We’re happy to present something everyone has been waiting for – a combination diamond/ceramic whetstone that will handle all your sharpening needs. The newly-developed DC3 and DC4 whetstones consist of a fine diamond stone (25 micron) and a very special ceramic stone, made of synthetic sapphires. The advantage of these materials, although they get worn, will still keep their flat shape this is important when you sharpen your knife. And, since these materials are the hardest we know of, they will sharpen any steel, even these extremely hard powder steels. You don’t need any lubrication for these stone but now and then you should consider cleaning them with warm water and liquid soap. The stones might feel coarse from the start but will become smoother/better after some use. A leather pouch is included.
The answer to the question of how to choose a single whetstone from among the many is actually one of both purpose and expense. Indeed, as the old adage says: “You get what you pay for” – This is certainly the case with sharpening stones. In fact, as a general rule, a high quality, natural, whetstone is significantly more expensive than a man-made whetstone but, they also tend to produce a noticeably finer edge than man-made stones do. On the other hand, man-made whetstones (with the exception of diamond hones) are very affordable and, just like natural whetstones, they too are available in different grits for different stages in the sharpening process from cutting the initial edge bevel to polishing a finely honed edge.
The goal in sharpening a serration is to maintain the ramp of the serration right to the edge. You do not want to create an edge bevel. Therefore we once again recommend the trusty felt pen trick. Paint the serration to be sharpened and follow your process. Evaluate if you are removing all the black. It should not take more than 5-8 strokes to resharpen if your angle was correct. Rotate or spin the sharpener as you go for the most even, consistent sharpening.