Soaked stone for about 20 minutes, then when attempting to sharpen the blade, A red slurry ends up all over the blade. Even a couple sprays from a water bottle and a wipe with a microfiber appears to take material off the surface. Since it is not coming off evenly across the stone surface, it is now uneven and the stone appears to be unusable at this point.
Mospro knife sharpener has great qualities, and it has received positive reviews from people who have tried it. It has a comfortable handle and a non-slip cushion on the bottom that keeps it secured when placed on a surface. The knife sharpener is very easy to use. It comes in a material that makes it very durable hence providing excellent service to the user. The two stage coarse and fine sharpening system does not disappoint the user.
×