Last, it should be noted that dual-sided Coticule/Belgian Blue whetstones are also sometimes available which have a layer of Belgian Blue stone on one side and a layer of Coticule on the other. Thus, these whetstones provide a softer, more coarse, grit on one side and a harder, finer, grit on the other. Plus, due to the inherent toughness of the Belgian Blue stone, these dual-sided stones do not require a substrate layer.
Whether you're a home cook or a professional chef, you already know that kitchen knives are important for food preparation. You don't want the blade to get dull. Not only does using a dull blade defeat the purpose of buying that expensive, high-quality knife in the first place, it also slips more easily while cutting, which isn't safe. Take a look at the knife sharpeners at HSN. Various styles are available, including whetstones, sharpening steels, hand-held sharpeners, and electric knife sharpeners. Manual knife sharpeners are usually (but not always) more affordable than their electric cousins. The sharpening steel gets the job done and doesn't take up much room in the cupboard. Whetstones are more gentle on metal. Just keep in mind that a smaller grit value means the grit is more coarse. A hand-held sharpener has a fixed angle for the blade, which makes the task easier for beginners. Electric knife sharpeners make the task even more straightforward. A knife sharpener is essential for any kitchen. Pick one up for yourself or for the cooking enthusiast in your life. For more gift ideas, take a look at the knife sets and other kitchen items at HSN. 

Cutting angle – With a manual stick or sharpening stone you set the angle yourself so this does not factor into the equation when choosing that type of sharpener. When shopping for an electric sharpener however it does. You’ll want to decide if you want your knives to have the 15 degree “Asian” style angle so that you can make precise cuts or the Western standard 20 degrees or 22-degree sharpening angle. Most people will opt for the 20 or 22-degree angle simply because their cuisine doesn’t call for a lot of finesse from their knives and those knives are probably of a heavier Western variety anyway.
Our guide attempts to give you the easiest methods for keeping your arsenal of knives sharp and ready. One final item to mention: Serrated knife blades won't work with all types of knife sharpeners. If you're using a pull-through or electric knife sharpener, it needs to have a serrated setting or the blade will lose the serration during sharpening.
Chefs and meat cutters frequently pause and “steel” their cutting edges. Steeling doesn’t sharpen an edge; it straightens it. That’s necessary because the thin edge actually bends or warps while you’re cutting. If you could see the edge under a microscope, it would look wavy, and it would feel dull while cutting. Steeling the knife straightens out all those waves to restore a straight, even cutting edge. So when your knife begins to seem dull, don’t sharpen it—steel it first. Every time you grab a knife for the first time to begin cutting, steel it before you even get started. But it’s important to do it right or you’ll just make the edge worse. And don’t act like one of the Iron Chefs on TV and do it all up in the air—you’ll eventually wind up in the ER. Rest the end of the steel on a cutting board and do your steeling the safer and more accurate way. It’s very important that you steel at an angle between 20 and 30 degrees. Photo 1 shows you how to figure that out.
When starting out sharpening, it won’t be long before you hear about the “toothy” vs “polished” edge. It will suffice to know that a 1k stone is going to give you an edge that will perform beautifully as will a knife finished at 5k. There is a belief that a knife that has a highly polished finish, 5k and up will be so polished that it’s toothy goodness will be erased. This knife will not bite into the skin of a tomato for example because the edge is too polished, it will slide over the top. This is not always true, if the knife has been sharpened well, i.e. if Side A and Side B of the blade meet precisely at the Apex of the knife, that edge will slide into a tomato quite beautifully. I have seen many brand new Japanese knives with highly polished 8k edges that no tomato skin can stand up to.

✅ PREMIUM QUALITY : Our products have been inspected by a reputable third party inspection company. Each product has been checked,put under a durability and functionality test before shipped to you. NO COMPROMISE on quality! This simple-yet-unparalled award winning tool is used by everyone from stay at home moms to various professionals. Don’t forget to buy this as a PERFECT GIFT for your family & friends.


When the stone is intended for use on a flat surface, it is called a Bench Stone. On the other hand, small, portable, hand-held stones are referred to as Pocket Stones. Also, because Pocket Stones are smaller than Bench Stones, they are more easily transported but, they also present difficulty in maintaining a consistent angle and even pressure when attempting to sharpen longer blades. Consequently, Bench Stones are commonly used at home or in camp whereas, Pocket Stones are generally reserved for honing an edge in the field.
http://www.youtube.com/user/MakeSushi1 is all about how to make sushi, we pride ourselves on creating new exciting sushi roll recipes and then sharing them with the world. In our video tutorials we will teach you how to do all a basics of making sushi and create innovative sushi rolls, sashimi, nigiri sushi and possibly might create a new category of sushi , who knows. Subscribe to our YouTube channel to be notified of our weekly sushi videos: http://www.youtube.com/subscription_c...
If no metal is being removed from the edge of the blade, it’s considered honing. Whereas if metal is being removed from the blade edge this is considered sharpening. Certainly, even honing will result in some microscopic amounts of metal being removed from the blade edge but not enough to be visible to the human eye, so the above definition is basically a solid one. 

Using the strength of industrial high precision superior mono-crystalline diamonds, Diamond Machining Technology (DMT) have created a durable longer-lasting flat sharpening surface that will efficiently sharpen, hone, deburr and polish almost any type of knife or cutting tool. The DMT set contains 3 one-sided whetstones that have extra-fine, fine, and coarse grits which means you have a complete sharpening system at your fingertips.
A sharpening stone is a stone that has got a coarse side and usually a finer side, and that is going to take and re-shape your edge and get it back down thin enough in order to sharpen it. You are basically taking something that is blunt and thinning it back down. You have to remove all of this extra metal and get it back down to where it is thin enough to cut. Very simply, all a knife is is a very thin piece of steel to split whatever you are cutting. If the knife is obviously thicker, it is like trying to cut something with a chisel; it is not going to happen.
The word “Novaculite” is derived from the Latin word “novacula”, which means “razor stone” and is essentially a metamorphic, recrystallized, variety of Chert composed mostly of microcrystalline quartz that is found in the found in the Ouachita Mountains of Arkansas and Oklahoma and in the Marathon Uplift of  Deposited in the Devonian Period and the early Mississippian Subperiod some 410 to 325 million years ago and subjected to uplift and folding during the Ouachita orogeny of the Atokan Epoch (early Pennsylvanian Subperiod), Novaculite is a very tough stone that is resistant to erosion and thus, the various layers of Novaculite stand out as ridges in the Ouachita Mountains. Thus, due to both its availability and its composition, it has been mined since ancient times for use as arrowheads and spear heads as well as in more modern times for use as sharpening stones.
×