If you do not remove enough metal to create a new edge, you will leave some of the dull edge in place. A dull blade (or a blade with dull spots or nicks) will reflect light from the very edge of the blade. A razor sharp knife edge will not show "bright spots" when you hold it blade up under a bright light. You will need to remove enough material from the sides of the bevel so that the edge stops reflecting light.
Knife sharpeners need to be able to create an exact angle on the knife's edge. American and European knife blades use a 20-degree angle out of the factory, as Chef's Choice explains, while Asian knife blades use a 15-degree angle. Hence, many people prefer a knife sharpening machine to a simple manual stone, because the machine helps guide you to maintain the proper angle on the blade.
The thumbnail test (not recommended for novices) - With this test you take your newly sharpened blade and run it oh-so-delicately over your thumbnail. If you feel it digging in even a tiny bit, it’s likely sharp enough. If on the other hand it just slips and slides across the surface of your nail it’s not sharp yet. Again, this test is only recommended for people with lots of experience handling knives and even then they’d probably be better off just grabbing a tomato or a piece of paper.
The surface of these types of metal alloys will not discolor due to rust or other oxidation. These special alloys are different to carbon steel because they are metals that have an active-passive nature. Nevertheless, they can often rust—although you may not notice it. Food residue or water can allow rust to form in places where oxygen cannot easily reach. Rust can quickly penetrate near the blade tip, so wash your knife in a detergent solution after use, then dry it with a towel and store it in a dry place.
This impressive Chef’s Choice sharpener is not the only Chef’s Choice sharpener on this list. That must tell you something about its quality. I must say that I was very impressed with this sharpener. It features three stages: rough, fine, and hone. The first two stages use sharpening discs with diamond flecks as abrasives. They gently file down your blade, bringing it to a smoother, sharper point. Stage three features patented honing and polishing discs designed to straighten your blade for the sharpest, cleanest cuts possible. Its rubber feet keep it firmly planted upon your countertop for an easy and safe sharpening process.

Silicone Carbide whetstones on the other hand, are the fastest cutting of the three types of oil stones and the stones made by Norton are called Crystolon Stones. Also they too are graded as either fine, medium, or coarse stones depending on their grit. But, although these stones will not produce an edge as fine as Arkansas Oil Stones or India Oil Stones, their fast cutting ability makes them ideal for sharpening tools as well as for cutting the initial edge bevel on extremely dull knives or repairing the edge on damaged blades. Last, because they sharpen so quickly, it a common practice to start with a coarse Crystolon Oil Stone and then progress to either a medium or fine India Oil Stone and then to finish with an Arkansas Oil Stone.
The newly designed dual-sided combination whetstone from Fallkniven features a super fine white ceramic stone (0, 1 micron) with a grit of 1400 to 2000 and the dark grey ceramic stone is made of synthetic sapphires (1 micron) and has a grit of 800-1000. There is no need to add any oil or water, just lay the blade on the stone, raise the blade's spine and deburr your blade on the grey side until it has a razor-sharp edge and then use the smooth white side to get a nice polished edge.
To use a whetstone you run the knife's blade back and forth across the stone's surface and due to the constant friction with the stone, which acts like a piece of sandpaper, the knife's edge becomes razor sharp and has a brilliant mirror shine. If you are a beginner at using a whetstone it can a take a while to master the sharpening process, so here is a video to help you with your sharpening stone skills.
For the cooking enthusiast without sharpening experience, an electric sharpener could be a great help. The electric sharpening machine has one or more slots with different types of sharpening wheels. The slots are already in a fixed grinding angle, providing a fixed, reliable edge. This benefit can also be a disadvantage, since European knives are sharpened under a different angle than Japanese knives. By pulling the knife through the slots one by one, it will be thoroughly sharpened. The electric sharpeners are pretty easy to use and deliver a good result. However, a sharpening turn removes significantly more material from the blade then with the use of a sharpening stone. This means that your knife will end up with a shorter life span if you use the electric sharpener regularly. For pocket knives, we do not advise to use an electric sharpening machine. This is because the machine removes quite a lot of material and pocket knives generally already have a thin blade.
Most people don't think about sharpening knives until this vital kitchen tool is no longer sharp. The truth is that nothing impacts the longevity of your knives, or their daily performance, more than regular sharpening and maintenance. A dull knife in the kitchen is more dangerous than a sharp one when employees must force their way through cutting meat and slicing vegetables. As a result, daily sharpening and maintenance is easy, and most importantly, necessary. We're here to show you how to use a sharpening stone, including correct techniques and maintenance. The end result is a more efficient, and safer, set of knives!
This knife sharpening system comes with a firm grip, to ensure a fine finish. This device does not slip around when sharpening your knife. You just need to hold it firm and it will adhere to the surface. This ensures that you get the desired results. The carbide surface is optimized to handle any type of knife. It doesn’t matter how blunt or damaged it is, it will give you a fine edge, for precision cutting.
using an appropriate blade for the task – a thinner blade for more delicate work, and a thicker blade whenever a thinner blade is not required (e.g. a thinner blade might be used to cut fillets, butterfly steak or roast for stuffing, or perform Mukimono, while a thicker one might be used to slice or chop repeatedly, separate primal cuts of poultry or small game, or scrape and trim fat from meat or hide, as these actions would be more likely to cause unnecessary wear on a thinner blade.)
Turning to the sharpeners themselves, we looked at aspects such as ergonomics, speed and simplicity of use, noise level and overall power (for the electric sharpeners), and build quality. We also weighed cost against performance to get a subjective measure of value. After two hours, we had clear picks for the winner and the upgrade choice, as well as an option for people who want high style along with high performance.

Every finished product you serve to your customers goes through a number of steps from growing, harvesting, and shipping to receiving, prepping, and serving. In each one of these steps, potential food safety hazards that might sicken or injure the final consumer are present. However, with careful planning, these hazards can be prevented, reduced to safe levels, or even eliminated altogether. Keep reading to learn what a HACCP plan is and the steps needed to create your own. What does HACCP Stand For? HACCP stands for Hazard Analysis and Critical Control Points. It is a system restaurant operators put in place to help them identify and react to dangerous biological, chemical, or physical food contamination. The goal of this food management s


We offer a range of Sugimoto Chinese kitchen knives to meet our customers' needs. Please ensure that you use the proper knife for the job. Using the incorrect knife may result in damage to the blade or personal injury. Do not use the side of a Chinese kitchen knife to pound garlic or ginger, as this may warp the blade. If you continue to sharpen such a deformed blade without having it repaired, the blade’s steel core will become misaligned and the knife will become irreparable. (Layered-steel blades)
It’s up to you if you want to use a sharpening steel or a handheld knife sharpener for honing your knives. The handheld is really easy to use. For fast, effective sharpening, simply place the blade in the slot and gently pull it through a few times. If you want to use a sharpening steel, just make sure it has a higher hardness factor than the knife to be sharpened. One more important thing: don’t ever hone serrated knives. They must be sharpened by a professional or replaced. Period.

The Chef'sChoice Diamond Hone Sharpener 315XV edge is The Chef'sChoice Diamond Hone Sharpener 315XV edge is incredibly sharp and the ultimate edge for effortless cutting. This innovative two stage sharpener combines the strength and durability of the double-bevel edge with our flawless ultra-sharp 15° edge technology. This unique sharpener features advanced spring guides for ease of use and ...  More + Product Details Close
Some of the videos I watched suggested soaking the stone for 12-15 minutes prior to use. One suggested using vegetable oil on the surface versus water/soaking (I used water and presoaking it for 15-minutes). So instead of a simple 'out-of-the-box-and-use' approach, it required a bit of research before sharpening a knife. Otherwise I would have given this product a 5-star rating.
Truly meant for honing, this rod features deep grooves which extend the length of the rod. As you sweep your blade along these grooves they will gently work to pull its edge back into proper alignment, making it stronger, straighter and allowing it to stay sharp for longer. Consumers appear to be very happy with this rod’s performance and construction. Their reviews give off an overwhelming impression that this rod is reliable and gets the job done right (so long as you know how to use a honing rod).
The coarse stone will cut the metal off quicker but it is going to give you a rougher edge but that way the job gets done quicker, without the oil. It is not as messy. This is just a real simple set up. If you do wood work you can make a little wooden box and rout it out. In this particular case it is just a 2x4, stone traced out, finishing nails tapped down so they are deeper than the stone so when you drop the stone in, if you are at a workbench you can C-clamp it down in place or you can hold on to it.
I can personally verify that this will get your knives very sharp. I will spare you all the gory details, but the picture is of the instructions the ER sent me home with after stopping the bleeding and patching me up. I have to say, that’s not what I had in mind regarding “Thanksgiving tips”. So: not only will knives slide easily through spinach, but they will go through finger and fingernail like a hot knife through butter after being sharpened by this whetstone. Very clean, straight cut. Impressive, really. Just take it slow and don’t be a moron like me.
Some of the videos I watched suggested soaking the stone for 12-15 minutes prior to use. One suggested using vegetable oil on the surface versus water/soaking (I used water and presoaking it for 15-minutes). So instead of a simple 'out-of-the-box-and-use' approach, it required a bit of research before sharpening a knife. Otherwise I would have given this product a 5-star rating.
My first set of sharpening stones so I have nothing to compare them to. For $50, though, great price to get into the world of sharpening. Stones are great and easy to use. Was able to put hair shaving edges on knives. Took a couple of knives to feel comfortable and better with the process and how to sharpen, but the stones you get work great. Here's the secret though. Get the green leather stoping block as well. As great as the stone are, I have found that stroping the knife after the fact is what really brings out that razor edge. And after using the knife, stroping it again, will restore and keep it razor sharp. Hope you enjoy it as much as I am.
Both Belgian Blue and Vielsalm Coticule are ancient stone layers found in the Belgian Ardenne Mountains with characteristics similar to both Novaculite and Siliciclastic sedimentary stone in that it is a metamorphic stone consisting of both gray and yellow volcanic ash mixed with tiny Spessartite Garnet crystals suspended in a clay matrix. However, due to its geology, both types of stone occur only in vertical seams sandwiched between two thick layers of bluish-purple slate and thus, they must be meticulously extracted mostly by hand. However, this type of extraction process is both very time-consuming and very labor-intensive and, quarrymen can only extract the stone for a few months each year due to inclement weather conditions. Consequently, both Belgium Blue and Coticule whetstones tend to be somewhat expensive.
Modern synthetic stones are generally of equal quality to natural stones, and are often considered superior in sharpening performance due to consistency of particle size and control over the properties of the stones. For example, the proportional content of abrasive particles as opposed to base or "binder" materials can be controlled to make the stone cut faster or slower, as desired.[7] Natural stones are often prized for their natural beauty as stones and their rarity, adding value as collectors' items. Furthermore, each natural stone is different, and there are rare natural stones that contain abrasive particles in grit sizes finer than are currently available in artificial stones.[citation needed]

Cerax and Suehiro stones from Suehiro are a little harder, and as such do not wear down as quickly as the classic Japanese water stones. The 8000 grit stone will perhaps give you the best cutting edge with a mirror polish on chisels and similar blades. Suehiro also makes a small combination stone for those who do not sharpen tools all that often and are reluctant to spend extra for a Cerax stone.
Learning sharpening technique requires focus even without worrying about the stone itself. Stones that require frequent flattening, soaking and cleaning, or that take a long time to create an edge can be a source of frustration to some beginning sharpeners. Keep in mind your willingness perform regular maintenance when choosing a starting set of stones.
Certain knife sharpeners require you to spend up to 15 minutes of your life, just to get the edge or sharpness that you desire. If you are a busy individual, you may not have all that time in your life, and that is where the SunrisePro Knife Sharpener comes in. It makes the whole process of sharpening a knife easy and fast. It doesn’t matter how dull or damaged your blade is, this machine gets the job done within a few seconds.

The thumbnail test (not recommended for novices) - With this test you take your newly sharpened blade and run it oh-so-delicately over your thumbnail. If you feel it digging in even a tiny bit, it’s likely sharp enough. If on the other hand it just slips and slides across the surface of your nail it’s not sharp yet. Again, this test is only recommended for people with lots of experience handling knives and even then they’d probably be better off just grabbing a tomato or a piece of paper.
Method 2: Send it out to a professional. This is a good option, provided you have a good knife sharpener living nearby, and are willing to pay to have the services performed. If you plan to sharpen your blades a dozen or so times a year, as I do, this can get quite expensive. All but the best professionals also use a grinding stone that, again, will take away much more material than is necessary from your blade, reducing its lifespan. Want to forge a stronger relationship with your blade? Then you'll want to...
The Presto EverSharp 08800 electric knife sharpener gets great reviews. In our test, though, its flimsy motor instantly bogged down when our knife contacted its sharpening wheels—and even light pressure threatened to stop the the sharpening wheels entirely. The high, wide guide frames meant it couldn’t sharpen the last ¾ inch of a blade, an unacceptable shortcoming. We’ll take our experience over the reviews.
×