Our large selection of stones from many well-known manufacturers will allow connoisseurs to find the ideal stone for their needs. Because all manufacturers formulate their stones to emphasize a different mix of qualities, and because these qualities can vary widely between different stones, most woodworkers choose stones from several manufacturers to build up an optimal set of sharpening stones. Then again, once you get to know the characteristics of certain types of stone, you may find one supplier who will provide all the stones you need. Sometimes this can be an advantage. But there is no one size that fits all; each stone must fit your needs and work style.
As noted previously, this automatic knife sharpener uses precision angle sharpening guides, which makes sure you obtain the proper angle with every use. It comes with two guides, which are the 50° guide and the 40° guide. The 40° guide is mainly used for thinner blades as well as kitchen knives. On the other hand, the 50° guide is used for outdoor and hunting knives.
To take off the fine scratches and the burr left by coarser stones, and polish the surface, one can use stones starting around 2000 grain. Above that there is theoretically no upper limit, but at the same time stones above about #10000 provide no measurable practical improvement in the edge. It is also interesting to note that above #8000 grit, there is no Japanese measurement standard. With all the stones labelled as having a finer grit, one simply has to take the manufacturer’s word for it.