1. Start off with the rough grit. If you have a particularly dull blade, start off with the rough grit side of your sharpening stone. How do you tell which side is the rough grit? Sometimes you can tell by sight. If you can’t do that, do a thumbnail test. Scratch the surface with your thumbnail and whichever side feels rougher, that’s the side you want to start off with. Also, rough grits tend to be more porous than finer grits. So if you put water on one side and the stone really drinks it up, chances are it’s the rough grit.
The kind of tech we love: compact, reliable, durable, attractive and cheap. Purists may feel that other sharpeners will produce a more perfect result but for 99% of the human race this sharpener will be everything the doctor ordered. Your blades stay sharp for a good long time thanks to the 2-stage sharpening process and if you’re a left handed chef you’ll love the fact that it works just as effectively for you as for anyone else.
If you’re looking for a simple knife sharpener that’s easy to use and can effectively sharpen knives without costing you an arm and a leg. Then consider getting the Wrenwane 2-stage knife sharpener which only cost around $12. It features 2 stage sharpening modes. Stage 1 is the Tungsten Carbide coarse blade to sharpen overly blunt knife. Stage 2 is the Ceramic fine rods for touching up after running to the coarse blade, or for fairly sharp knives that just need an extra little touch up.
Every finished product you serve to your customers goes through a number of steps from growing, harvesting, and shipping to receiving, prepping, and serving. In each one of these steps, potential food safety hazards that might sicken or injure the final consumer are present. However, with careful planning, these hazards can be prevented, reduced to safe levels, or even eliminated altogether. Keep reading to learn what a HACCP plan is and the steps needed to create your own. What does HACCP Stand For? HACCP stands for Hazard Analysis and Critical Control Points. It is a system restaurant operators put in place to help them identify and react to dangerous biological, chemical, or physical food contamination. The goal of this food management s 

You shouldn’t use this stone often, as it will wear your knife down. The #2000 and #3000 grit stones can be used more often if you are the sort of person who likes to sharpen a bit more regularly as they are less coarse, but again, they are designed for sharpening and not maintaining your edge.Once you get into a routine, you will get to know how often you need to use your medium stone.

Three other positives to the Brød & Taylor: First, you can use it to sharpen serrated blades by tilting the blade in the horizontal plane so that only one carbide (generally the one on the right, given how the edges of most serrated blades are ground) contacts the metal. Second, it’s ambidextrous, because lefties simply have to turn it around to engage their dominant hand. And third, unique among our test models, it can sharpen blades all the way to the heel, because the left- and right-hand carbides meet at a single point. (The ⅜ inch of the blade that our Chef’sChoice picks leave unsharpened at the heel is largely ignorable, but praise where praise is due.)

The Chef’s Choice 476 2-Stage Sharpener transforms your weary kitchen, hunting and pocket knives into razor sharp cutting instruments with dependable ease. The sharpener is simple in concept, solid in its fabrication and reliable in the way it goes about its business. The design is also free of right-hand bias which is good news for the lefty chefs out there.
Medium Grit Stones: The number range here is from 1000 to 3000, with the latter being the basic, go-to sharpening stone. If your knives have lost their edge and need a good sharpen, then this is the grit you should start with. Don’t use it too often or the knife wears down rapidly. If you like to sharpen regularly, then the 2000 and 3000 grit are the ideal choice as they are less coarse, but please remember they are designed for sharpening and not maintaining the edge.
Dan’s Whetstone Co., Inc. currently offers over 350 products and is the only Arkansas Novaculite stone producer that quarries, manufactures, and distributes Natural Arkansas Whetstone products worldwide. Dan’s owns over 500 acres of mineral properties and controls several quarries that supply the various grades of Novaculite used in manufacturing. According to the reserve projections these quarries will supply the next four generations or more, which would lead one to believe that Dan’s Whetstone will be around for many years to come.

A shinkansen is a Japanese-style pull-through sharpener named after the famous bullet train. It features two sets of ceramic wheels set at the right angle for sharpening a Japanese blade, which takes out the guesswork of the waterstone. Simply hold the handle with your left hand, then saw back and forth gently through the coarser wheel to sharpen, before switching to the finer wheel to polish.

There are many methods to sharpen your knives. For example, you can use a sharppening stone, or a sharpening rod, sharpening system or an electrical sharpening machine. You can also ask someone else to do the job. The best sharpening method for you, depends on the kind of knives you want to sharpen, the type of steel of the blade, your experience with sharpening and your own preferences.
High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge.  They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.
Ability to sharpen knives by hand: There’s something to be said about running the tool over the blade with your own hands and feeling the abrasive wheels reshape and refresh the knife. Some believe that an electric knife sharpener is too aggressive with its sharpening, and can damage or ruin the blade, thus having control of the speed and pressure is important.
Using the strength of industrial high precision superior mono-crystalline diamonds, Diamond Machining Technology (DMT) have created a durable longer-lasting flat sharpening surface that will efficiently sharpen, hone, deburr and polish almost any type of knife or cutting tool. The DMT set contains 3 one-sided whetstones that have extra-fine, fine, and coarse grits which means you have a complete sharpening system at your fingertips.
×