Superior patented Austrian sharpening technology is the fastest Superior patented Austrian sharpening technology is the fastest way to sharpen any knife - and keep it sharp without removing metal. Patented spring-action design auto-adjusts to different blade angle (12° to 20° half-angle) for professional-quality results with standard serrated or Japanese-style single-bevel knives. Even high-quality Damascus blades can be honed ...  More + Product Details Close
The Juuma sharpening and honing stones offer a simplified working principle while at the same time ensuring the highest possible quality in the offered grits. Juuma Cobalt Blue stones are made of an aluminium oxide and a bonding agent. Adding cobalt serves to slow stone abrasion and increase the speed of sharpening. The speed bonus is especially marked when stoning blue steel (blue paper steel that is often used for Japanese planes and chisels). The cobalt gives the stones their blue colour. Juuma is our proprietary brand. Juuma sharpening stones are produced by a renowned Japanese whetstone manufacturer.
The humble sharpener tends to elicit more divergent opinions than just about any other type of kitchen tech. Everyone, it turns out, has their own take on which type of sharpener works best and why and most serious chefs aren’t shy about voicing their opinion. As you can imagine then there are a number of things most chefs – both professional and amateur – look for in a sharpener in order to ensure they get the one that’s right for them. These considerations include:
There will be a drawer that extends into the mechanism under the abrasives. Any detritus from the sharpening process drops into this drawer. Exactly where the drawer is located will differ from sharpener to sharpener but it shouldn’t be hard to find. Remove the drawer flick any material into the wastebasket and then wipe out the drawer with a damp cloth or tissue. You may want to use work gloves and goggles to protect your hands and eyes from any loose metal shavings. Once the drawer is clean and dry replace it. The exact means by which the sharpening mechanism itself is cleaned will vary from manufacturer to manufacturer. Consult your owners guide for specific details. Make sure you don’t introduce any grease or other lubricants into the sharpener unless specifically directed to do so by the owner’s manual. Also, the outside of the sharpener should come perfectly clean with just a damp cloth. Avoid using commercial cleaners or abrasives of any kind.
this is the first stone I bought. The price is right. Though it wears really quick. I would say buy a king brand stone. They are a little more but will last so much longer. The other problem is the stone wears at a strange angle which makes you constantly fix it. Also with the rust remover glued to the side if you don't remove it before fixing the stone will be slanted. Buy a king.
It takes time to sharpen a knife correctly. I spent about 30 minutes on an already fairly sharp knife. I then spent two more sessions of about 10 to 15 minutes each. I took it a bit further with a 6000 grit stone and this puts a nice polish on it. Instead of cutting through an onion, it glides or slips through it. It was truly shocking to me to use a really sharp knife. It may take a bit of time to get it right the first time, since this was my first time with a water stone, but it was well worth the effort. I have been trying to figure out the best way to get a really sharp knife.

High Grit Stones: These are also known as finishing stones with the number range going up to 8000, and give you a super refined edge.  They work great with Western knives as they cutting edge resembles a “U” as opposed to a “V”. If you are using your knife to cut meat, then you can happily stop at 4000 or 6000 grit. If you are only using it for vegetables or fruit go all the way to the 8000.
On the other hand, the surfaces of knives that have been looked after may blacken a little, but this is a different type of iron oxide than ordinary reddish rust. This black oxidation is mainly triiron tetraoxide (Fe3O4). It coats the surface of the metal and prevents ordinary rust from getting in. It will not discolor food and poses no threat to hygiene.
There are numerous types of stone sharpeners on the market. However, the Chosera 5,000 Grit Stone remains one of the best. This wet stone knife sharpener is an improvement on previous versions, allowing you to handle more blades. It uses magnesium as a binder. Since these stones don’t soak up water, you will have to sprinkle it with water regularly, during the sharpening process. Due to its hardness, it does not wear out easily, which adds to the overall durability.
This Messermeister rod is available in a 10-inch option and a 12-inch option, allowing you to select whichever suits you best. A general rule I like to follow in selecting a sharpening rod is to select one which is about the same size as my longest blade. As someone who’s longest blade is only 8 inches, I would select the 10-inch option. Most people will find themselves leaning toward that option, since bigger isn’t necessarily better. The rod needs only to be sufficiently long to allow you to sweep your knife down it without running out of rod before you reach the end of your knife. Anything too large will be difficult to control. Therefore, unless you are trying to sharpen a sword, I would advise against the longer option.

When the stone is intended for use on a flat surface, it is called a Bench Stone. On the other hand, small, portable, hand-held stones are referred to as Pocket Stones. Also, because Pocket Stones are smaller than Bench Stones, they are more easily transported but, they also present difficulty in maintaining a consistent angle and even pressure when attempting to sharpen longer blades. Consequently, Bench Stones are commonly used at home or in camp whereas, Pocket Stones are generally reserved for honing an edge in the field.
Grinding is generally done with some type of sharpening stone. Sharpening stones come in coarse and fine grits and can be described as hard or soft based on whether the grit comes free of the stone with use. Many sources of naturally occurring stones exist around the world; some types known to the ancient world are no longer used, due to exhaustion of former resources or the ready availability of superior alternatives. Arkansas, USA is one source for honing stones, which are traditionally used with water or honing oil. India is another traditional source for stones. Ceramic hones are also common, especially for fine grit size. Japanese water stones (both artificial and natural) come in very fine grits. Before use, they are soaked in water, then flushed with water occasionally to expose new stone material to the knife blade. The mixture of water and abraded stone and knife material is known as slurry, which can assist with the polishing of the knife edge and help sharpen the blade. Generally, these are more costly than oilstones. Coated hones, which have an abrasive, sometimes diamonds, on a base of plastic or metal, are also available.
The thumbnail test (not recommended for novices) - With this test you take your newly sharpened blade and run it oh-so-delicately over your thumbnail. If you feel it digging in even a tiny bit, it’s likely sharp enough. If on the other hand it just slips and slides across the surface of your nail it’s not sharp yet. Again, this test is only recommended for people with lots of experience handling knives and even then they’d probably be better off just grabbing a tomato or a piece of paper.
The product of German, and it works on sharpening standard knives and also Asian style knives at the comfort of your home. It is very easy to use making it very user-friendly. It has a soft grip handle that guarantees the user comfort when using the knife sharpener. The fitted weights and rubber base allows control, durability and heightened balance. The steel construction makes it durable and sturdy.

Oil Stones differ from water stones in that they require the use of honing oil to float the swarf (metal particles). Also, these stones are commonly made from one of three different materials consisting of Novaculite, Aluminum Oxide (Corundum), or Silicon Carbide (Carborundum) and they all use oil to lubricate the stone and suspend the swarf in order to prevent the stone from becoming clogged. Also, while Novaculite and Coticule are the most traditional types of oil stones, there are also synthetic oil stones made by the Norton abrasives company called “India Oil Stones”.
A nearly foolproof manual sharpener that looks like modern art, the angle that the knife is inserted into the sharpener determines how aggressive the sharpening is (yes, there is a correct angle for sharpening your knives). You can start by sharpening the knife then hone it to a fine finish in the same slot. If the knife doesn’t need sharpening, you can use this for honing only. This sharpener self-adjusts, and sharpens the knife edge to its original angle, so you don’t need to know the edge angle to sharpen the knife correctly, and there’s nothing to adjust. The tungsten carbide sharpeners will last a long time, but can be replaced when necessary.

It takes time to sharpen a knife correctly. I spent about 30 minutes on an already fairly sharp knife. I then spent two more sessions of about 10 to 15 minutes each. I took it a bit further with a 6000 grit stone and this puts a nice polish on it. Instead of cutting through an onion, it glides or slips through it. It was truly shocking to me to use a really sharp knife. It may take a bit of time to get it right the first time, since this was my first time with a water stone, but it was well worth the effort. I have been trying to figure out the best way to get a really sharp knife.
Whether you're a home cook or a professional chef, you already know that kitchen knives are important for food preparation. You don't want the blade to get dull. Not only does using a dull blade defeat the purpose of buying that expensive, high-quality knife in the first place, it also slips more easily while cutting, which isn't safe. Take a look at the knife sharpeners at HSN. Various styles are available, including whetstones, sharpening steels, hand-held sharpeners, and electric knife sharpeners. Manual knife sharpeners are usually (but not always) more affordable than their electric cousins. The sharpening steel gets the job done and doesn't take up much room in the cupboard. Whetstones are more gentle on metal. Just keep in mind that a smaller grit value means the grit is more coarse. A hand-held sharpener has a fixed angle for the blade, which makes the task easier for beginners. Electric knife sharpeners make the task even more straightforward. A knife sharpener is essential for any kitchen. Pick one up for yourself or for the cooking enthusiast in your life. For more gift ideas, take a look at the knife sets and other kitchen items at HSN.
I have had 20 different knife sharpeners in the past, including two that are the motorized type, as well as the manual stones, and the types that clamps are used to sharpen knifes. I have some nice and expensive knives I use in the kitchen as well for recreational use. This one is by far the best one to use for the kitchen. I have not tried it any Swiss Army knife type blades, but it does very well with my Victorinox kitchen knives. I highly recommend this sharpener. It is rather large but I actually like the fact that it is large as you can then hold it better. Also, try not to push the knife down on the sharpener, but instead use a steady motion, with minimal pressure and you will see small particles sharpened off. The knob above has presets for kitchen as well as hunting knives. This sharpener is well worth its price as the sharpening blades are easily removable. The pictures don't show it well but once you pull out the knob, the gray plastic cover easily comes off and the blades are held by the yellow pieces by screws. I have not yet found replacements but I don't think I will need them soon. The blades are still sharp after sharpening 20 knives. I sharpened my main santoku knife, chefs knifes and serrated steak knives and I was very impressed. Highly recommended.

If your knife isn’t restored by steeling, you may need to hit the fine ceramic stone a few times. You should rarely need the coarse notch after your knife is properly sharpened. That is, unless you’ve wrecked the edge by cutting on a too-hard surface or trying to hog your way through a bone. If that’s the case, you’ll have to hit the coarse and then the fine.
Superior patented Austrian sharpening technology is the fastest Superior patented Austrian sharpening technology is the fastest way to sharpen any knife - and keep it sharp without removing metal. Patented spring-action design auto-adjusts to different blade angle (12° to 20° half-angle) for professional-quality results with standard serrated or Japanese-style single-bevel knives. Even high-quality Damascus blades can be honed ...  More + Product Details Close

Start off on the rough grit side of the stone. Check the grit on your stone, or the packaging that came with the stone, to identify which is which. In general, whetstones and diamond stones each have different grits on either side. The rough grit side is used to grind the steel down, while the fine grit side is used to sharpen or hone the knife. The grinding process comes first, so you start on the rough grit side.
Cross-contamination of food can lead to serious health risks like food poisoning or unintended exposure to food allergens . If your kitchen staff members know how to prevent cross-contamination by correctly storing and preparing food, you can save the time and money that would be wasted on improperly handled food. By making the effort to separate your foods while storing and preparing them, sanitizing your kitchen surfaces and equipment, and practicing proper personal hygiene, you can create a safe and sanitary kitchen environment that is better for your customers, your employees, and your business. What is Cross-Contamination? Cross-contamination occurs when disease-causing microorganisms, like bacteria and viruses, are transferred from on
This sleek 3 slot knife sharpener has unsurpassed technology that allows the user to sharpen a knife to the original factory angle. It's easy to adjust the sharpening angle by simply pushing down and turning the knob, adjusting both the coarse and fine sharpening slots. If the angle of an Asian knife is unknown, use the recommended 16° marked clearly on the knob or select an angle within the red area. If the angle of Euro/American knife is unknown, use the recommended 20° marked on the knob or select an angle within the gray area. The fine sharpening slot features ceramic stones for finishing the knife edge and every day light honing and maintenance of an already sharp knife. The coarse sharpening slot features diamond stones that are used to sharpen dull or damaged knives. The serrated slot is a fixed angle slot. It does not adjust. It includes ceramic stones that are specifically designed to sharpen most styles of serrated knives.
Although it is slightly expensive than other tool sharpeners, this one saves you quite some precious time. It is one of the fastest ways to get all your blades sharpened. In addition, you just need to spend a few hours with it, and you will learn its entire operational procedure. Avoid excessive sharpening, since it might leave scratches on the blade’s surface.
When attempting to choose a whetstone for sharpening your favorite knife, the number of choices can be mind boggling. In fact, sharpening stones are divided into four distinct categories consisting of natural whetstones and manufactured whetstones which, in turn, are divided into two other categories consisting of oil stones and water stones. Then, there are numerous different varieties of natural whetstones consisting of several different materials that are quarried from different places around the world as well as several different types of man-made whetstones!
I am just starting out sharpening with whet stones. I have found these stones to be very nice and the instructional videos that come along with the set on knifeplanet are extremely helpful to anyone starting out. The cost of the set was very reasonable and seems to be a great value. The customer service is amazing, I lost the site for the videos and sent an email to get the information and immediately there was a reply with all of the links that I needed. I appreciate their attention to their customers!!
The 8,000 grit Kitayama is definitely a popular 8K stone, it is my favourite, and the feedback has much to do with that. It is silky smooth and feels creamy when you use it. When reaching refinement levels of 6k and above, polished bevels/edge are inevitable, and often sought after. The level of polish from this particular stone is very beautiful, assuming that you have done some refinement prior to this but it is a wonderful 8,000 grit stone.

Whichever method you choose, be it a waterstone (also known as a whetstone), or a pull-through (either V-shaped or ceramic wheels) it's important to regularly hone your knife with a honing steel, which we'll also cover below. You'll be pleased to hear that you won't have to reach for the stones too regularly – once every two or three months should suffice. 
Removing the burr is fairly simple. You'll need a leather strop or block (this sort of thing), which is designed to catch the metal fibres from the knife. You could do it with a fibrous tea towel or some newspaper if you like, but I'd suggest going with leather to begin with. The motion is fairly similar to sharpening. Draw the knife over the leather, going away from the edge at roughly the same angle as when you sharpened. 
Despite being called a “4-Stage” sharpener, this is actually two 2-stage sharpeners in one. You can easily choose between a two-stage sharpener built for a 28 degree angle (14 degrees per side) and one built for a 20 degree angle (10 degrees per side). A sliding plastic guard covers whichever type you are not using to reduce confusion and stop you from accidentally placing your knife into the wrong slot. As someone who likes some knives to be sharper than others, I find this to be quite an impressive feature.
Some experts recommend sharpening as if trying to slice a thin layer or decal off the stone. Don't consider doing this without significant experience: it is typically bad advice; most people don't hold the correct angle this way. You instinctively raise the blade until you feel and see the edge working. This creates larger edge angles and thicker bevels as time goes on and the results gradually deteriorate. The more you sharpen, the duller it gets. Sound familiar?
You’ll know you’re reached a stopping point when you can feel the slight catch of the bevel on the edge of the blade, by carefully running your finger in the direction of the blade, or by cutting through a sheet of paper. When the knife cuts cleanly through the paper, it’s time to hone the blade. Read our guide for more information about honing vs sharpening.
I have this one and the axe/machete version as well. These are great sharpeners that make very short work of getting blades sharp. They take off quite a lot of material and are quite different than most other stone sharpeners I have used in the past, so I try to be conservative with my pressure as you see the chips fall when you pull the knife through. But, they absolutely work, and work very well. If you have a high use knife, this is a great way to keep it sharp and in service all the time. I use my large bushcraft knife a lot more now that I have this since I can sharpen it much faster and easier. I would not use this sharpener on precision instruments just because I prefer more control and try to preserve material on those types on knives. But, bottom line, I get more work done and much faster now that I have this.
Okay, that’s not the only reason. This particular rod has received substantially more positive consumer reviews than all of the others. I suppose that the majority of people agree with me, then. It is difficult to turn down a rod which outperforms the others, though. This Wusthof rod has been specially designed to not only straighten your blade but also to give it a quick sand to keep it sharp for even longer than the typical honing rod.
×