Chefs will do this every day, and there's no reason you shouldn't too. Before cooking, or after you've done the washing up, honing your knife will help keep it in good condition. "When you're using a honing steel, you're not actually removing any metal at all, just re-straightening that edge, to get it back in line," says Authbert. Remember that you'll still need to sharpen it every two or three months.
The sharpener has come a long way in the past couple of thousand years and yet it hasn’t. That is, while there have been incredible advances in the development of mechanical knife sharpeners the classic and very ancient sharpening stone is still with us and very much in use as you read this. The best knife sharpener for you will be one that meets the needs of your cuisine and your temperament but which, first and foremost, reliably produces the sharp knives (look after your knife!) you need with the least hassle.
I know this makes it sound rather easy to decide between a manual vs electric knife sharpener, and you’ve probably been struggling with the choice for a while. The thing to remember is that as long as you’ve done your homework and chosen the proper mechanics and abrasives, you’ll know what one you should pick. You don’t have to spend a fortune, but if you decide on a cheap knife sharpener, you can expect to get what you pay for. Whether you go with a manual or electric knife sharpener, be sure the abrasive used is high quality and that the guides are ideal for your type of knife. That’s all you really need to know to get sharp knives.
Diamond plates are available in various plate sizes (from credit card to bench plate size) and grades of grit. A coarser grit is used to remove larger amounts of metal more rapidly, such as when forming an edge or restoring a damaged edge. A finer grit is used to remove the scratches of larger grits and to refine an edge. There are two-sided plates with each side coated with a different grit.
This rod features no abrasions. Instead, it features long grooves. This tells me that it has been made for honing, not sharpening. That is okay, though, because that is what most people look to a rod for – its honing ability. Unlike the Wusthof, which was awarded “Best Rod”, this Winware is not magnetic. That is also okay, though, since this rod is made strictly for honing and will not need to grip onto any metal shards, as no metal shards will be removed from the blade during the honing process.
Unlike our Top Choice for this category, most rods are actually made only to hone your blade, not to sharpen it as well. To hone something means to straighten it. The very thin cutting edge of any blade will become warped over time. It will not be visible to the naked eye, but it will be warped. Tiny folds and grooves will find their way to your blade’s edge, making it seem as if it is growing dull. Using a honing rod, you can push those folds back into place and create a straighter, stronger, sharper blade. Of course, this will only work for so long, as your blade will eventually grow dull in other ways.
TO USE: Soak stone in water for no more than 5-10 minutes. Place stone on a damp cloth with the courser 400 grit side (dark green) facing up. Hold the knife so that it’s flat and perpendicular to the block, with the blade facing left. Holding the knife at a 20-degree angle, slowly sweep the edge of the blade from left to right down the length of the stone and continue until sharp. If stone starts to feel too dry, add more water. Be patient and take your time. Flip knife over and repeat on the other side (now moving from right to left). Be sure to sharpen both sides evenly. To polish the blade further, flip stone over to the fine 1000 grit side (light green) and repeat the process. When blade is honed to desired sharpness, wash and dry your knife. To clean your stone, simply rinse with water, wipe away any remaining metal residue with a rag, rinse again, then dry.