One of the most well-regarded natural whetstones is the yellow-gray "Belgian Coticule", which has been legendary for the edge it can give to blades since Roman times, and has been quarried for centuries from the Ardennes. The slightly coarser and more plentiful "Belgian Blue" whetstone is found naturally with the yellow coticule in adjacent strata; hence two-sided whetstones are available, with a naturally occurring seam between the yellow and blue layers. These are highly prized for their natural elegance and beauty, and for providing both a fast-cutting surface for establishing a bevel and a finer surface for refining it. This stone is considered one of the finest for sharpening straight razors.[citation needed]

Understanding Grit: You’ll see a bunch of numbers being thrown around when discussing the grit of a sharpening stone. The number refers to the size of the grit. The larger the number, the finer the grit. A good beginner stone would be a two-sided stone with #400 and #1000 grit. The #400 grit is the courser stone for working out the nicks and imperfections, the #1000 grit is for refining.
at the end, metal is going to vanish. Don’t start with a Dollar Store knife, start with a medium quality 8 inch (203mm) that has not been sharpened beyond the factory before you. You want to set the sharpening stage for success, a cheap knife is hard to sharpen because of the inferior quality of the steel. Now if you are worried about scratching the blade of the knife, you shouldn’t be but if that apprehension is going to distract you, eliminate the fear by taping the blade of the knife with painters tape, just the blade, not the edge.
2. Although I’ve been sharpening knives for a while, I never could get a knife sharp using the freehand method, I’ve had to rely on various jigs to set & maintain a constant angle to the bevel. To begin with, the Lanksy knife sharpener kit was my main tool, but then I found a South African jig made by Warthog Knife Sharpeners. I still have their first model, which, if memory serves me, came out in the late 1990’s. This has since been upgraded & is supplied with a diamond stone, which is worthless unless it’s going to be used for ceramic knives. However-the Warthog & the Warthog Multi-Blade’s modus operandi has the knife moving ABOVE the stone, unlike the Lanksy / Edge Pro / Edge Pro Chinese copies & variants. ( No oil / water dripping off the stone from above the knife). Also, the Warthogs use any bench-size whetstone available to its owner, a very big plus if you want to use your grand-dad’s old Arkansas stone.No tie in having to buy the manufacturer’s specialised stones which work only with one type of sharpening jig.
Serrated blades have a grind on one side of the blade. Only sharpen the grind side of the blade. Hold the sharpener at the angle that matches the original edge angle. Hold the knife with the edge away from you and the serrated side of the edge facing up. Set the tapered diamond sharpener in a serration so that you fill the indentation. Draw the sharpener towards the edge.
The type of stone refers to the material it is made with. You can find many different types, including diamond, ceramic, natural stone, and synthetic. I would only suggest diamond if you’re planning to be sharpening only ceramic knives. Many of the stones you’ll find on Amazon or other retails are made of Corundum, which is a crystalline form of aluminium oxide. It’s a fine choice for a beginner sharpening stone.
A: For many years there was a heated debate around this topic with manufacturer’s stating flatly the notion their products actually damaged knives was absurd, and many professional chefs claiming not only was it not absurd, it was common for mechanical sharpeners to damage expensive cutlery. So who was right? To a certain extent they both were. The manufacturers were correct in asserting that if you followed the instructions to the letter there was little if any chance your knives would be damaged. However, in reality few people actually followed the instructions to the letter and when they veered from the recommended course the potential was there for damage.
All rights reserved. WARNING - Under the Liquor Control Reform Act 1998 it is an offence to supply alcohol to a person under the age of 18 years (Penalty Exceeds $17000). It is an offence for a person under the age of 18 years to purchase or receive liquor (Penalty exceeds $700). This web site is operated by Chef’s Armoury. ABN 62 001 477 014. Liquor Licence 36129161.
Sharp knives make the culinary world go round but finding the best knife sharpener isn’t as simple as walking into the store (do people still walk into stores?) and grabbing the first sharpener that presents itself. There are different types of electric sharpeners, some that are straightforward and some whose sharpening process involves as many as 3 or 4 stages. If you’re looking to keep things simple by using a sharpening stone well, there are 3 different types of them as well – oil, water and diamond – and they each have their pros and cons. So it can be confusing.
It will be tempting to raise the angle here to get to the edge quickly, that is not the way to go. Re-paint the edge/bevel if necessary and try again. You can flip the knife prior to burr formation and work on the opposite side. Repeatedly feel for the burr with your thumb by running it very gently down the blade and over the edge, if the burr is there it will be very obvious, you need to create the burr along the entire length of the blade. Once you have done that, (you have accomplished what most people will never try) but besides that, you have to do the same to the other side of the blade.

Different knives are sharpened differently according to grind (edge geometry) and application. For example, surgical scalpels are extremely sharp but fragile, and are generally disposed of, rather than sharpened, after use. Straight razors used for shaving must cut with minimal pressure, and thus must be very sharp with a small angle and often a hollow grind. Typically these are stropped daily or more often. Kitchen knives are less sharp, and generally cut by slicing rather than just pressing, and are steeled daily. At the other extreme, an axe for chopping wood will be less sharp still, and is primarily used to split wood by chopping, not by slicing, and may be reground but will not be sharpened daily. In general, but not always, the harder the material to be cut, the higher (duller) the angle of the edge.

The Chef’s Choice 476 2-Stage Sharpener transforms your weary kitchen, hunting and pocket knives into razor sharp cutting instruments with dependable ease. The sharpener is simple in concept, solid in its fabrication and reliable in the way it goes about its business. The design is also free of right-hand bias which is good news for the lefty chefs out there.