Our test of the Brød & Taylor turned a dull blade into one that effortlessly and cleanly sliced both tomatoes and paper. Due to the reputation of V-notch carbide sharpeners, however, I was concerned about the durability of the edge, so I did an additional test: I used the Brød & Taylor to sharpen my old pocketknife, which uses 440C steel, one of the earliest knife-worthy stainless alloys and one that more refined alloys have since surpassed. I then made 50 slices through a cardboard box, rehoned and repolished the knife (but did not resharpen it), and made 50 more slices. After all that, I was still able to slice a tomato and peel an apple without problem. That’s impressive: Cardboard is so tough on blade edges that knifesmiths use it as a kind of stress test.
The stick – With a stick sharpener hold the sharpener in front of you (facing away from you) with one hand and the handle in the other hand. Hold the base of the knife against the base of the tip at a slight angle and then push the blade along the stick pulling it across the stick at the same time. The tip of the blade should cross the end of the stick. To sharpen the other side of the blade place it under the stick and repeat the process making sure to reverse the angle at which you are holding the knife against the stick.
The final Chef’s Choice sharpener on our list is the 316 Diamond Sharpener. Like the 15XV the 316 is at its best when used to sharpen Asian-style knives and it does so with unflinching effectiveness and speed. This is a compact, 2-stage electric sharpener that produces the 15 degree edge so favored in Asian cutlery. Ideal for the preparation of sashimi or sushi.
Different knives are sharpened differently according to grind (edge geometry) and application. For example, surgical scalpels are extremely sharp but fragile, and are generally disposed of, rather than sharpened, after use. Straight razors used for shaving must cut with minimal pressure, and thus must be very sharp with a small angle and often a hollow grind. Typically these are stropped daily or more often. Kitchen knives are less sharp, and generally cut by slicing rather than just pressing, and are steeled daily. At the other extreme, an axe for chopping wood will be less sharp still, and is primarily used to split wood by chopping, not by slicing, and may be reground but will not be sharpened daily. In general, but not always, the harder the material to be cut, the higher (duller) the angle of the edge.
A sharpening stone is made of particles of abrasive material that are sintered or bonded together. The blade is moved across the stone and the steel is worn away, which creates the edge. However, at the same time, the stone is also worn away to reveal new, coarse particles. As a general rule, the softer the stone, the more rapidly it will wear and will be more aggressive in use. Harder stones don’t wear as quickly.
Oil stones have been around a long time, and while not as popular as in the past, they are still a practical option. Not as fast as the other stones, they are easy to use and their lower price makes them a good value for the budget conscious. With oil stones, the relation of the types and grits can be confusing. Our article, Difference in Sharpening Stone Materials, provides a more in depth explanation, but in general an India stone or two combined with an Arkansas stone is a good combination to start with.
This knife sharpener features precision-ground tungsten-carbide sharpener on bars which can automatically adjust to provide different blade angles. And just by changing hand positions, you can easily fine-sharp or hone the knife as often as you like. With regular honing, you will maintain a sharp edge without removing metal and extending the lifetime of the blade.
I'm a novice knife sharpener. I've had to unlearn what my grandpa taught me in order to use these. So far, I've had decent but mixed results. I've switched to my cheap 200/400-ish cheap tool stone from harbor freight for cutting a bevel when the blade has either been damaged or did not have a proper bevel. The 400/1000 grit stone in this kit is soft. Very soft. I have bowled it out several times. It makes keeping a steady angle difficult. But these stones at this price point are meant for learning, and for that they serve their purpose.
If I thought that the 12-inch option of the Messermeister rod was a little longer than necessary you must be wondering why I would include this Winware rod which is only available in a 12-inch option and a 14-inch option. I stand by my opinions and will confidently say here that I would not select either of these rods on the sole basis of their extreme lengths. That being said, many other consumers have selected these sharpeners, despite (or maybe because of) their length and have reported being very satisfied with the results they have achieved.
Every few months, you'll notice that your chef's knife has a harder time yielding perfectly thin slices and precise dices. You might even find your knifework is slipping—literally. And aside from being annoying to cut with, a dull knife can be seriously dangerous. To keep your fingers (and your dinner) in good shape, you'll want to learn how sharpen a kitchen knife by using a whetstone or a sharpener, and maintain that edge by honing it with a steel rod.
There really is no point in having amazing knives if you don’t keep them sharp. Bert from TOG Knives has spent years experimenting with different sharpening methods and bits of equipment to work out the absolute best way to sharpen TOG Knives. If you follow the advice below we guarantee you will become a sharpening Ninja. Watch this space as we’ll be adding more videos in the future…