Table mounted device – Typically the manual powered table mounted sharpener looks virtually identical to the electric powered sharpener with a slot for each stage. Where they differ is that each slot in the manual powered sharpener has only one groove and you pull the blade through this groove toward you to sharpen the blade. Once the blade is sufficiently sharp you place it in the honing groove to refine the edge and pull it toward you again several times. If there is a third, cleaning, stage you repeat the process for that stage as well.
If you don’t have a problem with the water-lubrication system in your working environment, Waterstones is the most common and affordable models to obtain. They are available in various abrasive grit grade from coarse to extra fine mesh. They generally made by Aluminum Oxide, which provides faster cutting. The downside of the Waterstone, they wear down more quickly as the impact of the old abrasive materials that break the stone itself. It is why Waterstone requires frequent flattening to keep it evenly. It is recommended you have one of diamond stones to help you for regular flattening become easier.

Just to prove that we're not merely sharpening geeks, here's an interesting side note. The word whet pops up in some unexpected places. A small species of owl is called the saw-whet owl because the sound it makes reminded people of the sound made when sharpening a saw with a file. And the phrase "to whet your appetite" comes from the idea of your hunger growing sharper at the thought of food.


I really like this stone. The 1000/4000 grit combination is perfect for my needs. I'm a woodturner, and belong to a club that brings in professional turners from around the world. One had an eye opening test of sharpness. He stacked around 25 new razor blades in a box with one open side. The box assured that the blades were in perfect alignment. If you looked at the blades' sharp ends head on, all you saw was black. His point was that if you can see the edge, the blade is not sharp. Any reflection from the edge, again, facing it head on, is a dull spot. My long story leads to the fact that I was able to sharpen several knives to the point of not seeing the edge. This is not the stone to use if you are trying to remove nicks from a blade. A lower grit will do that job. This is for putting a fine, "invisible" edge on the blade, and with the right technique, that's what it will do. Another thing to consider is the fact that these stones are "sacrificial" A stone wears because it is deliberately giving up dull surface particles to expose the sharp ones below them. Anyone expecting a stone to last forever is mistaken. Bottom line? I think this is a great stone that takes my knives to the level of sharpness I need in both woodworking and cooking. I also like the rubber frame it sits in, giving you much better control over the stone. Your efforts can go into sharpening without having to steady the stone on your workbench or countertop.
"How do I use this daunting metal rod?" I hear you ask. Well, it's not too hard, really. The best way for a beginner is to balance the steel on a surface with the tip secured by a damp tea towel. You want to get that angle right, whether it's around 15 degrees for a Japanese knife or 20 degrees on a German or French blade. Then swipe slowly down, away from you, making sure the whole blade is honed – around five swipes on each side should do. 

Whichever method you choose, be it a waterstone (also known as a whetstone), or a pull-through (either V-shaped or ceramic wheels) it's important to regularly hone your knife with a honing steel, which we'll also cover below. You'll be pleased to hear that you won't have to reach for the stones too regularly – once every two or three months should suffice. 


At age 10, Terada learned the basics of sushi from his father and then went on to attend RKC Chef's School in Kochi, Japan from 1987-1989. He soon earned a nickname for his fast knife, attention to detail, divine presentation and ability to create new dishes and accents based on traditional Japanese cuisine. After graduating RKC Chef School, he was called to serve under Master Chef Kondo at Yuzuan restaurant in Kochi, Japan from 1989-1992. Mr. Kondo is the master of Kansai style cooking, considered to be the high-end of Japanese cuisine. Terada earned the title Master Sushi Chef by becoming the standing head sushi chef & can serve Fugu (Japan Licensed) to the public.
Unfortunately, the arrays of modern whetstone can be bewildering to the inexperienced sharpeners that so often times many of them end up with a crap or wrong decision on stone type for their utensils. The most difficult to determine is whether the whetstone is fake or fabricated with low quality of materials. To avoid this you can only go for the reliable brand of a whetstone.
Ye olde tomato test - After you have sharpened using one of the above sharpeners grab a firm tomato and try to slice it. If the blade is properly sharpened it will slice through the skin with virtually no effort and without pushing the skin inward first. If the skin is able to fight back against the blade then your knives are not properly sharpened yet.
The final Chef’s Choice sharpener on our list is the 316 Diamond Sharpener. Like the 15XV the 316 is at its best when used to sharpen Asian-style knives and it does so with unflinching effectiveness and speed. This is a compact, 2-stage electric sharpener that produces the 15 degree edge so favored in Asian cutlery. Ideal for the preparation of sashimi or sushi.
at the end, metal is going to vanish. Don’t start with a Dollar Store knife, start with a medium quality 8 inch (203mm) that has not been sharpened beyond the factory before you. You want to set the sharpening stage for success, a cheap knife is hard to sharpen because of the inferior quality of the steel. Now if you are worried about scratching the blade of the knife, you shouldn’t be but if that apprehension is going to distract you, eliminate the fear by taping the blade of the knife with painters tape, just the blade, not the edge.
Your stroke can be straight or circular, from "hilt to tip" OR "tip to hilt," whichever is more comfortable. If you're using a small portable sharpener, stroke the blade in nearly a straight direction. Remember to always cut into the stone and never pull or drag your edge backwards. The blade edge should face in the same direction as your stroke. So, you're essentially moving the metal away from the edge. We recommend the circular stroke as it helps you maintain your angle instead of having to find it every time you lift the knife from the stone.
The Whetstone 2-Sided Sharpening Stone is made from professional grade corundum and will sharpen everything from a razor blade to a cleaver and even a machete, should you happen to have a machete lying about that needs sharpening. This is the simplest type of sharpener it’s true but the company have obviously put a great deal of thought into the product.
Technically, the name whetstone can be applied to any form of sharpening stone, regardless of what cutting fluid is typically used with it. However because whet sounds like wet, many hear the word and assume that it refers to a stone that is used wet with water. Actually, water stones, oil stones diamond stones and ceramic stones are all forms of whetstones. So, while all water stones are whetstones, not all whetstones are water stones.
With its premium series Select II, the whetstone manufacturer Sigma Power Corporation from Tokyo addresses users of high-alloy steels such as HSS. These stones, too, are obviously intended to engender a grinding experience similar to that of natural stones. The special production process is expensive, but the Sigma Select II probably has no equal when it comes to demolishing steel.
When you want to learn how to sharpen a pocket-knife on a sharpening stone, your pocket knife isn't going to get sharp in one stroke. You have to have at least a stone bar that's the minimum of 2x6 inches in measurement. In general, it'll help make the sharpening of the blade easier. When you sharpen it on a stone, you have the three main options: ceramic stones, whetstones, and diamond stones.
Some recommended products may use affiliate links. ProHuntingKnife.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com. Amazon and the Amazon logo are trademarks of Amazon.com, Inc or its affiliates.
Cerax and Suehiro stones from Suehiro are a little harder, and as such do not wear down as quickly as the classic Japanese water stones. The 8000 grit stone will perhaps give you the best cutting edge with a mirror polish on chisels and similar blades. Suehiro also makes a small combination stone for those who do not sharpen tools all that often and are reluctant to spend extra for a Cerax stone.

I am just starting out sharpening with whet stones. I have found these stones to be very nice and the instructional videos that come along with the set on knifeplanet are extremely helpful to anyone starting out. The cost of the set was very reasonable and seems to be a great value. The customer service is amazing, I lost the site for the videos and sent an email to get the information and immediately there was a reply with all of the links that I needed. I appreciate their attention to their customers!!

Japanese water stones – both natural and synthetic – are known for their superior sharpening performance, not only for Japanese tools, but also on their Western equivalents. The loosely bonded abrasive grit is washed out very quickly, as it blunts during the sharpening process; this exposes new, sharp, particles that can get to work on the blade. Water stones are lubricated only with water! Never use oil!


An important but often confusing area of sharpening is knowing when you're done with one stone and ready for the next finer grit. On coarse stones it is very easy. When you sharpen one side you will notice a burr forming on the opposite side of the edge. This burr is hard to see but is easy to feel. Very carefully feel for the burr by gently running your hand from the spine to the edge. (Do not run your finger along the knife edge from heel to tip, that's only asking for trouble!) A burr is formed when your stone removes material directly at the edge. The burr will move from one side of your knife to another as you alternate sharpening sides. Make sure you have felt the burr jump between both sides before you move on to the next finer stone. That will ensure that you have sharpened both sides effectively. The finer grits are done the same way but the burr is much smaller. On the finest grits you may not be able to notice the burr at all. Testing the knife sharpness will tell you when you're done. (Learn how you can test to see if your knife is sharp.)
×