I have this one and the axe/machete version as well. These are great sharpeners that make very short work of getting blades sharp. They take off quite a lot of material and are quite different than most other stone sharpeners I have used in the past, so I try to be conservative with my pressure as you see the chips fall when you pull the knife through. But, they absolutely work, and work very well. If you have a high use knife, this is a great way to keep it sharp and in service all the time. I use my large bushcraft knife a lot more now that I have this since I can sharpen it much faster and easier. I would not use this sharpener on precision instruments just because I prefer more control and try to preserve material on those types on knives. But, bottom line, I get more work done and much faster now that I have this.
The Chef’s Choice 476 2-Stage Sharpener transforms your weary kitchen, hunting and pocket knives into razor sharp cutting instruments with dependable ease. The sharpener is simple in concept, solid in its fabrication and reliable in the way it goes about its business. The design is also free of right-hand bias which is good news for the lefty chefs out there.
Based in Lancaster, PA, WebstaurantStore is the largest online restaurant supply store serving food service professionals and individual customers worldwide. With thousands of available products and over 5.5 million orders shipped, we have everything your business needs to function at its best. Over the years we have expanded our selection of wholesale supplies and commercial equipment to include healthcare, educational, and hotel supplies.
1. Start off with the rough grit. If you have a particularly dull blade, start off with the rough grit side of your sharpening stone. How do you tell which side is the rough grit? Sometimes you can tell by sight. If you can’t do that, do a thumbnail test. Scratch the surface with your thumbnail and whichever side feels rougher, that’s the side you want to start off with. Also, rough grits tend to be more porous than finer grits. So if you put water on one side and the stone really drinks it up, chances are it’s the rough grit.
High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge. They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.
In most cases a sharpening stone will be a combination of sharpening grains and a binding agent. However, in case of a Ardennes Coticule it is a completely natural product. The grains have cutting edges which enables them to sharpen your knife. As soon as a sharpening stone is used little pieces of the grains break off, revealing a new cut ing edge. The higher the number, the finer the grain. Stones with coarse grains (up to grain 400) can be used to shape the blade of a blunt knife. You can subsequently take care of the fine finish with a stone with a smaller grain.
Method 2: Send it out to a professional. This is a good option, provided you have a good knife sharpener living nearby, and are willing to pay to have the services performed. If you plan to sharpen your blades a dozen or so times a year, as I do, this can get quite expensive. All but the best professionals also use a grinding stone that, again, will take away much more material than is necessary from your blade, reducing its lifespan. Want to forge a stronger relationship with your blade? Then you'll want to...
The Chef’s Choice 250 Diamond Hybrid Sharpener offers both electric and manual. It features 3-stage hybrid sharpening technology. In which the first 2 stages are for sharpening which is electric, and the 3rd stage is for manual honing or polishing. In stage 3, it features ultra-thin diamond abrasives to ensure a sharp polished edge of the blade. You can use the knife sharpener to sharpen straight and serrated blades such as kitchen and household knives, as well as sporting or pocket knives. Like all Chef’s Choice Knife Sharpeners, the 250 model is engineered and assembled in the USA.
If you don't want to learn the skill of sharpening on a stone, a pull through sharpener may be a good option. The pull through sharpener consists of one or more smalle grinding wheels with a fine or coarse grit. In order to sharpen the knife you pull the knife several times through the grinding wheels without really pushing. The results of this shaprening method are of lower quality than sharpening rods and stones. The result is a relatively jagged edge, and the sharpness is of short duration. To get really sharp knives, it is therefore advisable to use one or more sharpening stones. The fast and somewhat rough treatment of a pull through sharpener is, in particular for harder steels, not recommended. A good knife actually deserves a more sophisticated sharpening method, such as sharpening on a stone.
Oil Stones differ from water stones in that they require the use of honing oil to float the swarf (metal particles). Also, these stones are commonly made from one of three different materials consisting of Novaculite, Aluminum Oxide (Corundum), or Silicon Carbide (Carborundum) and they all use oil to lubricate the stone and suspend the swarf in order to prevent the stone from becoming clogged. Also, while Novaculite and Coticule are the most traditional types of oil stones, there are also synthetic oil stones made by the Norton abrasives company called “India Oil Stones”.
Most professional knife makers mainly use flexible belts, when putting a razor sharp edge on the blades. You can now use the same technology at home to sharpen your knives, every time they become dull. You might have other sharpening tools and methods at home. However, it is quite hard to find one that does the job better and faster than the Work Sharp WSKTS-KT Knife sharpener.
The surface of these types of metal alloys will not discolor due to rust or other oxidation. These special alloys are different to carbon steel because they are metals that have an active-passive nature. Nevertheless, they can often rust—although you may not notice it. Food residue or water can allow rust to form in places where oxygen cannot easily reach. Rust can quickly penetrate near the blade tip, so wash your knife in a detergent solution after use, then dry it with a towel and store it in a dry place.
The Adjustable Angle Pull-Thru Knife Sharpener will sharpen all your knives (hunting, kitchen, and pocket) at the same angle as the original factory grind. Stop messing with the complex, cumbersome, and time-consuming Precision Sharpening Kits and get a simple, easy to use knife sharpener that offers more angles and sharpens both sides of the knife blade at the same time.
The more you use the sharpening stone; the edges of each particle within the stone tend to become slightly rounded over time. When you notice that it is taking much longer to hone blades and edges, it means you need to replace the stone with a new one. Sharpening stones come with decks that make it convenient to keep the tool in balance on the stone.
Japanese whetstones (also called water stones) – both natural and synthetic – are known for their quick-working qualities, not only for Japanese blades, but also for their Western equivalents. The small particles that do the cutting are loosely bound together in the stone, and so during sharpening with the whetstone, the surface particles are quickly washed out, allowing new, sharp, particles to start working on the blade. These whetstones must be lubricated only with water! Never use oil or other lubricants!
A hybrid manual-electric sharpener, the Chef’sChoice Hybrid 210 uses a motor and abrasive wheels to grind the new edge and employs a manual stage to hone it. This sharpener is eminently affordable. However, our top pick, the ProntoPro 4643 multi-blade-angle manual model (as well as its $30 to $40 single-blade-angle kin) produces a better edge and doesn’t make us worry about breakdowns the way the Hybrid 210’s lightweight motor does.
All rights reserved. WARNING - Under the Liquor Control Reform Act 1998 it is an offence to supply alcohol to a person under the age of 18 years (Penalty Exceeds $17000). It is an offence for a person under the age of 18 years to purchase or receive liquor (Penalty exceeds $700). This web site is operated by Chef’s Armoury. ABN 62 001 477 014. Liquor Licence 36129161.
We used the honing rods on multiple knives, including our top pick for chef’s knives, the 8-inch Mac MTH-80—a hard Japanese blade—and a vintage 12-inch Wüsthof, a German knife with a softer blade. That covers the two main types of knives that people commonly own. To dull the knives between tests, we repeatedly sawed through 1-inch-thick hemp rope, a classic challenge used by knifemakers to demonstrate their blades’ durability. We focused on 12-inch rods, because a longer rod is easier to use—it offers more room to sweep the length of a standard 8- or 10-inch chef’s knife.
Electric sharpeners use rotating ceramic or abrasive-impregnated metal wheels to grind a new edge into a blade. Low-end models, which start at about $25, feature a single set of coarse wheels that produce a rough, if potentially serviceable, edge—it depends on how even the edge is, and that’s a matter of overall design and engineering. Higher-end models can cost $200 or more (and professional models for slaughterhouses can approach $1,000), but they feature stronger motors and multiple grinding wheels—coarse, fine, and often polishing/honing—that when well-engineered can put an extremely keen, durable edge on knives of every style and quality.
I’ve been sharpening knives since I was 9 or 10 years old, starting with a Browning pocket knife that I still carry. Later, working on a cattle ranch, I was at various times responsible for keeping the butcher’s knives and the boarding house’s kitchen knives in good working order using Arkansas oilstones. I’ve been cooking for myself for almost 20 years, and I’ve been keeping my trusty santoku shaving-sharp that whole time using Japanese waterstones (more on those in How we picked). So I appreciate a truly fine edge. But I’m also big on the Korean concept of koenchanayo (“that’s good enough”), and so for the past seven years I’ve also used an electric sharpener for my cheap, stamped-steel paring knives (which Wirecutter’s Lesley Stockton also loves) and for my expensive, forged heavy chef’s knife. In short: I’m not one of those knife geeks for whom nothing less than an atom-splitting edge is acceptable. The defining characteristic of a sharp knife is that it cuts neatly, easily, and safely in its intended tasks—and there’s more than one way to get an edge that sharp.
As noted above, both Chef’sChoice and Cook’s Illustrated advocate using the Trizor XV to convert 20-degree knives to the arch-shaped 15-degree edge, so if you have European-style knives, you can still use this machine confidently. You can also use the final honing stage to “strop” serrated knives—helping to keep the teeth polished and aligned—but the Trizor XV cannot resharpen them.
Sharpening stones consist of coarse, abrasive material bound together to form solid stones. As you run your knife along the stone, the abrasive material will cut away microscopic layers of metal. You can see this metal in the dark paste that will form on the stone called the slurry (more on this later). Lower grit stones will remove metal more quickly, and provide a coarser edge. These are great for re-establishing an edge quickly and removing any dents or chips from your blade. As you increase in grit, the stone particles get finer, removing less metal with each pass and helping to create the polished, smooth edge that makes your knife screamingly sharp.
It’s only the 2nd electric powered sharpener on our list but you can’t lose if you make the Chef’s Choice Trizor 15XV your sharpener of choice for double and single bevel Asian knives. This 3-stage sharpener provides something others don’t in that it converts any blade to a hyper-sharp 15 degree blade. The graduated manner by which it reaches that preferred angle also ensures the blade stays sharper, longer. And isn’t that the name of the game?
Clauss DualDrive is the first non-chuckable sharpener for Clauss DualDrive is the first non-chuckable sharpener for both #2 and carpenter pencils. Just use with your current bit on the fly. Manual or power-driven design evenly sharpens. Integrated shaving reservoir with see-through window. Features high carbon steel blades and a lifetime warranty. More + Product Details Close
The word “Novaculite” is derived from the Latin word “novacula”, which means “razor stone” and is essentially a metamorphic, recrystallized, variety of Chert composed mostly of microcrystalline quartz that is found in the found in the Ouachita Mountains of Arkansas and Oklahoma and in the Marathon Uplift of Deposited in the Devonian Period and the early Mississippian Subperiod some 410 to 325 million years ago and subjected to uplift and folding during the Ouachita orogeny of the Atokan Epoch (early Pennsylvanian Subperiod), Novaculite is a very tough stone that is resistant to erosion and thus, the various layers of Novaculite stand out as ridges in the Ouachita Mountains. Thus, due to both its availability and its composition, it has been mined since ancient times for use as arrowheads and spear heads as well as in more modern times for use as sharpening stones.