Different knives are sharpened differently according to grind (edge geometry) and application. For example, surgical scalpels are extremely sharp but fragile, and are generally disposed of, rather than sharpened, after use. Straight razors used for shaving must cut with minimal pressure, and thus must be very sharp with a small angle and often a hollow grind. Typically these are stropped daily or more often. Kitchen knives are less sharp, and generally cut by slicing rather than just pressing, and are steeled daily. At the other extreme, an axe for chopping wood will be less sharp still, and is primarily used to split wood by chopping, not by slicing, and may be reground but will not be sharpened daily. In general, but not always, the harder the material to be cut, the higher (duller) the angle of the edge.
I enjoy these stones so much that the feedback is not a deterrent at all for me, I don’t even think about it. The results are always nothing but top notch, they deliver exactly what I want, some of the sharpest knives I have ever produced were sharpened on Shapton Glass stones. They may be thinner but they last a very long time, they are easy to maintain as well,
Also natural stones have a random grit size that gives a long lasting edge. Basically the random grits create varying sizes of micro-serration in the blade that wear down at a different rate, therefore longer edge retention. Whether this is true or not we really like natural stone, especially for sharpening tradition single bevel Japanese knives. Use natural stones with water – it’s far cheaper than sake.
Mine came plain white then started to darken after a few weeks. About 4 weeks in it settled to a more natural stone/slate grey. The leather has darkened a bit too and remains soft and comfortable. The leather remains easy to adjust and my selected sizings stays in place firmly. Overall It feels, looks and works great. The knot and darker stone/leather compliment each other well.
Our large selection of stones from many well-known manufacturers will allow connoisseurs to find the ideal stone for their needs. Because all manufacturers formulate their stones to emphasize a different mix of qualities, and because these qualities can vary widely between different stones, most woodworkers choose stones from several manufacturers to build up an optimal set of sharpening stones. Then again, once you get to know the characteristics of certain types of stone, you may find one supplier who will provide all the stones you need. Sometimes this can be an advantage. But there is no one size that fits all; each stone must fit your needs and work style.