http://www.youtube.com/user/MakeSushi1 is all about how to make sushi, we pride ourselves on creating new exciting sushi roll recipes and then sharing them with the world. In our video tutorials we will teach you how to do all a basics of making sushi and create innovative sushi rolls, sashimi, nigiri sushi and possibly might create a new category of sushi , who knows. Subscribe to our YouTube channel to be notified of our weekly sushi videos: http://www.youtube.com/subscription_c...
Whetstone has two different sides of grain for sharpening and polishing knife edges. These softer Japanese stones have several advantages over harder stones. Because they are softer, they do not become glazed or loaded with detritus. Plus, they are lubricated effectively with water rather than oil, but can be used with either. Submerge the stone in water for about 5 - 10 minutes. Continue to apply water while sharpening with the Whetstone Cutlery Two sided Whetstone Sharpening Stone. The stone releases small particles during the sharpening process; this powder in combination with water allows the sharpening. After a while you will notice a small burr at the edge. Now repeat the same process on the other side of the blade. Finally, turn the stone over and repeat the procedure, this time using the finer grit of the stone. In order to remove the remaining burr, pull the blade at an angle over the stone. Rinse the stone and clean off the grinding residue. Clean your knife with hot water.
A shinkansen is a Japanese-style pull-through sharpener named after the famous bullet train. It features two sets of ceramic wheels set at the right angle for sharpening a Japanese blade, which takes out the guesswork of the waterstone. Simply hold the handle with your left hand, then saw back and forth gently through the coarser wheel to sharpen, before switching to the finer wheel to polish.
Sharpening kit: Sharpening kits appear at the top end of the market for knife sharpeners, as they have multiple parts to ensure a proper result. The kit allows you to set the sharpening angle you want to use, while working from course to fine sharpening. Sharpening kits work great for both sharpening and honing. Using a sharpening kit properly requires some time invested in learning to use the kit. However, for those who demand a perfect blade, the sharpening kit achieves the desired result with full manual control.
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer.
Every few months, you'll notice that your chef's knife has a harder time yielding perfectly thin slices and precise dices. You might even find your knifework is slipping—literally. And aside from being annoying to cut with, a dull knife can be seriously dangerous. To keep your fingers (and your dinner) in good shape, you'll want to learn how sharpen a kitchen knife by using a whetstone or a sharpener, and maintain that edge by honing it with a steel rod.
The newly designed dual-sided combination whetstone from Fallkniven features a super fine white ceramic stone (0, 1 micron) with a grit of 1400 to 2000 and the dark grey ceramic stone is made of synthetic sapphires (1 micron) and has a grit of 800-1000. There is no need to add any oil or water, just lay the blade on the stone, raise the blade's spine and deburr your blade on the grey side until it has a razor-sharp edge and then use the smooth white side to get a nice polished edge.
If I am to be completely honest, I must tell you that I actually came extremely close to selecting another manual sharpener for this position. I thought it looked wonderful. It had all the specifications I would hope for in a manual knife sharpener and then some. It boasted the ability to sharpen at two different angles (15 degrees and 20 degrees) and included a honing feature. It looked solidly built. It used diamonds to grind the blades down. It sounded perfect and I almost selected it, until I read the consumer reviews. The consumer reviews for that apparently perfect manual knife sharpener were abysmal.
I've been using this stone for months and have started to find that, while the fine side does provide a nice sharp edge, the 400gr side is wearing my knives unevenly, which causes me to be unable to finely sharpen the entire length of the blade when moving to the fine side. The logo that is put in the middle of the 400gr side of the knife is causing more material to be removed than the rest of the blade when I'm sweeping across. I even verified this by going straight down the length of the fine side and watching the wear pattern come from the material coming off of the knife onto the stone.
If you have the time to commit to a block sharpener, this two-sided King stone should manage to meet your needs. Of those consumers who actually knew how to use this type of sharpener and those who took the time to learn how to use it, the overall consensus was that it is worth its fairly average price. Consumers were most impressed with how well this stone worked when it was wet, but noted that it is also rather useful when dry.
Start off on the rough grit side of the stone. Check the grit on your stone, or the packaging that came with the stone, to identify which is which. In general, whetstones and diamond stones each have different grits on either side. The rough grit side is used to grind the steel down, while the fine grit side is used to sharpen or hone the knife. The grinding process comes first, so you start on the rough grit side.
The angle on a Buck Knife is set based upon how we feel the knife will be used. Heavy use needs a strong and blunt "V" while skinning or filleting would need a deeper but more vulnerable "V". We tend to grind to 13-16 degrees per side (see illustrations). If you match the existing edge angle and hold the knife against the stone to cut evenly across the edge grind, you will produce an edge with a similar angle.
Medium Grit Stones: The number range here is from 1000 to 3000, with the latter being the basic, go-to sharpening stone. If your knives have lost their edge and need a good sharpen, then this is the grit you should start with. Don’t use it too often or the knife wears down rapidly. If you like to sharpen regularly, then the 2000 and 3000 grit are the ideal choice as they are less coarse, but please remember they are designed for sharpening and not maintaining the edge.
Despite being called a “4-Stage” sharpener, this is actually two 2-stage sharpeners in one. You can easily choose between a two-stage sharpener built for a 28 degree angle (14 degrees per side) and one built for a 20 degree angle (10 degrees per side). A sliding plastic guard covers whichever type you are not using to reduce confusion and stop you from accidentally placing your knife into the wrong slot. As someone who likes some knives to be sharper than others, I find this to be quite an impressive feature.
I have this one and the axe/machete version as well. These are great sharpeners that make very short work of getting blades sharp. They take off quite a lot of material and are quite different than most other stone sharpeners I have used in the past, so I try to be conservative with my pressure as you see the chips fall when you pull the knife through. But, they absolutely work, and work very well. If you have a high use knife, this is a great way to keep it sharp and in service all the time. I use my large bushcraft knife a lot more now that I have this since I can sharpen it much faster and easier. I would not use this sharpener on precision instruments just because I prefer more control and try to preserve material on those types on knives. But, bottom line, I get more work done and much faster now that I have this.
Some of the videos I watched suggested soaking the stone for 12-15 minutes prior to use. One suggested using vegetable oil on the surface versus water/soaking (I used water and presoaking it for 15-minutes). So instead of a simple 'out-of-the-box-and-use' approach, it required a bit of research before sharpening a knife. Otherwise I would have given this product a 5-star rating.
All rights reserved. WARNING - Under the Liquor Control Reform Act 1998 it is an offence to supply alcohol to a person under the age of 18 years (Penalty Exceeds $17000). It is an offence for a person under the age of 18 years to purchase or receive liquor (Penalty exceeds $700). This web site is operated by Chef’s Armoury. ABN 62 001 477 014. Liquor Licence 36129161.
A: You can sharpen your knives by hand using a stone or you can use a manual powered 1-stage, 2-stage or 3-stage sharpener or you can use a multi-stage electric powered sharpener. The choice is yours. Many people prefer not just the affordability but the precise control they have with an oil or water stone. While others opt for the more predictable results they get from an electric powered sharpener. It’s really a matter of taste.
My husband bought this to sharpen my cooking knives which were extremely dull. Now this didn't sharpen certain knives that we have but the ones I use all the time including my meat cleaver are now razor sharp. It is worth the money if you or you know someone who knows how to use this product. Remember that knives have different types of blades and some will need to be professionally sharpened.
Certain knife sharpeners require you to spend up to 15 minutes of your life, just to get the edge or sharpness that you desire. If you are a busy individual, you may not have all that time in your life, and that is where the SunrisePro Knife Sharpener comes in. It makes the whole process of sharpening a knife easy and fast. It doesn’t matter how dull or damaged your blade is, this machine gets the job done within a few seconds.
Whetstones may be natural or artificial stones. Artificial stones usually come in the form of a bonded abrasive composed of a ceramic such as silicon carbide (carborundum) or of aluminium oxide (corundum). Bonded abrasives provide a faster cutting action than natural stones. They are commonly available as a double-sided block with a coarse grit on one side and a fine grit on the other enabling one stone to satisfy the basic requirements of sharpening. Some shapes are designed for specific purposes such as sharpening scythes, drills or serrations.