Truly meant for honing, this rod features deep grooves which extend the length of the rod. As you sweep your blade along these grooves they will gently work to pull its edge back into proper alignment, making it stronger, straighter and allowing it to stay sharp for longer. Consumers appear to be very happy with this rod’s performance and construction. Their reviews give off an overwhelming impression that this rod is reliable and gets the job done right (so long as you know how to use a honing rod).
A: We’re all told that a sharp knife is safer than a dull knife yet most everyone knows that merely touching a sharp knife can often result in a painful cut while we can wrap our hand around a dull blade with little worry. So why would anyone in their right mind claim that a sharp one is safer than a dull one? To a certain extent it’s a matter of semantics for sure, because there is no denying you have to be extremely careful around really sharp knives. But at the same time there is a very good reason to consider a dull knife to be more of a safety hazard than a sharp knife.
The word “Novaculite” is derived from the Latin word “novacula”, which means “razor stone” and is essentially a metamorphic, recrystallized, variety of Chert composed mostly of microcrystalline quartz that is found in the found in the Ouachita Mountains of Arkansas and Oklahoma and in the Marathon Uplift of Deposited in the Devonian Period and the early Mississippian Subperiod some 410 to 325 million years ago and subjected to uplift and folding during the Ouachita orogeny of the Atokan Epoch (early Pennsylvanian Subperiod), Novaculite is a very tough stone that is resistant to erosion and thus, the various layers of Novaculite stand out as ridges in the Ouachita Mountains. Thus, due to both its availability and its composition, it has been mined since ancient times for use as arrowheads and spear heads as well as in more modern times for use as sharpening stones.
The days of visiting the knife sharpener are gone. It is rare that you will see a knife sharpening truck roaming the streets, dinging its bell, on a search for customers. Those days are gone because newer, easier methods of sharpening knives have been developed. You no longer need to know special techniques and methods to properly sharpen a knife. You don’t need to worry about holding your knife at the perfect angle to get a nice straight edge.
I would say they are worth the money. Go for it. I took a blunted Pampered Chef kitchen knife from completely dull to razor sharp in about an hour (of bumbling and repairing mistakes LOL) heavy grinding. If you have a severely damaged blade, grab one of those cheesey two sided stones from Harbor Freight to do your heavy grinding. From there these stones will work very well.
The most important aspect of a sharpening stone is the grit. If you have knives that have taken a beating and are either nicked up or really dull, you’ll need a courser stone to get it back into shape. And in order to put an exceptionally sharp edge on an already sharp knife, you’ll need a finer grit stone. If your knives are already in pretty good shape and just need a touch up, buying just a finer grit stone might be enough, but don’t think you can get away without a courser stone for knives that need more TLC. It is possible to buy a combination, or two-sided sharpening stone.
Consumers have stated that a lot of metal is removed from the blade if you use all three stages. Usually, however, it is completely unnecessary to use all three stages. Most of the time you can easily get away with only using the fine grit and the honing discs to sharpen your knives. You can even use the honing discs on their own to keep your blades straight. The first stage (the rough grit) will only be necessary for sharpening extremely dull or damaged blades. Upon completing this stage, you will often find that you can skip right over to honing.
1. Start off with the rough grit. If you have a particularly dull blade, start off with the rough grit side of your sharpening stone. How do you tell which side is the rough grit? Sometimes you can tell by sight. If you can’t do that, do a thumbnail test. Scratch the surface with your thumbnail and whichever side feels rougher, that’s the side you want to start off with. Also, rough grits tend to be more porous than finer grits. So if you put water on one side and the stone really drinks it up, chances are it’s the rough grit.
There really is no point in having amazing knives if you don’t keep them sharp. Bert from TOG Knives has spent years experimenting with different sharpening methods and bits of equipment to work out the absolute best way to sharpen TOG Knives. If you follow the advice below we guarantee you will become a sharpening Ninja. Watch this space as we’ll be adding more videos in the future…