If you want a quality sharpening tool, this is the product to go for. This is why we have rated it as number one due to the incredible service that it will offer you, comes with an ergonomic design that gives the user a secure and comfortable grip. It sharpens knives very fast and more efficiently. It has two stages of sharpening thus providing a chance to sharpen thick steel blades and the softer steel blades.
From camping to fishing to hunting, this sharpener can come with you wherever you go and quickly clean up any wobbly, rusty, slightly dull blade in a snap. The rod itself retracts into the handle to not only make it take up less space, but also to protect the sharpener from bumps, scratches, and the external environment. Once collapsed, it is small enough to fit inside your pocket and even features a pocket clip for easy transportation.
Last, it should be noted that dual-sided Coticule/Belgian Blue whetstones are also sometimes available which have a layer of Belgian Blue stone on one side and a layer of Coticule on the other. Thus, these whetstones provide a softer, more coarse, grit on one side and a harder, finer, grit on the other. Plus, due to the inherent toughness of the Belgian Blue stone, these dual-sided stones do not require a substrate layer.

One of the combinations of stones that I was introduced to several years ago is a unique one, it is a 500, 2,000 and 16,000 grit combination. I was apprehensive when I first tried this, that was thousands of knives ago, it works, it is fantastic combination. It is unique because the traditional way of thinking is that we should be doubling the grit sizes as we sharpen, for example, a 500 grit stone should be followed by a 1,000 grit, then 2,000 grit. This line of thought is meant to be flexible, it is a general rule only, I have broken it countless times.


Our test of the Brød & Taylor turned a dull blade into one that effortlessly and cleanly sliced both tomatoes and paper. Due to the reputation of V-notch carbide sharpeners, however, I was concerned about the durability of the edge, so I did an additional test: I used the Brød & Taylor to sharpen my old pocketknife, which uses 440C steel, one of the earliest knife-worthy stainless alloys and one that more refined alloys have since surpassed. I then made 50 slices through a cardboard box, rehoned and repolished the knife (but did not resharpen it), and made 50 more slices. After all that, I was still able to slice a tomato and peel an apple without problem. That’s impressive: Cardboard is so tough on blade edges that knifesmiths use it as a kind of stress test.
Some of the videos I watched suggested soaking the stone for 12-15 minutes prior to use. One suggested using vegetable oil on the surface versus water/soaking (I used water and presoaking it for 15-minutes). So instead of a simple 'out-of-the-box-and-use' approach, it required a bit of research before sharpening a knife. Otherwise I would have given this product a 5-star rating.

If you decide to use this device to sharpen a knife, you can simply attach the blade guide against the belt, creating a barrier against which you can lean your knife as you sharpen it. Leaning your knife against the guard holds it at a specific angle so that your blade can be sharpened to a specific angle. The angle is adjustable from 30 degrees down to 15 degrees. You can also choose to use this machine to sharpen tools, such as axes. If sharpening those types of blades, you will want to go with a freehand approach instead of using the guide.
✅ PREMIUM QUALITY : Our products have been inspected by a reputable third party inspection company. Each product has been checked,put under a durability and functionality test before shipped to you. NO COMPROMISE on quality! This simple-yet-unparalled award winning tool is used by everyone from stay at home moms to various professionals. Don’t forget to buy this as a PERFECT GIFT for your family & friends.
Okay, that’s not the only reason. This particular rod has received substantially more positive consumer reviews than all of the others. I suppose that the majority of people agree with me, then. It is difficult to turn down a rod which outperforms the others, though. This Wusthof rod has been specially designed to not only straighten your blade but also to give it a quick sand to keep it sharp for even longer than the typical honing rod.
I can personally verify that this will get your knives very sharp. I will spare you all the gory details, but the picture is of the instructions the ER sent me home with after stopping the bleeding and patching me up. I have to say, that’s not what I had in mind regarding “Thanksgiving tips”. So: not only will knives slide easily through spinach, but they will go through finger and fingernail like a hot knife through butter after being sharpened by this whetstone. Very clean, straight cut. Impressive, really. Just take it slow and don’t be a moron like me.
A single stone of 120 grit and a combination stone of 1000 and 3000 grits come along with a stone holder all for a price of less than many other individual stones. The stones are 6 7/8" long and 2 1/8" wide. A flattening stone of some kind would be needed, but with economical options available in those, the overall price of this kit would still be low. This entry level set is a good budget minded option.
Sharpening kit: Sharpening kits appear at the top end of the market for knife sharpeners, as they have multiple parts to ensure a proper result. The kit allows you to set the sharpening angle you want to use, while working from course to fine sharpening. Sharpening kits work great for both sharpening and honing. Using a sharpening kit properly requires some time invested in learning to use the kit. However, for those who demand a perfect blade, the sharpening kit achieves the desired result with full manual control.
When the stone is intended for use on a flat surface, it is called a Bench Stone. On the other hand, small, portable, hand-held stones are referred to as Pocket Stones. Also, because Pocket Stones are smaller than Bench Stones, they are more easily transported but, they also present difficulty in maintaining a consistent angle and even pressure when attempting to sharpen longer blades. Consequently, Bench Stones are commonly used at home or in camp whereas, Pocket Stones are generally reserved for honing an edge in the field.

Okay, that’s not the only reason. This particular rod has received substantially more positive consumer reviews than all of the others. I suppose that the majority of people agree with me, then. It is difficult to turn down a rod which outperforms the others, though. This Wusthof rod has been specially designed to not only straighten your blade but also to give it a quick sand to keep it sharp for even longer than the typical honing rod.


The company is to be commended for including links to instructional videos in the package. Those videos lay out clearly how to get the most from your Whetstone sharpener stone. Once you get up to speed you’ll likely enjoy the process and at the same time achieve professional quality results time and again. Sure, it’s not fancy and doesn’t have a sleek, chrome plated design but it works. 

Chefs and meat cutters frequently pause and “steel” their cutting edges. Steeling doesn’t sharpen an edge; it straightens it. That’s necessary because the thin edge actually bends or warps while you’re cutting. If you could see the edge under a microscope, it would look wavy, and it would feel dull while cutting. Steeling the knife straightens out all those waves to restore a straight, even cutting edge. So when your knife begins to seem dull, don’t sharpen it—steel it first. Every time you grab a knife for the first time to begin cutting, steel it before you even get started. But it’s important to do it right or you’ll just make the edge worse. And don’t act like one of the Iron Chefs on TV and do it all up in the air—you’ll eventually wind up in the ER. Rest the end of the steel on a cutting board and do your steeling the safer and more accurate way. It’s very important that you steel at an angle between 20 and 30 degrees. Photo 1 shows you how to figure that out.
The Chef’s Choice 250 Diamond Hybrid Sharpener offers both electric and manual. It features 3-stage hybrid sharpening technology. In which the first 2 stages are for sharpening which is electric, and the 3rd stage is for manual honing or polishing. In stage 3, it features ultra-thin diamond abrasives to ensure a sharp polished edge of the blade. You can use the knife sharpener to sharpen straight and serrated blades such as kitchen and household knives, as well as sporting or pocket knives. Like all Chef’s Choice Knife Sharpeners, the 250 model is engineered and assembled in the USA.
Our test of the Brød & Taylor turned a dull blade into one that effortlessly and cleanly sliced both tomatoes and paper. Due to the reputation of V-notch carbide sharpeners, however, I was concerned about the durability of the edge, so I did an additional test: I used the Brød & Taylor to sharpen my old pocketknife, which uses 440C steel, one of the earliest knife-worthy stainless alloys and one that more refined alloys have since surpassed. I then made 50 slices through a cardboard box, rehoned and repolished the knife (but did not resharpen it), and made 50 more slices. After all that, I was still able to slice a tomato and peel an apple without problem. That’s impressive: Cardboard is so tough on blade edges that knifesmiths use it as a kind of stress test.
The first slot contains carbide blades which effortless shave your blade as you draw it through. The blades feature microscopic carbide particles which help them rough up the edges of the blade as it moves through to get an even deeper shave. The second sharpening slot contains two ceramic rods which work to hone your blade as you draw it through. They gently pull your blade into alignment and buff away the rough edge etched into it in the first stage. You can even choose to skip the first stage and use only the ceramic rods to hone your knife on a regular basis.
One of the most well-regarded natural whetstones is the yellow-gray "Belgian Coticule", which has been legendary for the edge it can give to blades since Roman times, and has been quarried for centuries from the Ardennes. The slightly coarser and more plentiful "Belgian Blue" whetstone is found naturally with the yellow coticule in adjacent strata; hence two-sided whetstones are available, with a naturally occurring seam between the yellow and blue layers. These are highly prized for their natural elegance and beauty, and for providing both a fast-cutting surface for establishing a bevel and a finer surface for refining it. This stone is considered one of the finest for sharpening straight razors.[citation needed]
I wanted an upgrade to my Smith's pocket sharpener, and this is perfect for all of my fixed blade and folding knives. It sits firmly on flat surfaces. Drawing the blades through the stones is effortless. This is a great purchase as an alternative to using flat stones, which I've never been good at. It doesn't take long to set a nice edge on my knives.
✅ PREMIUM QUALITY : Our products have been inspected by a reputable third party inspection company. Each product has been checked,put under a durability and functionality test before shipped to you. NO COMPROMISE on quality! This simple-yet-unparalled award winning tool is used by everyone from stay at home moms to various professionals. Don’t forget to buy this as a PERFECT GIFT for your family & friends.
Historically, there are three broad grades of Japanese sharpening stones: the ara-to, or "rough stone", the naka-to or "middle/medium stone" and the shiage-to or "finishing stone". There is a fourth type of stone, the nagura, which is not used directly. Rather, it is used to form a cutting slurry on the shiage-to, which is often too hard to create the necessary slurry. Converting these names to absolute grit size is difficult as the classes are broad and natural stones have no inherent "grit number". As an indication, ara-to is probably (using a non-Japanese system of grading grit size) 500–1000 grit. The naka-to is probably 3000–5000 grit and the shiage-to is likely 7000–10000 grit. Current synthetic grit values range from extremely coarse, such as 120 grit, through extremely fine, such as 30,000 grit (less than half a micrometer abrasive particle size).[citation needed]
This set of two Norton combination waterstones provides four grits and also includes a flattening stone as an added value. The 220, 1000, 4000 and 8000 grit sides will handle everything from aggressive shaping to final polishing. They are 8" long by 3" wide, big enough to handle most knives and tools easily. Our most popular waterstone kit, this has everything you need to both sharpen with waterstones and maintain the stones themselves. A great starter set.
Jigs, such as the industry-standard Edge Pro, are an extension of the stone method, as they use simple but cleverly designed armatures to maintain a consistent angle between the stone and the blade. They’re extremely effective—professional knife sharpeners are some of their biggest champions—but they’re also expensive, and really practical only with a dedicated workbench.
Item arrived on time and in good working order. I got this as a gift for a friend that has a high end set of kitchen knives and needs a simple way to sharpen them. Slight learning curve but worth it in the end. The item is actually Japanese, with almost no English on it and everything written in Kanji. Watch some youtube videos on how to use this dual sided stone. I got the item on sale and it was a bargain, excellent value for the money. I highly recommend this product.
I can personally verify that this will get your knives very sharp. I will spare you all the gory details, but the picture is of the instructions the ER sent me home with after stopping the bleeding and patching me up. I have to say, that’s not what I had in mind regarding “Thanksgiving tips”. So: not only will knives slide easily through spinach, but they will go through finger and fingernail like a hot knife through butter after being sharpened by this whetstone. Very clean, straight cut. Impressive, really. Just take it slow and don’t be a moron like me.
The Arkansas Novaculite stone has earned the reputation of the most sought-after natural abrasive worldwide and is a premiere sharpening product used not just as a knife sharpeners, but as woodworkers, jewelers, surgeons, dentists, veterinarians, die makers, gunsmiths, and goldsmiths. Other applications: calibration of x-ray crystallography machines and maintenance of ice skate and snow ski’s.
With its premium series Select II, the whetstone manufacturer Sigma Power Corporation from Tokyo addresses users of high-alloy steels such as HSS. These stones, too, are obviously intended to engender a grinding experience similar to that of natural stones. The special production process is expensive, but the Sigma Select II probably has no equal when it comes to demolishing steel.
We offer a series of oilstone packages that combine India and Arkansas stones and are very reasonably priced. At 8" long by 2" wide these stones are not as wide as some other types, but still wide enough for many edges and are plenty wide for knife sharpeners. Available in four price levels, these kits are a great opportunity for the beginning sharpener on a budget.
The word “Novaculite” is derived from the Latin word “novacula”, which means “razor stone” and is essentially a metamorphic, recrystallized, variety of Chert composed mostly of microcrystalline quartz that is found in the found in the Ouachita Mountains of Arkansas and Oklahoma and in the Marathon Uplift of  Deposited in the Devonian Period and the early Mississippian Subperiod some 410 to 325 million years ago and subjected to uplift and folding during the Ouachita orogeny of the Atokan Epoch (early Pennsylvanian Subperiod), Novaculite is a very tough stone that is resistant to erosion and thus, the various layers of Novaculite stand out as ridges in the Ouachita Mountains. Thus, due to both its availability and its composition, it has been mined since ancient times for use as arrowheads and spear heads as well as in more modern times for use as sharpening stones.

I bought this knife sharpener for my son as a Christmas present years ago and recently (but cautiously) used it on my cutlery (Henkel and Wusthof). Frankly, I had been a little lazy and let my knifes lose a bit of their edge. I did not feel like getting out my stones and oil to do a proper job, so I borrowed my son's sharpener. It really works great, which I hate to admit, as it feels like a cheat and it is a fraction of what I spent on stones. I realize that I need to buy one for myself, so I looked around to see if there is anything better and I could not see anything that looked better. This one is adjustable, which is what I need. I looked at the 1 star ratings and there was a common theme that the knife edge chatters as the blade is pulled across. It can, if you don't use it properly! If your blade is very dull, you will need to pull with a very light, steady, and quick motion. You never need to push down hard as you pull. Even pressure. Don't be a brute! Finesse is what is needed. I am going to buy another one for me.


The Chef’s Choice 316 sharpener will restore your dull knives to professional sharpness. It’s a great, reliable, well-built kitchen appliance that requires no special knowledge or setup. The precision guides of the 2-stage system make sure the blade is firmly held at the correct angle so that optimal sharpening is realized with minimal fuss. Great for your Asian-style knives or those you’d like to endow with an Asian-type edge for some precision cutting.
I like the fact that there are two different grits (can be seen as two colors). the black rubber feet stick to the kitchen granite top like glue. The 1000 does a pretty good job of getting a knife roughly there and the 4000 puts on a fine polish for razor a sharp edge. I would go the extra step of stropping the knife after the grinding operation for an extra sharp edge.
A single stone of 120 grit and a combination stone of 1000 and 3000 grits come along with a stone holder all for a price of less than many other individual stones. The stones are 6 7/8" long and 2 1/8" wide. A flattening stone of some kind would be needed, but with economical options available in those, the overall price of this kit would still be low. This entry level set is a good budget minded option.
It features an ergonomic and stylish design, as well as durable construction. When it comes to knife sharpeners, it is hard to come across that combination. In addition, it comes with a 2-stage sharpening system, which allows you to polish your knives to the desired sharpness. Its ergonomic design also ensures maximum comfort, when you are using it. It has a non-slip cushion at the bottom, which provides a stable base while the ergonomic handle gives you an easy and comfortable grip.
Both Belgian Blue and Vielsalm Coticule are ancient stone layers found in the Belgian Ardenne Mountains with characteristics similar to both Novaculite and Siliciclastic sedimentary stone in that it is a metamorphic stone consisting of both gray and yellow volcanic ash mixed with tiny Spessartite Garnet crystals suspended in a clay matrix. However, due to its geology, both types of stone occur only in vertical seams sandwiched between two thick layers of bluish-purple slate and thus, they must be meticulously extracted mostly by hand. However, this type of extraction process is both very time-consuming and very labor-intensive and, quarrymen can only extract the stone for a few months each year due to inclement weather conditions. Consequently, both Belgium Blue and Coticule whetstones tend to be somewhat expensive.
×